Function and System Application
Diagnostic testmode Function ENGINE A/T ABS AIR BAG
Work support This mode enables a technician to
adjust some devices faster and more
accurate by following the indications
on CONSULT-II. xxÐÐ
Self-diagnostic
results Self-diagnostic results can be read
and erased quickly.
xxxx
Trouble diagnos-
tic record Current self-diagnostic results and all
trouble diagnostic records previously
stored can be read.
ÐÐÐ x
ECU discrimi-
nated No. Classification number of a replace-
ment ECU can be read to prevent an
incorrect ECU from being installed.
ÐÐÐ x
Data monitor Input/Output data in the ECU can be
read. xxxÐ
DTC work sup-
port The operating condition to confirm
Diagnosis Trouble Codes can be
selected.
ÐxÐÐ
Active test Diagnostic Test Mode in which CON-
SULT-II drives some actuators apart
from the ECUs and also shifts some
parameters in a specified range. xÐxÐ
ECU (ECM/TCM)
part number ECU (ECM/TCM) part number can
be read.
xxxÐ
Function test This mode can show results of self-
diagnosis of ECU with either ªOKº or
ªNGº. For engine, more practical
tests regarding sensors/switches
and/or actuators are available. xxxx
x: Applicable
Nickel Metal Hydride Battery Replacement
CONSULT-II contains a nickel metal hydride battery. When replacing the battery obey the following:
WARNING:
Replace the nickel metal hydride battery with Genuine CONSULT-II battery only. Use of another bat-
tery may present a risk of fire or explosion. The battery may present a fire or chemical burn hazard if
mistreated. Do not recharge, disassemble of dispose of in fire.
Keep the battery out of reach of children and discard used battery conforming to the local regulations.
CONSULT-II CHECKING SYSTEM
GI-3
MA
EM
LC
EC
FE
CL
MT
AT
TF
PD
FA
RA
BR
ST
RS
BT
HA
EL
IDX
