Page 9 of 12

Additional Features
Memory Feature(If equipped) This feature will allow you to set two positions for
the driver's seat, power mirrors, and adjustable pedals (if equipped). Set the positionby pressing the SET button (indicator will illuminate) then press the 1 or 2 button to
set the position to either Driver 1 or Driver 2. This memory setting can then berecalled when you press the 1 or 2 button, enter Customer Code 1 or 2 on the keypad,
or when you press unlock on the remote entry system (one of your remotetransmitters is associated with Driver 1 and the other transmitter is associated with Driver 2)
.
HomeLink (if equipped) The HomeLink Wireless Control System on the driver’s visor provides a
convenient way to replace up to three handheld transmitters with a single device. This feature will
operate most garage doors, entry gate operators, security systems, and home or office lighting.
For programming, please consult your Owner’s Guide.
Power MirrorsTo adjust your mirrors, rotate the control clockwise to adjust the
right mirror and counterclockwise to adjust the left mirror. Move the control in the
direction you wish to tilt the mirror. Then rotate the control to the center position to
lock the mirrors in place.
Keyless Entry PadThe keyless entry keypad can be used to lock or unlock the
doors without using a key. It can also control the memory seat, power mirrors, and
adjustable pedals features (if equipped). For more information, please consult yourOwner’s Guide.
AutolockYour vehicle is equipped with an autolock feature. The autolock feature will automatically
lock all doors when your vehicle is in motion and meets a set of conditions, as described in your
Owner’s Guide. Your vehicle comes with this feature enabled. You can enable or disable this featureby following the activation or deactivation procedure outlined in your Owner’s Guide.
Adjustable Pedals(if equipped): The accelerator and brake pedal should only be adjusted when
the vehicle is stopped and the gearshift is in the P (Park) position. Press the top of the control to adjustthe pedals away from you or press the bottom of the control to adjust the pedals toward you.
Reverse Sensing System(if equipped) The Reverse Sensing System (RSS) sounds a tone to warn
the driver of obstacles near the rear bumper when R (Reverse) is selected and the vehicle is moving atspeeds less than 3 mph (5 km/h). The system is not effective at speeds above 3 mph (5 km/h) andmay not detect certain angular or moving objects.
Page 10 of 12

one|Tune/Disc SelectorPress to go up or down
the radio frequency or to select a desired disc.Also use in menu mode to select various settings.
two|LoadPress to begin the CD load
sequence. Press and hold to autoload up to6 CDs.
three|CDPress to enter CD mode. If a CD is
already loaded into the system, the CD willbegin playing where it last ended.
four|On/Off/Volume Control Push to turn
the system ON or OFF. Turn to increase ordecrease volume. If the volume is set above acertain level and the ignition is turned off, the
volume will come back on at a “nominal” levelwhen the ignition switch is turned back on.
five|AM / FMPress to select AM or FM
frequency bands.
six|Seek Function Press to access the
next/previous strong station or track.
seven|Scan FunctionPress for a brief
sampling of radio stations or CD tracks. Pressagain to stop.
eight|CD RewindPress to manually reverse in
a CD track.
nine|CD Fast Forward Press to manually
advance in a CD track.
ten|Setting Memory Preset To set a station:
Press AM/FM to select frequency band; tune toa station, then press and hold a preset buttonuntil the sound returns.
Bass / TreblePress MENU until bass or treble
settings are displayed, adjust using theSEEK control.
Balance / Fade Press MENU until Balance is
displayed, press to adjust the audio betweenthe left and right speakers using the SEEK
control. Press MENU again to display Fade,
press SEEK to adjust audio between the frontand rear speakers.
Setting The Clock Press MENU until SELECT
HOUR or SELECT MINS is displayed. Press the
up/down arrows or SEEK control to adjust the
hours/minutes. Press MENU again todisengage clock mode.
MP3 Track/Folder Mode In Track mode, pressing
SEEK will scroll through all tracks on the disc.
In Folder mode, pressing SEEK will scroll only
through tracks within a selected folder.
4
3
5
6
6
8
10
21
7
9
Premium / Audiophile In Dash 6 CD Sound System (if equipped)
Page 11 of 12

Driver and Passenger Side Temperature
Set desired cabin temperature with the 1or 4red and blue buttons. Press 1 for driver’s
side, 4for passenger’s side. Recommended
setting is 72°F (22°C) to 75°F (24°C).
Dual Control (if equipped)
Press 10DUAL to engage/disengage separate
passenger side temperature control. For controlswithout a 10DUAL button, press and hold 2
AUTO to engage/disengage separatepassenger
side temperature control.
Automatic Operation
Set desired 1cabin temperature. Press 2AUTO
button for full automatic operation. The systemwill automatically adjust airflow temperature,fan speed, airflow direction, A/C, andrecirculated air based on the selectedtemperature to heat or cool the vehicle to thedesired temperature as soon as possible.
Max A/C Operation
Automatic operation: Press 2AUTO button for
full automatic operation. Do not override A/C or
recirculated air. Set the desired temperature.Override Operation: Select 7air distribution.
Select 8A/C and 9 recirculated air. Use
recirculated air with A/C to provide colder
airflow. Set temperature setting to 60°F
(15.5°C). Initially set to highest fan speed 5,
then adjust to maintain comfort.Manual Override Operation:Press 1to set
desired cabin temperature. Adjust any of thefollowing for personal comfort preferences: 5
fan speed, 7 airflow direction, 8 A/C, and
9 recirculated air. Fan speed, A/C, and
recirculated air overrides will not turn off the
AUTO indicator light. Airflow direction overrides
will turn off the AUTO indicator light.
One Button Airflow Direction Control (if equipped)Press 7repeatedly to select airflow direction.
Defogging / Demisting
Press 3to distribute outside air through the
windshield defroster vents and demister vents.
To reduce humidity buildup in the vehicle,do not drive with the Climate Control turned off. Also, do not drive with recirculated air selectedunless A/C is operating.
Heated Seats (if equipped)
Press 6to cycle through available settings of
high heat (2 lights), low heat (1 light), and off(no lights). 1
2
4
57910
3
686
Climate Control
Page 12 of 12
2005 Mercury |Montego
Quick Reference Guide