2005 NISSAN ALTIMA 3,5 SE tire pressure

WARNING
cImproperly inflated tires can fail sud-
denly and cause an accident.
cThe vehicle weight capacity is indicated
on the Tire and Loading Information
label. Do not load your vehicle beyond
this capacity. Overloading your vehicle
may result in reduced tire life, unsafe
operating conditions due to premature
tire failure, or unfavorable handling
characteristics and could also lead to a
serious accident. Loading beyond the
specified capacity may also result in
failure of other vehicle components.
cBefore taking a long trip, or whenever
you heavily load your vehicle, use a tire
pressure gauge to ensure that the tire
pressures are at the specified level.cIncrease the cold tire inflation pressure
as indicated in(Checking tire pressure(
later in this section when using the tires
specified by NISSAN above 100 MPH
(162 km/h) where it is legal to do so (on
a race track for example) . Failure to
increase the cold tire inflation pressure
may result in tire failure, loss of control
and possible injury. After such use, re-
adjust tire pressure.
cDo not drive your vehicle over 85 MPH
(137 km/h) unless it is equipped with
high speed rated tires. Driving faster
than 85 MPH (137 km/h) may result in
tire failure, loss of control and possible
injury.
cFor additional information regarding
tires, refer to “Important Tire Safety In-
formation” (US) or “Tire Safety Informa-
tion” (Canada) in the Warranty Informa-
tion Booklet.
8-40Maintenance and do-it-yourself
ZREVIEW COPYÐ2005 Altima(l30)
Owners ManualÐUSA_English(nna)
01/04/05Ðarosenma
X

Size Cold Tire
Inflation
PressureHigh
Speed/
Maximum
Load Cold
Tire Infla-
tion Pres-
sure
Front
Original TireP215/60/R16
94T200 kPa,
29 PSI240 kPa,
35 PSI
P215/55R17
93H
P215/55R17
93V230 kPa,
33 PSI240 kPa,
35 PSI
P225/45R18
91Y240 kPa,
35 PSI260 kPa,
38 PSI
Size Cold Tire
Inflation
PressureHigh
Speed/
Maximum
Load Cold
Tire Infla-
tion Pres-
sure
Rear
Original TireP215/60R16
94T200 kPa,
29 PSI240 kPa,
35 PSI
P215/55R17
93H
P215/55R17
93V210 kPa,
30 PSI240 kPa,
35 PSI
P225/45R18
91Y240 kPa,
35 PSI260 kPa,
38 PSI
Spare Tire T135/70R16
T135/90R16
T155/80R17420 kPa,
60 PSIN/A
TIRE LABELING
Federal law requires tire manufacturers to place
standardized information on the sidewall of all
tires. This information identifies and describes
the fundamental characteristics of the tire and
also provides the tire identification number (TIN)
for safety standard certification. The TIN can be
used to identify the tire in case of a recall.

WARNING
cAfter rotating the tires, check and ad-
just the tire pressure.
cRetighten the wheel nuts when the ve-
hicle has been driven for 600 miles
(1,000 km) (also in cases of a flat tire,
etc.) .
cDo not include the spare tire in the tire
rotation.
cFor additional information regarding
tires, refer to “Important Tire Safety In-
formation” (US) or “Tire Safety Informa-
tion” (Canada) in the Warranty Informa-
tion Booklet.