2005 MERCEDES-BENZ SLR CLASS display

304 Practical hintsWhat to do if ...Vehicle status messages in the multifunction display
Warning and malfunction messages
appear in the multifunction display located
in the instrument cluster.
Certain warning and malfunction messag-
es are accompanied by an audible signal.
Address these messages accordingly and
follow the additional instructions given in
this Operator’s Manual.
Selecting the vehicle status message
memory menu in the control system
(page 124) displays both cleared and
uncleared messages.
High-priority messages appear in the
multifunction display in red color.
Certain messages of high priority cannot
be cleared from the multifunction display
using the reset button (
page 29). Other messages of high priority and
messages of less immediate priority can
be cleared from the multifunction display
using the reset button. They are then
stored in the vehicle status message mem-
ory (
page 124). Remember that clearing
a message will only make the message dis-
appear. Clearing a message will not cor-
rect the condition that caused the
message to appear.
Warning!
G
All categories of messages contain
important information which should be
taken note of and, where a malfunction is
indicated, addressed as soon as possible at
an authorized Mercedes-Benz Center.
Failure to repair condition noted may cause
damage not covered by the Mercedes-Benz
Limited Warranty, or result in property
damage or personal injury.
Warning!
G
No messages will be displayed if either the
instrument cluster or the multifunction
display is inoperative.
Contact your nearest authorized
Mercedes-Benz Center.iSwitching on the ignition causes all in-
strument cluster lamps (except high
beam headlamp indicator lamp and
turn signal indicator lamps unless acti-
vated) as well as the multifunction dis-
play to come on. Make sure the lamps
and multifunction display are in work-
ing order before starting your journey.

305 Practical hints
What to do if ...
On the pages that follow, you will find a
compilation of the most important warning
and malfunction messages that may
appear in the multifunction display. High
priority messages appear in red color.
For your convenience the messages are di-
vided into two sections:

Text messages (
page 306)


Symbol messages (
page 309)

306 Practical hintsWhat to do if ...Text messagesLeft display
Right display
Possible cause
Possible solution
ABS
malfunction!
Visit
workshop!
The ABS has detected a mal-
function and has switched off.
The ESP and the BAS are also
deactivated.
The SBC brake system is still
functioning normally but with-
out the ABS available.

Continue driving with added caution.
Wheels may lock during hard braking, reducing steering
capability.

Have the system checked at an authorized
Mercedes-Benz Center immediately.
Failure to follow these instructions increases the risk of an
accident.
Display malfunc-
tion
Visit
workshop!
The ABS or the ABS display is
malfunctioning.

Continue driving with added caution.
Wheels may lock during hard braking, reducing steering
capability.

Have the system checked at an authorized
Mercedes-Benz Center immediately.
Failure to follow these instructions increases the risk of an
accident.

307 Practical hints
What to do if ...
Left display
Right display
Possible cause
Possible solution
ESP
malfunction!
Visit
workshop!
The ESP has detected a mal-
function and switched off. The
SBC brake system is still func-
tioning normally. The ABS may
still be operational.

Continue driving with added caution.

Have the system checked at an authorized
Mercedes-Benz Center immediately.
Failure to follow these instructions increases the risk of an
accident.
Unavailable!
See Oper.'s Man.
The ESP is deactivated because
the power supply has been in-
terrupted. The SBC brake sys-
tem is still functioning
normally.

Synchronize the ESP. With the vehicle stationary, turn
the steering wheel completely to the left and then to the
right.
Ensure that you can turn the steering wheel to the stop
without the wheels touching an object (e.g. the road
curb).
If the ESP message does not go out:

Continue driving with added caution.

Have the system checked at an authorized
Mercedes-Benz Center immediately.
Failure to follow these instructions increases the risk of an
accident.

308 Practical hintsWhat to do if ...Left display
Right display
Possible cause
Possible solution
ESP
Display malfunc-
tion
Visit
workshop!
The ESP or the ESP display is
malfunctioning.

Continue driving with added caution.

Have the system checked at an authorized
Mercedes-Benz Center immediately.
Failure to follow these instructions increases the risk of an
accident.
SLR
ACL system
malfunction
Visit
workshop!


The locking system is
malfunctioning.


The transmission cooling
system is malfunctioning.

Have the system checked at an authorized
Mercedes-Benz Center immediately.

309 Practical hints
What to do if ...
Symbol messagesLeft display
Right display
Possible cause
Possible solution
G
Display malfunc-
tion
Visit
workshop!
The displays for several sys-
tems have malfunctioned.
Some systems themselves may
also have malfunctioned.

Continue driving with added caution.
When the display is malfunctioning, warnings and mal-
function messages might not be displayed.

Have the electronic systems checked by an authorized
Mercedes-Benz Center immediately.
Failure to follow these instructions increases the risk of an
accident.
L
Tele Aid
Drive to
workshop!
One or more main functions of
the Tele Aid system are mal-
functioning.

Have the Tele Aid system checked by an authorized
Mercedes-Benz Center immediately.

310 Practical hintsWhat to do if ...Left display
Right display
Possible cause
Possible solution
#
Electric
consumers
offline!
The consumer battery has in-
sufficient voltage and can no
longer supply the convenience
functions.
The electrical consumers will come back online as soon as
on-board voltage is sufficient.
Battery/
Alternator
Stop vehicle!
The battery or the alternator is
malfunctioning.
The SBC brake system requires
electrical energy and therefore
has only limited operation.
Considerably greater brake
pedal force is required and the
stopping distance is increased.

Stop the vehicle as soon as it is safe to do so. Adjust driv-
ing to be consistent with reduced braking responsive-
ness.

Notify an authorized Mercedes-Benz Center immediate-
ly.

Observe the additional messages in the instrument clus-
ter.
Failure to follow these instructions increases the risk of an
accident.

311 Practical hints
What to do if ...
Left display
Right display
Possible cause
Possible solution
#
Visit
workshop!
The battery is no longer charg-
ing. Possible causes:

alternator malfunctioning


broken poly-V-belt
Do not forget that the brake
system requires electrical ener-
gy and may be operating with
restricted capability. Consider-
ably greater brake pedal force
is required and the stopping
distance is increased.

Stop your vehicle safely immediately and check the
poly-V-belt.
If it is broken:
Do not continue to drive. Otherwise the engine will
overheat due to an inoperative water pump which
may result in damage to the engine. Notify an
authorized Mercedes-Benz Center.
If it is in order:

Drive immediately to the nearest authorized
Mercedes-Benz Center. Adjust driving to be consis-
tent with reduced braking responsiveness.

Observe the additional messages in the instrument
cluster.
There is a malfunction in the
electronic system.

Have the system checked at an authorized
Mercedes-Benz Center immediately.