2005 NISSAN X-TRAIL LIGHTING SYSTEM

ON BOARD DIAGNOSTIC (OBD) SYSTEM
EC-997
[YD (WITH EURO-OBD)]
C
D
E
F
G
H
I
J
K
L
MA
EC
TC BOOST SOL/CIRC P0045 0045××EC-1061
HIGH FUEL PRESS P0088 0088××EC-1066
FUEL PUMP P0089 0089××EC-1068
FUEL LEAK P0093 0093××EC-1071
MAF SENSOR P0101 0101××EC-1075
MAF SEN/CIRCUIT P0102 0102××EC-1083
MAF SEN/CIRCUIT P0103 0103××EC-1083
IAT SEN/CIRCUIT P0112 0112××EC-1088
IAT SEN/CIRCUIT P0113 0113××EC-1088
ECT SEN/CIRC P0117 0117××EC-1093
ECT SEN/CIRC P0118 0118××EC-1093
APP SEN 1/CIRCUIT P0122 0122 — —EC-1099
APP SEN 1/CIRCUIT P0123 0123 — —EC-1099
FUEL TEMP SEN/CIRC P0182 0182××EC-1106
FUEL TEMP SEN/CIRC P0183 0183××EC-1106
FRP SEN/CIRC P0192 0192××EC-1110
FRP SEN/CIRC P0193 0193××EC-1110
INJECTOR P0200 0200××EC-1116
CYL1 INJECTOR P0201 0201××EC-1118
CYL2 INJECTOR P0202 0202××EC-1118
CYL3 INJECTOR P0203 0203××EC-1118
CYL4 INJECTOR P0204 0204××EC-1118
ENG OVER TEMP P0217 0217 —×EC-1124
APP SEN 2/CIRCUIT P0222 0222 — —EC-1138
APP SEN 2/CIRCUIT P0223 0223 — —EC-1138
TC SYSTEM P0234 0234 — —EC-1145
TC BOOST SEN/CIRC P0237 0237××EC-1151
TC BOOST SEN/CIRC P0238 0238××EC-1151
CKP SEN/CIRCUIT P0335 0335××EC-1157
CKP SENSOR P0336 0336××EC-1163
CMP SEN/CIRCUIT P0340 0340××EC-1169
CMP SENSOR P0341 0341××EC-1175
GLOW RELAY P0380 0380××EC-1182
EGR SYSTEM P0401 0401××EC-1186
EGR VALVE P0404 0404××EC-1193
VEHICLE SPEED P0501 0501 — —EC-1200
VEHICLE SPEED P0502 0502 — —EC-1202
VEHICLE SPEED P0503 0503 — —EC-1204
BRAKE SW/CIRCUIT P0504 0504 — —EC-1206
BATTERY VOLTAGE P0563 0563 — —EC-1215
STRG SW/CIRC P0580 0580 — —EC-1218
STRG SW/CIRC P0581 0581 — —EC-1218
Items
(CONSULT-II screen item) DTC*
11st/2nd trip
DTCMI lighting
upReference page
CONSULT-II
GST*
2ECM*3

EC-998
[YD (WITH EURO-OBD)]
ON BOARD DIAGNOSTIC (OBD) SYSTEM

*1: 1st trip DTC No. and 2nd trip DTC No. are the same as DTC No.
*2: This number is prescribed by ISO 15031-6.
*3: In Diagnostic Test Mode II (Self diagnostic results), this number is controlled by NISSAN.
DTC AND 1ST/2ND TRIP DTC
The number of 1st/2nd trip DTC is the same as the number of DTC.
When a malfunction is detected during 1st trip, 1st trip DTC is stored in the ECM memory. MI does not illumi-
nate at this time. When the same malfunction is detected in the next trip (2nd trip), 2nd trip DTC is stored in the
ECM memory and 1st trip DTC is cleared from the ECM memory. MI does not illuminate at this time. In addi-
ECM P0605 0605××EC-1227
ECM P0606 0606××EC-1229
FUEL PUMP/CIRC P0628 0628××EC-1231
FUEL PUMP/CIRC P0629 0629××EC-1231
SENSOR PWR/CIRC1 P0642 0642××EC-1236
SENSOR PWR/CIRC1 P0643 0643××EC-1236
SENSOR PWR/CIRC2 P0652 0652××EC-1240
SENSOR PWR/CIRC2 P0653 0653××EC-1240
ECM RELAY P0686 0686 — —EC-1245
TCS C/U FUNCTN P1211 1211 — —EC-1249
TCS/CIRC P1212 1212 — —EC-1250
INJ ADJ RES/CIRC1 P1260 1260××EC-1251
INJ ADJ RES/CIRC1 P1261 1261××EC-1251
INJ ADJ RES/CIRC2 P1262 1262××EC-1251
INJ ADJ RES/CIRC2 P1263 1263××EC-1251
INJ ADJ RES/CIRC3 P1264 1264××EC-1251
INJ ADJ RES/CIRC3 P1265 1265××EC-1251
INJ ADJ RES/CIRC4 P1266 1266××EC-1251
INJ ADJ RES/CIRC4 P1267 1267××EC-1251
INJECTOR 1 P1268 1268 — —EC-1257
INJECTOR 2 P1269 1269 — —EC-1257
INJECTOR 3 P1270 1270 — —EC-1257
INJECTOR 4 P1271 1271 — —EC-1257
FRP RELIEF VALVE P1272 1272××EC-1263
FUEL PUMP P1273 1273××EC-1270
FUEL PUMP P1274 1274 —×EC-1275
FUEL PUMP P1275 1275 —×EC-1280
NATS MALFUNTION P1610 - P1617 1610 - 1617 — —EC-1001
APP SENSOR P2135 2135 — —EC-1285
INJ PWR/CIRC P2146 2146××EC-1292
INJECTOR/CIRC P2147 2147××EC-1297
INJECTOR/CIRC P2148 2148××EC-1297
INJ PWR/CIRC P2149 2149××EC-1292
BARO SEN/CIRC P2228 2228××EC-1303
BARO SEN/CIRC P2229 2229××EC-1303
Items
(CONSULT-II screen item) DTC*
11st/2nd trip
DTCMI lighting
upReference page
CONSULT-II
GST*
2ECM*3

ON BOARD DIAGNOSTIC (OBD) SYSTEM
EC-999
[YD (WITH EURO-OBD)]
C
D
E
F
G
H
I
J
K
L
MA
EC

tion, DTC is stored in the ECM memory and MI lights up when the same malfunction is detected during the fol-
lowing consecutive trip (3rd trip).
The procedure for erasing DTC, 1st trip DTC, and 2nd trip DTC from the ECM memory is described in EC-999,
"HOW TO ERASE EMISSION-RELATED DIAGNOSTIC INFORMATION" .
For malfunctions in which 1st/2nd trip DTC are displayed, Refer to EC-996, "
Emission-related Diagnostic Infor-
mation" .
1st/2nd trip DTC is specified in Service $07 of ISO15031-5. 1st/2nd trip DTC detection occurs without lighting
up MI and therefore does not warn the driver of a malfunction.
When 1st/2nd trip DTC is detected, check, print out or write down, and erase 1st/2nd trip DTC as specified
with step II of Work Flow, refer to EC-1008, "
WORK FLOW" . Then perform DTC Confirmation Procedure or
Overall Function Check to try to duplicate the malfunction. If the malfunction is duplicated, it is necessary to
investigate the cause again.
How to Read DTC and 1st/2nd Trip DTC
DTC and 1st/2nd trip DTC can be read by the following procedures.
With CONSULT-II
With GST
CONSULT-II or GST (Generic Scan Tool): Examples: P0117, P0335, P1260, etc.
These numbers are prescribed by ISO 15031-6.
(CONSULT-II also displays the malfunctioning parts and systems.)
A sample of CONSULT-II display for DTC and 1st/2nd trip DTC is
shown in the figure. DTC and 1st/2nd trip DTC are displayed in the
“SELF-DIAG RESULTS” mode of CONSULT-II.
“TIME” data shows how many times the vehicle was driven after the
last detection of DTC or 1st/2nd trip DTC. When DTC or 1st/2nd trip
DTC has been detected currently, “TIME” becomes “0”.

CONSULT-II displays for DTC and 1st/2nd trip DTC become the
same.

The output of a DTC indicates a malfunction. However, GST
does not indicate whether the malfunction is still occurring or
has occurred in the past and has returned to normal. CONSULT-
II can identify the malfunction status. Therefore the use of CON-
SULT-II (If available) is recommended.
FREEZE FRAME DATA
ECM records driving conditions such as calculated load value, engine coolant temperature, engine speed,
vehicle speed, and intake manifold pressure at the moment a malfunction is detected.
The data stored together with DTC is called Freeze Frame Data, and is displayed on CONSULT-II or GST.
When 1st/2nd trip DTC is detected, Freeze Frame Data is not recorded.
Only a set of Freeze Frame Data can be stored in the ECM memory. When ECM records Freeze Frame Data,
and another Freeze Frame Data is generated after that, the first (original) Freeze Frame Data is not updated in
ECM and it remains.
When the DTC is erased from ECM memory, Freeze Frame Data is erased with DTC. The procedure for eras-
ing DTC is described in EC-999, "
How to Erase DTC" .
HOW TO ERASE EMISSION-RELATED DIAGNOSTIC INFORMATION
How to Erase DTC
With CONSULT-II
The emission related diagnostic information in the ECM can be erased by selecting “ERASE” in the “SELF-
DIAG RESULTS” mode with CONSULT-II.
1. If the ignition switch stays ON after repair work, be sure to turn ignition switch OFF once. Wait at least 5
seconds and then turn it ON (engine stopped) again.
2. Touch “ENGINE”.
3. Touch “SELF-DIAG RESULTS”.
PBIB2022E

EC-1012
[YD (WITH EURO-OBD)]
TROUBLE DIAGNOSIS

Basic InspectionEBS0117A
Precaution:
Perform Basic Inspection without electrical or mechanical loads applied;

Headlamp switch is OFF.

On vehicles equipped with daytime light systems, set lighting switch to the 1st position to light
only small lamps.

Air conditioner switch is OFF.

Rear defogger switch is OFF.

Steering wheel is in the straight-ahead position, etc.
1. INSPECTION START
1. Check service records for any recent repairs that may indicate a related malfunction.
2. Check the current need for scheduled maintenance, especially for fuel filter and air cleaner filter. Refer to
MA-7, "
PERIODIC MAINTENANCE" .
3. Open engine hood and check the following:
–Harness connectors for improper connections
–Vacuum hoses for splits, kinks, or improper connections
–Wiring for improper connections, pinches, or cuts
4. Start engine and warm it up to the normal operating tempera-
ture.
>> GO TO 2.
2. PREPARATION FOR CHECKING IDLE SPEED
With CONSULT-II
Connect CONSULT-II to the data link connector.
Without CONSULT-II
Install diesel tacho tester to the vehicle.
>> GO TO 3.
SEF142I

INDEX FOR DTC
EC-1351
[YD (WITHOUT EURO-OBD)]
C
D
E
F
G
H
I
J
K
L
MA
EC

[YD (WITHOUT EURO-OBD)]INDEX FOR DTCPFP:00024
Alphabetical IndexEBS011WP
Check if the vehicle is a model with Euro-OBD (E-OBD) system or not by the “Type approval number” on the
identification plate. Refer to GI-46, "
IDENTIFICATION PLATE" .
NOTE:
If DTC U1000 is displayed with other DTC, first perform the trouble diagnosis for DTC U1000. Refer to
EC-1425, "
DTC U1000 CAN COMMUNICATION LINE" .
X: Applicable —: Not applicable
Items
(CONSULT-II screen terms) DTC
MI lighting
up Reference page
CONSULT-II
ECM*
1
APP SEN 1/CIRCUIT P0122 0122 —EC-1455
APP SEN 1/CIRCUIT P0123 0123 —EC-1455
APP SEN 2/CIRCUIT P0222 0222 —EC-1493
APP SEN 2/CIRCUIT P0223 0223 —EC-1493
APP SENSOR P2135 2135 —EC-1624
BARO SEN/CIRC P2228 2228 —EC-1641
BARO SEN/CIRC P2229 2229 —EC-1641
BATTERY VOLTAGE P0563 0563 —EC-1554
BRAKE SW/CIRCUIT P0504 0504 —EC-1544
CAN COMM CIRCUIT U1000
1000*2—EC-1425
CKP SEN/CIRCUIT P0335 0335×EC-1512
CKP SENSOR P0336 0336×EC-1518
CMP SEN/CIRCUIT P0340 0340×EC-1525
CMP SENSOR P0341 0341×EC-1531
CMP/CKP RELATION P0016 0016 —EC-1428
CYL1 INJECTOR P0201 0201 —EC-1474
CYL2 INJECTOR P0202 0202 —EC-1474
CYL3 INJECTOR P0203 0203 —EC-1474
CYL4 INJECTOR P0204 0204 —EC-1474
ECM P0605 0605×EC-1566
ECM P0606 0606×EC-1568
ECM RELAY P0686 0686 —EC-1584
ECT SEN/CIRC P0117 0117 —EC-1449
ECT SEN/CIRC P0118 0118 —EC-1449
ENG OVER TEMP P0217 0217×EC-1480
FRP RELIEF VALVE P1272 1272 —EC-1602
FRP SEN/CIRC P0192 0192 —EC-1466
FRP SEN/CIRC P0193 0193 —EC-1466
FUEL LEAK P0093 0093×EC-1434
FUEL PUMP P0089 0089 —EC-1432
FUEL PUMP P1273 1273 —EC-1609
FUEL PUMP P1274 1274×EC-1614
FUEL PUMP P1275 1275×EC-1619
FUEL PUMP/CIRC P0628 0628×EC-1570
FUEL PUMP/CIRC P0629 0629×EC-1570
FUEL TEMP SEN/CIRC P0182 0182 —EC-1462

EC-1352
[YD (WITHOUT EURO-OBD)]
INDEX FOR DTC

*1: In Diagnostic Test Mode II (Self-diagnostic results).
*2: The troubleshooting for this DTC needs CONSULT-II.FUEL TEMP SEN/CIRC P0183 0183 —EC-1462
HIGH FUEL PRESS P0088 0088×EC-1430
IAT SEN/CIRCUIT P0112 0112 —EC-1443
IAT SEN/CIRCUIT P0113 0113 —EC-1443
INJ ADJ RES/CIRC1 P1260 1260 —EC-1590
INJ ADJ RES/CIRC1 P1261 1261 —EC-1590
INJ ADJ RES/CIRC2 P1262 1262 —EC-1590
INJ ADJ RES/CIRC2 P1263 1263 —EC-1590
INJ ADJ RES/CIRC3 P1264 1264 —EC-1590
INJ ADJ RES/CIRC3 P1265 1265 —EC-1590
INJ ADJ RES/CIRC4 P1266 1266 —EC-1590
INJ ADJ RES/CIRC4 P1267 1267 —EC-1590
INJ PWR/CIRC P2146 2146×EC-1631
INJ PWR/CIRC P2149 2149×EC-1631
INJECTOR P0200 0200×EC-1472
INJECTOR/CIRC P2147 2147×EC-1635
INJECTOR/CIRC P2148 2148×EC-1635
INJECTOR 1 P1268 1268 —EC-1596
INJECTOR 2 P1269 1269 —EC-1596
INJECTOR 3 P1270 1270 —EC-1596
INJECTOR 4 P1271 1271 —EC-1596
MAF SEN/CIRCUIT P0102 0102 —EC-1438
MAF SEN/CIRCUIT P0103 0103 —EC-1438
NATS MALFUNCTION P1610 - P1617 1610 - 1617 —EC-1373
NO DTC IS DETECTED.
FURTHER TESTING
MAY BE REQUIRED.P00000000 — —
SENSOR PWR/CIRC1 P0642 0642 —EC-1575
SENSOR PWR/CIRC1 P0643 0643 —EC-1575
SENSOR PWR/CIRC2 P0652 0652 —EC-1579
SENSOR PWR/CIRC2 P0653 0653 —EC-1579
STRG SW/CIRC P0580 0580 —EC-1557
STRG SW/CIRC P0581 0581 —EC-1557
TC BOOST SEN/CIRC P0237 0237 —EC-1506
TC BOOST SEN/CIRC P0238 0238 —EC-1506
TC SYSTEM P0234 0234 —EC-1500
TCS/CIRC P1212 1212×EC-1589
TCS C/U FUNCTN P1211 1211×EC-1588
VEHICLE SPEED P0501 0501 —EC-1538
VEHICLE SPEED P0502 0502 —EC-1540
VEHICLE SPEED P0503 0503 —EC-1542
Items
(CONSULT-II screen terms) DTC
MI lighting
up Reference page
CONSULT-II
ECM*
1

INDEX FOR DTC
EC-1353
[YD (WITHOUT EURO-OBD)]
C
D
E
F
G
H
I
J
K
L
MA
EC

DTC No. IndexEBS011WQ
Check if the vehicle is a model with Euro-OBD (E-OBD) system or not by the “Type approval number” on the
identification plate. Refer to GI-46, "
IDENTIFICATION PLATE" .
NOTE:
If DTC U1000 is displayed with other DTC, first perform the trouble diagnosis for DTC U1000. Refer to
EC-1425, "
DTC U1000 CAN COMMUNICATION LINE" .
X: Applicable —: Not applicable
DTC
Items
(CONSULT-II screen item) MI lighting up Reference page
CONSULT-II
ECM*
1
U1000
1000*2CAN COMM CIRCUIT —EC-1425
P00000000NO DTC IS DETECTED.
FURTHER TESTING
MAY BE REQUIRED.——
P0016 0016 CMP/CKP RELATION —EC-1428
P0088 0088 HIGH FUEL PRESS×EC-1430
P0089 0089 FUEL PUMP —EC-1432
P0093 0093 FUEL LEAK×EC-1434
P0102 0102 MAF SEN/CIRCUIT —EC-1438
P0103 0103 MAF SEN/CIRCUIT —EC-1438
P0112 0112 IAT SEN/CIRCUIT —EC-1443
P0113 0113 IAT SEN/CIRCUIT —EC-1443
P0117 0117 ECT SEN/CIRC —EC-1449
P0118 0118 ECT SEN/CIRC —EC-1449
P0122 0122 APP SEN 1/CIRCUIT —EC-1455
P0123 0123 APP SEN 1/CIRCUIT —EC-1455
P0182 0182 FUEL TEMP SEN/CIRC —EC-1462
P0183 0183 FUEL TEMP SEN/CIRC —EC-1462
P0192 0192 FRP SEN/CIRC —EC-1466
P0193 0193 FRP SEN/CIRC —EC-1466
P0200 0200 INJECTOR×EC-1472
P0201 0201 CYL1 INJECTOR —EC-1474
P0202 0202 CYL2 INJECTOR —EC-1474
P0203 0203 CYL3 INJECTOR —EC-1474
P0204 0204 CYL4 INJECTOR —EC-1474
P0217 0217 ENG OVER TEMP×EC-1480
P0222 0222 APP SEN 2/CIRCUIT —EC-1493
P0223 0223 APP SEN 2/CIRCUIT —EC-1493
P0234 0234 TC SYSTEM —EC-1500
P0237 0237 TC BOOST SEN/CIRC —EC-1506
P0238 0238 TC BOOST SEN/CIRC —EC-1506
P0335 0335 CKP SEN/CIRCUIT×EC-1512
P0336 0336 CKP SENSOR×EC-1518
P0340 0340 CMP SEN/CIRCUIT×EC-1525
P0341 0341 CMP SENSOR×EC-1531
P0501 0501 VEHICLE SPEED —EC-1538
P0502 0502 VEHICLE SPEED —EC-1540
P0503 0503 VEHICLE SPEED —EC-1542

EC-1382
[YD (WITHOUT EURO-OBD)]
TROUBLE DIAGNOSIS

Basic InspectionEBS011XF
Precaution:
Perform Basic Inspection without electrical or mechanical loads applied;

Headlamp switch is OFF.

On vehicles equipped with daytime light systems, set lighting switch to the 1st position to light
only small lamps.

Air conditioner switch is OFF.

Rear defogger switch is OFF.

Steering wheel is in the straight-ahead position, etc.
Priority Detected items (DTC)
1

U1000 CAN communication line

P0016 Crankshaft position - camshaft position correlation

P0102 P0103 Mass air flow sensor

P0112 P0113 Intake air temperature sensor

P0117 P0118 Engine coolant temperature sensor

P0122 P0123 P0222 P0223 P2135 Accelerator pedal position sensor

P0182 P0183 Fuel pump temperature sensor

P0192 P0193 Fuel rail pressure sensor

P0237 P0238 Turbocharger boost sensor

P0335 P0336 Crankshaft position sensor

P0340 P0341 Camshaft position sensor

P0563 Battery voltage

P0605 P0606 ECM

P0642 P0643 P0652 P0653 Sensor power supply

P1260 - P1267 Fuel injector adjustment resistor

P1610 - P1617 NATS

P2228 P2229 Barometric pressure sensor
2

P0089 P0628 P0629 P1272 - P1275 Fuel pump

P0200 - P0204 P1268 - P1271 P2146 - P2149 Fuel injector

P0686 ECM relay

P1212 TCS communication line
3

P0088 P0093 Fuel system

P0217 Engine over temperature (OVERHEAT)

P0234 Turbocharger system

P0501 P0502 P0503 ASCD vehicle speed sensor

P0504 ASCD brake switch

P0580 P0581 ASCD steering switch

P1211 TCS control unit