2005 SAAB 9-3 Owners Manual

Page 97 of 292

SAAB 9-3 2005  Owners Manual 95 Instruments and controls
Explanation of the various selections under 
System Settings.
Language
Select the desired language. The num-
ber of languages can vary between 
markets.
Unit
Select the des

Page 98 of 292

SAAB 9-3 2005  Owners Manual 96 Instruments and controlsSwitchesThe parking lights and daytime running 
lights come on automatically when the igni-
tion switch is in the ON position.
High beam can not be activated in this posi-
t

Page 99 of 292

SAAB 9-3 2005  Owners Manual 97 Instruments and controls
High/low beamTo switch between high and low beam, pull 
the control stalk all the way towards the 
steering wheel. (Headlight switch must be 
ON.)
The   symbol on the main

Page 100 of 292

SAAB 9-3 2005  Owners Manual 98 Instruments and controlsFront fog lights (certain variants only)
The front fog lights should be used in poor 
visibility.
These are automatically turned off when the 
engine is switched off. When t

Page 101 of 292

SAAB 9-3 2005  Owners Manual 99 Instruments and controls
Hazard warning lightsThe button for the hazard warning lights is 
located on the climate control panel.
When the button is pressed, all the direction 
indicators and the sy

Page 102 of 292

SAAB 9-3 2005  Owners Manual 100 Instruments and controlsPriority of audible informationSound from various functions in the car, 
such as the direction indicators, parking 
assistance and seatbelt reminders, come 
from the same s

Page 103 of 292

SAAB 9-3 2005  Owners Manual 101 Instruments and controls
to prioritize the windshield. The following 
message is displayed on the SID:
To prevent the smell of washer fluid from 
entering the car, recirculation can be acti-
vated

Page 104 of 292

SAAB 9-3 2005  Owners Manual 102 Instruments and controlsIf the stalk switch is left in the AUTO position 
when the engine is switched off, when the 
engine is next started it must first be moved 
to the 0 or 3 position and then