Page 12 of 417

Contents
Flat tire .............................................. 349
Preparing the vehicle ................... 349
Sealing tires with TIREFIT kit ........ 349
Batteries ............................................ 354
Charging the batteries ................. 355
Towing the vehicle ............................. 357
Installing/reinstalling towing
eye bolt ........................................ 359
Points to bear in mind .................. 360
Transporting the vehicle............... 360
Fuses ................................................. 361
Technical data.................................. 362
Spare parts service............................. 364
Warranty coverage ............................. 365
Loss of Service and Warranty
Information Booklet ...................... 365
Identification labels ............................ 366
Engine number.............................. 366
Layout of poly-V-belt drive .................. 367
Engine ................................................ 368
Rims and tires .................................... 369
Mixed size tires ............................. 370
Winter tires* ................................. 371
Electrical system ................................ 372
Main dimensions ................................ 373
Weights .............................................. 374Fuels, coolants, lubricants, etc. .......... 375
Capacities ..................................... 375
Engine oils .................................... 377
Engine oil additives ....................... 377
Air conditioner refrigerant ............ 377
Brake fluid .................................... 378
Premium unleaded gasoline.......... 378
Fuel requirements......................... 378
Gasoline additives......................... 379
Coolants ....................................... 380
Windshield and headlamp
washer system.............................. 382
Technical terms............................... 384Index................................................. 390
Page 247 of 417

246 OperationEngine compartmentClosing
Pull the hood upwards in the center,
against the resistance of the gas-filled
spring struts.
Hold the front center part of the hood
with both hands and push it back-
wards. After pushing the hood back-
wards about half-way, you will feel the
hood passing a crest and the resulting
force pulling the hood away from you.
At that point, let go of the hood and let
it fall onto the latches.
The hood should now be locked and en-
tirely closed.
Check that the hood is properly closed.
If the hood is not properly engaged, re-
peat the closing procedure.
Engine oil
The amount of oil your engine needs will
depend on a number of factors, including
driving style. Higher oil consumption can
occur when
the vehicle is new
the vehicle is driven frequently at
higher engine speeds
Engine oil consumption checks should only
be made after the vehicle break-in period.
Regularly check the engine oil level, at
least every 1 800 miles (3 000 km).
Warning!
G
Be careful that you do not close the hood on
anyone.
!Make sure the rollers at the rear of the
hood are engaged and the guide pins
line up with the guide holes. Otherwise
the hood may be damaged.
!Do not use any special lubricant addi-
tives, as these may damage the drive
assemblies. Using special additives not
approved by Mercedes-Benz may
cause damage not covered by the
Mercedes-Benz Limited Warranty.
Page 378 of 417

377 Technical data
Fuels, coolants, lubricants, etc.
Engine oils
Engine oils are specifically tested for their
suitability in our engines and durability for
our service intervals. Therefore, only use
approved engine oils and oil filters
required for vehicles with Maintenance
System. For a listing of approved engine
oils and oil filters, refer to the Factory
Approved Service Products pamphlet, or
contact an authorized Mercedes-Benz
Center.
Using engine oils and oil filters of
specification other than those expressly
required for the Maintenance System, or
changing of oil and oil filter at change
intervals longer than those called for by
the Maintenance System will result in en-
gine damage not covered by the
Mercedes-Benz Limited Warranty.Please follow Maintenance System recom-
mendations for scheduled oil changes.
Failure to do so will result in engine dam-
age not covered by the Mercedes-Benz
Limited Warranty.
Engine oil additives
Do not blend oil additives with engine oil.
They may damage the engine.
Damage or malfunctions resulting from
blending oil additives are not covered by
the Mercedes-Benz Limited Warranty.Air conditioner refrigerant
R-134a (HFC) refrigerant and special PAG
lubricating oil are used in the air condition-
er system.
Never use R-12 (CFC) or mineral-based lu-
bricating oil. Otherwise damage to the
system will occur.
Page 380 of 417

379 Technical data
Fuels, coolants, lubricants, etc.
Using mixtures of ethanol and methanol is
not allowed. Gasohol, which contains
10% ethanol and 90% unleaded gasoline,
can be used.
These blends must also meet all other fuel
requirements, such as resistance to spark
knock, boiling range, vapor pressure, etc.
Gasoline additives
A major concern among engine
manufacturers is carbon build-up caused
by gasoline. Mercedes-Benz recommends
only the use of quality gasoline containing
additives that prevent the build up of
carbon deposits.
After an extended period of using fuels
without such additives, carbon deposits
can build up especially on the intake valves
and in the combustion area, leading to
engine performance problems such as:
Warm-up hesitation
Unstable idle
Knocking/pinging
Misfire
Power lossIn areas where carbon deposits may be
encountered due to lack of availability of
gasolines which contain these additives,
Mercedes-Benz recommends the use of
additives approved by us for use on
Mercedes-Benz vehicles. Refer to Factory
Approved Service Products pamphlet for a
listing of approved product(s). Follow
directions on product label.
Do not blend any specific fuel additives
with fuel. This only results in unnecessary
cost and may be harmful to engine
operation.
Damage or malfunction resulting from
poor fuel quality or from blending
additional fuel additives other than those
tested and approved by us for use on
Mercedes-Benz vehicles listed in the
Factory Approved Service Products
pamphlet are not covered by the
Mercedes-Benz Limited Warranty.
Page 398 of 417

397 Index
E
Electric air pump 340
Electrical consumer battery 250
Electrical outlet see 12-V socket 203
Electronic Stability Program see ESP
Emergency
Opening the driver’s door 343
Opening the trunk 342
Unlocking the vehicle 342
Emergency call
911 164
Emergency call system
Initiating emergency call 210
Requirements 208
Emergency operation (Limp Home
Mode) 177
Emergency operations
Releasing trunk lid from inside 102
Emergency Tensioning Device (ETD) 72,
386
Emission control 238
Emission control information label 366Engine
Compartment 243
Power output 368
Starting 48
Technical data 368
Turning off 58
Engine malfunction indicator lamp 29
Engine number 366, 386
Engine oil 246, 377
Adding 248
Additives 377
Checking 247
Checking level 241
Consumption 246
Filler neck 247
Message in the multifunction
display 330
Viscosity 386
Engine oil temperature 29
Oil temperature symbol 301
Engine start button 31Entry/exit lights 111
ESP 79, 81, 386
Control switch 32
Messages in the multifunction
display 307
Resetting 307
Switching off 83
Switching on 84
Warning lamp 81
ETD see Emergency Tensioning Device
Express-open windows 194
Exterior lamp switch 27, 51, 105
Exterior lamps
Delayed shut-off 132
Exterior lighting
Additional turn signals 347
Exterior rear view mirrors
Adjusting 32, 43