2005 Seat Alhambra ignition

Driving144
situation, an e ec
co
on
no
om
my
y
, low-consumption, or a more “s sp
po
or
rt
ty
y
”
programme will be selected.
The programme is selected a au
ut
to
om
ma
at
ti
ic
ca
al
ll
ly
y
depending on the
movement of the accelerator pedal.
If the accelerator pedal is moved s sl
lo
ow
wl
ly
y
, or at a n no
or
rm
ma
al
l
rate, the
gearbox will shift into a higher gear earlier, and down into a lower
gear later to r re
ed
du
uc
ce
e ffu
ue
el
l cco
on
ns
su
um
mp
pt
ti
io
on
n
.
A more “s sp
po
or
rt
ty
y
” programme is selected when the accelerator pedal
movesf fa
as
st
t
. The pedal does not have to be depressed to the point
ofk ki
ic
ck
k-
-d
do
ow
wn
n
⇒page 146. In this mode, the gearbox will shift up
later to make full use of the engine power reserves.
The downward shift occurs at a higher rate of revolutions than in
the economy programmes.
The gear box is self adapting, and continuously selects the most
suitable gear programme. At the same time, the driver can also
make the gear box switch to a more “sporty” programme by
pressing the accelerator quickly. Depending on road speed, this
makes the gearbox shift down early into a lower gear for quicker
acceleration (for instance to overtake another vehicle), without
having to press the accelerator all the way down to the kick-down
position. After the gear box has shifted back up it returns to the
original programme, depending on your style of driving.
The gear box adapts the gear shifts for uphill and downhill
gradients. This prevents the gearbox from shifting up and down
unnecessarily on uphill gradients. On downhill gradients, the
gearbox shifts down into a lower gear when the driver presses the
brake pedal. This makes use of the braking effect of the engine
without having to change down manually.N No
ot
te
e
Depending on road resistance, for example when trailer towing or on uphill
stretches, a programme is automatically selected which provides more
power by shifting into a lower gear. This prevents frequent gear changes.
K
Selector lever lock
In positions “P P
” and “N N
” with the ignition switched on the selector
lever is locked. To move the selector lever out of these positions
the brake pedal must be depressed and the selector lever button
pushed-in. This prevents a gear being engaged inadvertently and
the vehicle unintentionally moving off.
A delay circuit prevents the selector lever from locking when it is
moved quickly past the “N N
” position (for instance from “R R
” to “D D
”).
This enables for example the vehicle to be “rocked” out of a
“bogged down” position. The shift lock only locks the selector
lever if it is left in the “N N
” position for more than about 1 second
without the brake pedal being depressed.
At speeds above 5 km/h the selector lever lock is automatically
switched-off in position “N N
”.
S Sa
af
fe
et
ty
y iin
nt
te
er
rl
lo
oc
ck
k ffo
or
r iig
gn
ni
it
ti
io
on
n kke
ey
y
The key can only be withdrawn with the ignition switched off and
the selector lever in position “P P
” (parking lock).
W Wh
he
en
n tth
he
e iig
gn
ni
it
ti
io
on
n kke
ey
y iis
s rre
em
mo
ov
ve
ed
d,
, tth
he
e sse
el
le
ec
ct
to
or
r lle
ev
ve
er
r iis
s llo
oc
ck
ke
ed
d iin
n
p po
os
si
it
ti
io
on
n PP.
.
K

Driving145
Safety FirstControls and equipment Tips and Maintenance Technical Data
Selector lever positions
In the combi-instrument there is a display that shows the selector
lever position currently selected.
P P –– PPa
ar
rk
ki
in
ng
g llo
oc
ck
k
The driving wheels are locked mechanically.
The parking lock may only be engaged when the vehicle is
stationary. Before moving the lever in or out of the “P P
” position thelock button in the selector lever handle must be pressed. Before
moving the selector lever out of the “P P
” position with the ignition
switched on, the brake pedal must also be depressed.
R R –– RRe
ev
ve
er
rs
se
e gge
ea
ar
r
The reverse gear should only be engaged when the vehicle is
stationary and with the engine idling. Before engaging the position
“R R
” from the positions ”P P
” or “N N
” the brake pedal must be
depressed and the lock button in the selector lever handle must
also be pressed.
The reversing lights come on then the selector lever is in the “R R
”
position with the ignition switched on.
N N –– NNe
eu
ut
tr
ra
al
l ((i
id
dl
li
in
ng
g ppo
os
si
it
ti
io
on
n)
)
To move the lever out of neutral when stationary or at speeds
below 5 km/h and with ignition switched on depress the brake
pedal and press the lock button in the selector lever handle.
D D –– NNo
or
rm
ma
al
l ddr
ri
iv
vi
in
ng
g ppo
os
si
it
ti
io
on
n
The four forward gears are shifted up and down automatically
depending upon engine load and road speed.
Under certain driving conditions it is advantageous to engage one
of the following described selector lever positions.
3 3 –– PPo
os
si
it
ti
io
on
n ffo
or
r ““h
hi
il
ll
ly
y”
” rre
eg
gi
io
on
ns
s
The 1 1s
st
t
, 2 2n
nd
d
and 3 3r
rd
d
gears are shifted up and down automatically
depending upon engine load, road speed and selected programme
(E or S). The 4 4t
th
h
gear is not engaged. This increases the engine
braking effect when the accelerator pedal is released.
Fig. 141
N Ne
ev
ve
er
r ssh
hi
if
ft
t sse
el
le
ec
ct
to
or
r lle
ev
ve
er
r tto
o ppo
os
si
it
ti
io
on
n ““R
R”
” oor
r ““P
P”
” wwh
hi
il
ls
st
t tth
he
e vve
eh
hi
ic
cl
le
e iis
s iin
n
m mo
ot
ti
io
on
n.
. TTh
he
e gge
ea
ar
rs
s cco
ou
ul
ld
d bbe
e dda
am
ma
ag
ge
ed
d –– rri
is
sk
k oof
f aac
cc
ci
id
de
en
nt
t!
!
W
WA
AR
RN
NI
IN
NG
G

6
7
8
1/min
x1000
0 20 4060
3050
Km/h
C
AL0-121

Driving149
Safety FirstControls and equipment Tips and Maintenance Technical Data
A Au
ut
to
om
ma
at
ti
ic
c gge
ea
ar
r llo
oc
ck
k
When the ignition is switched on the selector lever is locked in the
positions "P P
" and "N N
".
To unlock press the brakes. This way, you will prevent involuntary
shifting of gears and moving of the vehicle.
When the selector lever is in the positions "P P
" and "N N
" the driver
will see a display on the digital screen of the instrument panel with
the message "PRESS BRAKES TO SHIFT GEAR WHILE CAR
STATIONARY". Furthermore, the shift area will display the symbol
which appeared earlier.
The selector lever lock is automatically unlocked in the "N N
" position
if the speed of 5 km/h is exceeded.
L Lo
oc
ck
k bbu
ut
tt
to
on
n
The lock button for the selector lever prevents the involuntary shift
of gears. By pressing this button the lever is unlocked.
The fig. 144shows the positions in which the button in the lever
must be pressed.
L Lo
oc
ck
k ffo
or
r rre
em
mo
ov
va
al
l oof
f iig
gn
ni
it
ti
io
on
n kke
ey
y
Once the ignition is switched on the key can only be removed if the
lever is in the position "P P
" (parking lock).
O On
nc
ce
e tth
he
e kke
ey
y iis
s rre
em
mo
ov
ve
ed
d tth
he
e sse
el
le
ec
ct
to
or
r lle
ev
ve
er
r rre
em
ma
ai
in
ns
s llo
oc
ck
ke
ed
d iin
n tth
he
e
p po
os
si
it
ti
io
on
n ""P
P"
".
.
K
H
Ha
an
nd
db
br
ra
ak
ke
e
Using the handbrake
To apply the handbrake pull lever up firmly. On hills the 1st gear or
with automaticgearbox the parking lock should also be engaged.
The handbrake should always be applied so firmly that it is not
possible to drive inadvertently with the handbrake on.
When handbrake is applied with the ignition on, the brake warning
lamp comes on.
To release handbrake, pull lever up slightly, press locking knob
(arrow) in and push lever right down.
Fig. 145TO8-029


Driving150
I Ig
gn
ni
it
ti
io
on
n llo
oc
ck
k
Electronic engine block
When you switch the ignition on, the vehicle and the key
automatically compare data, which is shown by a warning lamp in
the dashboard
⇒"Warning lamps" chapter.
If the wrong (i.e. false) key is used, the car will not start and the
immobiliser warning lamp will come on.
K
Position of the ignition key
P Pe
et
tr
ro
ol
l een
ng
gi
in
ne
es
s
1Ignition and engine switched off:
Steering can be locked.
2Ignition on
3Starting engine
D Di
ie
es
se
el
l een
ng
gi
in
ne
es
s
1Fuel supply cut off and engine switched off:
Steering can be locked.
2Glow plugs/normal running position
To avoid unnecessary strain on the battery, do not use any other
major electrical equipment while the glow plugs are pre-heating.
3Starting engine
• • TTo
o ppr
re
ev
ve
en
nt
t tth
he
e vve
eh
hi
ic
cl
le
e rro
ol
ll
li
in
ng
g aaw
wa
ay
y iin
na
ad
dv
ve
er
rt
te
en
nt
tl
ly
y,
, yyo
ou
u ssh
ho
ou
ul
ld
d aal
lw
wa
ay
ys
s
a ap
pp
pl
ly
y tth
he
e hha
an
nd
db
br
ra
ak
ke
e ffi
ir
rm
ml
ly
y aaf
ft
te
er
r tth
he
e vve
eh
hi
ic
cl
le
e hha
as
s cco
om
me
e tto
o aa cco
om
mp
pl
le
et
te
e sst
to
op
p.
.
Y Yo
ou
u ssh
ho
ou
ul
ld
d aal
ls
so
o ppu
ut
t tth
he
e cca
ar
r iin
nt
to
o gge
ea
ar
r ((m
ma
an
nu
ua
al
l gge
ea
ar
rb
bo
ox
x)
) oor
r tth
he
e gge
ea
ar
r sse
el
le
ec
ct
to
or
r
l le
ev
ve
er
r iin
n ppo
os
si
it
ti
io
on
n ““P
P”
” ((a
au
ut
to
om
ma
at
ti
ic
c gge
ea
ar
rb
bo
ox
x)
).
.
• • PPl
le
ea
as
se
e nno
ot
te
e tth
ha
at
t tth
he
e hha
an
nd
db
br
ra
ak
ke
e mmu
us
st
t bbe
e rre
el
le
ea
as
se
ed
d cco
om
mp
pl
le
et
te
el
ly
y aaf
ft
te
er
r
a ap
pp
pl
li
ic
ca
at
ti
io
on
n.
. IIf
f tth
he
e hha
an
nd
db
br
ra
ak
ke
e iis
s oon
nl
ly
y ppa
ar
rt
tl
ly
y rre
el
le
ea
as
se
ed
d iit
t cco
ou
ul
ld
d lle
ea
ad
d tto
o
o ov
ve
er
rh
he
ea
at
ti
in
ng
g oof
f tth
he
e bbr
ra
ak
ke
es
s aan
nd
d tth
hu
us
s nne
eg
ga
at
ti
iv
ve
el
ly
y aaf
ff
fe
ec
ct
t tth
he
e ffu
un
nc
ct
ti
io
on
n oof
f tth
he
e
b br
ra
ak
ke
e ssy
ys
st
te
em
m.
. TTh
hi
is
s cco
ou
ul
ld
d aal
ls
so
o lle
ea
ad
d tto
o ppr
re
em
ma
at
tu
ur
re
e rre
ea
ar
r bbr
ra
ak
ke
e lli
in
ni
in
ng
g wwe
ea
ar
r.
.
K
W WA
AR
RN
NI
IN
NG
G
2
3
1
B8D-005Fig. 146


Driving151
Safety FirstControls and equipment Tips and Maintenance Technical Data
F Fo
or
r aal
ll
l vve
eh
hi
ic
cl
le
es
s:
:
• • PPo
os
si
it
ti
io
on
n
1
To lock the steering wheel withdraw the key and turn the wheel
until you hear the pin engage.
In vehicles with automatic gearbox the key can only be turned to
position
1and withdrawn when the selector lever is in the “P P
”
position.
• P Po
os
si
it
ti
io
on
n
2
If the key is difficult to turn in the lock, move the steering wheel
until the key turns freely.
• • PPo
os
si
it
ti
io
on
n
3
Before the starter can be operated a second time the key must be
turned back to position 1. This prevents the starter motor from
engaging while the engine is running, as this could damage the
starter.
K
Ignition key lock*
On vehicles with an automatic gearbox* after switching off the
ignition the ignition key can only be withdrawn if the selector lever
is in the “P P
” position.When the ignition key has been withdrawn the selector lever is
locked in this position.
K
S St
ta
ar
rt
ti
in
ng
g tth
he
e een
ng
gi
in
ne
e
General notes
• Before starting, move gear lever to neutral (with automatic
gearbox, selector lever in “P P
” or “N N
” position) and apply handbrake
firmly.
• On vehicles with a manual gearbox depress the clutch pedal
when operating starter so that starter only has to turn engine.
• As soon as engine starts, release the ignition key so that starter
can disengage.
• After starting a cold engine it may sound noisy for a moment or
two because the oil pressure has to build up in the hydraulic
tappets first. This is normal and no cause for alarm.

O On
n vve
eh
hi
ic
cl
le
es
s wwi
it
th
h mma
an
nu
ua
al
l gge
ea
ar
rb
bo
ox
x,
, nne
ev
ve
er
r rre
em
mo
ov
ve
e tth
he
e kke
ey
y ffr
ro
om
m tth
he
e sst
te
ee
er
ri
in
ng
g
l lo
oc
ck
k wwh
hi
il
le
e tth
he
e vve
eh
hi
ic
cl
le
e iis
s mmo
ov
vi
in
ng
g.
. OOt
th
he
er
rw
wi
is
se
e tth
he
e sst
te
ee
er
ri
in
ng
g wwh
he
ee
el
l mma
ay
y llo
oc
ck
k
u un
ne
ex
xp
pe
ec
ct
te
ed
dl
ly
y.
.
W
WA
AR
RN
NI
IN
NG
G
W Wh
he
en
n rru
un
nn
ni
in
ng
g tth
he
e een
ng
gi
in
ne
e iin
n cco
on
nf
fi
in
ne
ed
d ssp
pa
ac
ce
es
s tth
he
er
re
e iis
s aa dda
an
ng
ge
er
r oof
f
p po
oi
is
so
on
ni
in
ng
g.
.
W
WA
AR
RN
NI
IN
NG
G

Driving152
F Fo
or
r tth
he
e ssa
ak
ke
e oof
f tth
he
e een
nv
vi
ir
ro
on
nm
me
en
nt
t
Do not warm engine up by running it with vehicle stationary. Drive off
straight away.
• Do not over-rev or use full throttle until the engine has reached
the normal operating temperature.
• • OOn
n vve
eh
hi
ic
cl
le
es
s wwi
it
th
h aa cca
at
ta
al
ly
yt
ti
ic
c cco
on
nv
ve
er
rt
te
er
r tth
he
e een
ng
gi
in
ne
e mmu
us
st
t nno
ot
t bbe
e
s st
ta
ar
rt
te
ed
d bby
y tto
ow
wi
in
ng
g tth
he
e vve
eh
hi
ic
cl
le
e iin
n eex
xc
ce
es
ss
s oof
f
5 50
0 mm.
. OOt
th
he
er
rw
wi
is
se
e uun
nb
bu
ur
rn
ne
ed
d ffu
ue
el
l cca
an
n ppa
as
ss
s iin
nt
to
o tth
he
e cco
on
nv
ve
er
rt
te
er
r aan
nd
d
l le
ea
ad
d tto
o dda
am
ma
ag
ge
e.
.
• • BBe
ef
fo
or
re
e ttr
ry
yi
in
ng
g tto
o sst
ta
ar
rt
t tth
he
e een
ng
gi
in
ne
e bby
y tto
ow
wi
in
ng
g,
, aan
n aat
tt
te
em
mp
pt
t ssh
ho
ou
ul
ld
d bbe
e
m ma
ad
de
e,
, iif
f ppo
os
ss
si
ib
bl
le
e,
, tto
o uus
se
e tth
he
e bba
at
tt
te
er
ry
y oof
f aan
no
ot
th
he
er
r vve
eh
hi
ic
cl
le
e
⇒"
"S
St
ta
ar
rt
t uup
p
h he
el
lp
p"
" cch
ha
ap
pt
te
er
r.
.
K
Petrol engines
These engines are equipped with a petrol injection system that
automatically supplies the correct fuel/air mixture at all ambient
temperatures.
W Wh
he
en
n een
ng
gi
in
ne
e iis
s cco
ol
ld
d oor
r aat
t oop
pe
er
ra
at
ti
in
ng
g tte
em
mp
pe
er
ra
at
tu
ur
re
e ddo
o nno
ot
t aac
cc
ce
el
le
er
ra
at
te
e
before or during the starting procedure.
If the engine does not start at once, stop using the starter after 10
seconds. wait about half a minute and then try again.
If the engine still does not start, the electric fuel pump fuse may
have blown
⇒"Fuses" chapter.
W Wh
he
en
n tth
he
e een
ng
gi
in
ne
e iis
s vve
er
ry
y hho
ot
t
it may be necessary to accelerate
slightly after the engine has started.
K
Diesel engines
G Gl
lo
ow
w ppl
lu
ug
g ssy
ys
st
te
em
m
After switching to the driving position (ignition on), the required
glow plug warm-up time is indicated by a lamp which is controlled
by the coolant temperature
⇒"Instruments" chapter.
S St
ta
ar
rt
ti
in
ng
g aa cco
ol
ld
d een
ng
gi
in
ne
e
Ambient temperature above +5°C:
The engine can be started without preglow. Do not depress throttle
during the starting procedure.
Ambient temperature below +5°C:
• Turn the key in the ignition lock to position
2⇒ fig. 146⇒
"Ignition lock" chapter – the glow plug warning lamp comes on. It
goes out when the ignition temperature is reached.
W Wh
hi
il
le
e tth
he
e ggl
lo
ow
w ppl
lu
ug
gs
s aar
re
e wwo
or
rk
ki
in
ng
g ddo
o nno
ot
t ssw
wi
it
tc
ch
h oon
n aan
ny
y hhe
ea
av
vy
y
c cu
ur
rr
re
en
nt
t cco
on
ns
su
um
me
er
rs
s bbe
ec
ca
au
us
se
e tth
hi
is
s wwo
ou
ul
ld
d ppl
la
ac
ce
e aan
n uun
nn
ne
ec
ce
es
ss
sa
ar
ry
y llo
oa
ad
d
o on
n tth
he
e bba
at
tt
te
er
ry
y.
.
If despite this the engine does not start, the fuse may have blown
⇒"Fuses" chapter.
• When the warning lamp goes out, start the engine immediately.
Do not depress the accelerator while starting.
If the engine only fires irregularly, continue to operate the starter a
few seconds longer (30 seconds at maximum) until the engine
runs under its own power.


Driving153
Safety FirstControls and equipment Tips and Maintenance Technical Data
If the engine does not start, switch the glow plugs on again and try
starting it again as described.
S St
ta
ar
rt
ti
in
ng
g aa wwa
ar
rm
m een
ng
gi
in
ne
e
The glow plug lamp does not come on – the engine can be started
straight away.
K
Starting after running out of fuel
If the tank on vehicles with a diesel engine was empty, starting
after filling with diesel fuel can take longer than normal – up to
one minute. This is because the fuel system must first be freed of
air before starting.
K
S St
to
op
pp
pi
in
ng
g tth
he
e een
ng
gi
in
ne
e
Valid for all engines
C
Ca
au
ut
ti
io
on
n
When the engine has been subjected to a heavy engine load for a long
time, the engine must not be switched off abruptly. Let it idle for about 2
minutes to avoid overheating.
Valid for all versions with catalytic converter*
C Ca
au
ut
ti
io
on
n
Do not switch off the ignition while the vehicle is in motion with a gear
engaged; otherwise unburned fuel may go into the converter, where it
would burn and cause overheating, which would damage the converter.
K
A Af
ft
te
er
r tth
he
e een
ng
gi
in
ne
e hha
as
s bbe
ee
en
n sst
to
op
pp
pe
ed
d tth
he
e ffa
an
n cca
an
n cco
on
nt
ti
in
nu
ue
e rru
un
nn
ni
in
ng
g ffo
or
r aa wwh
hi
il
le
e
( (u
up
p tto
o aab
bo
ou
ut
t 110
0 mmi
in
nu
ut
te
es
s)
) wwi
it
th
h tth
he
e iig
gn
ni
it
ti
io
on
n ssw
wi
it
tc
ch
he
ed
d oof
ff
f.
. IIt
t cca
an
n aal
ls
so
o sst
ta
ar
rt
t tto
o
r ru
un
n aag
ga
ai
in
n ssu
ud
dd
de
en
nl
ly
y aaf
ft
te
er
r aa ssh
ho
or
rt
t tti
im
me
e iif
f
– – tth
he
e cco
oo
ol
la
an
nt
t tte
em
mp
pe
er
ra
at
tu
ur
re
e iin
nc
cr
re
ea
as
se
es
s ddu
ue
e tto
o hhe
ea
at
t bbu
ui
il
ld
d-
-u
up
p
– – wwh
he
en
n tth
he
e een
ng
gi
in
ne
e iis
s hho
ot
t aan
nd
d tth
he
e een
ng
gi
in
ne
e cco
om
mp
pa
ar
rt
tm
me
en
nt
t iis
s hhe
ea
at
te
ed
d
a ad
dd
di
it
ti
io
on
na
al
ll
ly
y bby
y sst
tr
ro
on
ng
g ssu
un
nl
li
ig
gh
ht
t.
.
S Sp
pe
ec
ci
ia
al
l cca
ar
re
e mmu
us
st
t tth
he
er
re
ef
fo
or
re
e bbe
e tta
ak
ke
en
n wwh
he
en
n wwo
or
rk
ki
in
ng
g iin
n tth
he
e een
ng
gi
in
ne
e
c co
om
mp
pa
ar
rt
tm
me
en
nt
t.
.
K
W WA
AR
RN
NI
IN
NG
G

Driving156
V Ve
eh
hi
ic
cl
le
es
s wwi
it
th
h aau
ut
to
om
ma
at
ti
ic
c gge
ea
ar
r bbo
ox
x:
:
T Th
he
e ssy
ys
st
te
em
m iis
s tte
em
mp
po
or
ra
ar
ri
il
ly
y ssw
wi
it
tc
ch
he
ed
d oof
ff
f
when the brake or clutch
pedals are used or when the switch
⇒ fig. 148Ais moved to AUS
(not engaged).
The speed stored at this time willr re
em
ma
ai
in
n
in the memory.
To r re
es
su
um
me
e
the previously stored speed push switch
⇒ fig. 148A
fully to the left after the brake or clutch pedals are released.
Furthermore, the system w wi
il
ll
l bbe
e ssw
wi
it
tc
ch
he
ed
d oof
ff
f tte
em
mp
po
or
ra
ar
ri
il
ly
y
if the
selector lever is moved to positionsN N
or 1 1
.
The speed stored in the memory at this time w wi
il
ll
l bbe
e dde
el
le
et
te
ed
d
.
S St
to
or
ri
in
ng
g ssp
pe
ee
ed
d
If no speed was saved before the system was temporarily switched
off or if the stored speed was deleted, a new speed can be stored
in the following manner:• Move switch
⇒ fig. 148Afully to the left and hold until the
desired speed has been reached. The speed is stored when the
switch is released.
o or
r
• Press button
⇒ fig. 148Bbriefly. The current speed is stored.K
Switching the system off completely
V
Ve
eh
hi
ic
cl
le
es
s wwi
it
th
h aa mma
an
nu
ua
al
l gge
ea
ar
r bbo
ox
x:
:
The system isc co
om
mp
pl
le
et
te
el
ly
y ssw
wi
it
tc
ch
he
ed
d oof
ff
f
when switch
⇒ fig. 148A
is moved entirely to the right (OFF engaged) or when the vehicle is
stopped and the ignition is switched off.
V Ve
eh
hi
ic
cl
le
es
s wwi
it
th
h aau
ut
to
om
ma
at
ti
ic
c gge
ea
ar
r bbo
ox
x:
:
The system isc co
om
mp
pl
le
et
te
el
ly
y ssw
wi
it
tc
ch
he
ed
d oof
ff
f
by selecting one of the
following positions by moving the selector lever:
• to positionsP P
, N N
, R R
or 1 1
.
o or
r
by switching the ignition off when the vehicle is stationary.
K
T Th
he
e ppr
ro
og
gr
ra
am
mm
me
ed
d ssp
pe
ee
ed
d mmu
us
st
t oon
nl
ly
y bbe
e rre
es
su
um
me
ed
d wwh
he
en
n iit
t iis
s nno
ot
t tto
oo
o hhi
ig
gh
h ffo
or
r
e ex
xi
is
st
ti
in
ng
g ttr
ra
af
ff
fi
ic
c cco
on
nd
di
it
ti
io
on
ns
s.
.
W
WA
AR
RN
NI
IN
NG
G
T Th
he
e ppr
ro
og
gr
ra
am
mm
me
ed
d ssp
pe
ee
ed
d mmu
us
st
t oon
nl
ly
y bbe
e rre
es
su
um
me
ed
d iif
f iit
t cco
om
mp
pl
li
ie
es
s wwi
it
th
h tth
he
e ssp
pe
ee
ed
d
r re
eg
gu
ul
la
at
ti
io
on
ns
s oof
f tth
ha
at
t mmo
om
me
en
nt
t.
.
W
WA
AR
RN
NI
IN
NG
G