2005 MERCEDES-BENZ SLK-Class all

35 At a glance
Quick reference COMAND
The Sound menu appears.

Use or  to select the desired
function.

Press.
The system switches to the selected
function.
iYour harman/kardon® audio system
features the innovative LOGIC7®
multi-channel surround sound technol-
ogy developed for the professional re-
cording industry.
By selecting the “LOGIC7 Surround”
function, LOGIC7® will be activated.
LOGIC7® converts any 2-channel ma-
terial into breathtaking multi-channel
surround sound and that without the
unnatural interpretation of many of to-
day’s surround sound techniques.
iLOGIC7® is not an artificial “effects”
button. It automatically adapts itself to
the incoming source material, adjust-
ing the seven outputs based on the
original acoustic intent of the studio
master.
harman/kardon LOGIC7® creates a
true 360-degree “enveloping” sound-
field with a maximum “audio sweet-
spot” for all passengers.
harman/kardon LOGIC7® sets a new
benchmark in musical clarity and sepa-
ration, giving the listener the impres-
sion of actually “being there”.

36 At a glanceQuick reference COMAND
iLOGIC7® playback works with all con-
ventional stereo audio sources (e.g.
stereo CD or stereo radio).
If the radio reception is poor, the sys-
tem should be switched back to Stan-
dard stereo playback. Switching back
to Standard stereo playback may im-
prove audio quality.

38 AudioAudio main menu
Press.
The Audio main menu appears.
If one of the Audio submenus appears: 
Press the
Back
soft key as often as
necessary until the Audio main
menu appears;
or

Press again.Various audio sources can be selected in
the Audio main menu.
Selectable soft keys

Radio
soft key
Station settings for WB, FM, and AM
wavebands appear (
page 40),

CD soft key or
MP3
soft key
The Single CD main menu (
page 51)
or the MP3 main menu (
page 56) ap-
pears,

CDC
soft key
The CD changer main menu appears
(page 74),

AUX
soft key
Facilitates operation of an external au-
dio source (
page 82).
Calling up the Audio main menu
iThe
CD, MP3
or
CDC
soft key is available
only if a CD is loaded in the appropriate
compartment.
The Satellite Radio menu is accessed
by pressing5 (page 83).

43 Audio
Radio operation

Use , ,  or  to choose a
preset and press;
or

Press one of the number keys
3 - ".
The system tunes to the station stored
under this number.Tuning via Autostore presets
The Autostore function allows placing of
stations into the presets sorted by recep-
tion quality (
page 48).
The system will store the station with the
strongest signal in preset 1.
Ten presets each are available for FM and
AM.

Switch to the desired waveband
(page 40).

Press the
Autost.
soft key.
The Autostore preset list appears. It
can take several seconds until all fre-
quencies are displayed.

Use , ,  or  to choose a
preset and press;
or

Press one of the number keys
3 - ".
The system tunes to the station stored
under this number.

44 AudioRadio operationTuning via scan search
Scan search is characterized as follows:
Scan search performs two runs.
During the first run, stations with ex-
tremely good reception are played.
During the second run, stations with
weaker reception are played.

Scan search plays each receivable sta-
tion for approx. 8 seconds.

Scan search can be ended manually.

Scan search automatically stops at the
station listened to before the scan
search was started.Starting scan search

Switch to the desired waveband
(page 40).

Press the
Scan
soft key.
Scanning begins.
Ending Scan search manually

Press the
Scan
soft key again.Manual tuning

Switch to the desired waveband
(page 40).

Press- or, for at least 2
seconds to scroll up or down.
Manual tuning is activated.

Keep the button pressed or release it
and keep tapping- or, in
quick succession.
The frequency will change by the tuning
increments for the respective wave-
band each time one of the buttons is
pressed or for as long as a button is
pressed and held.
Manual tuning is deactivated if no but-
ton is pressed for approx. 3 seconds.

45 Audio
Radio operation
Tuning via direct frequency input
Entry example:
98.5 MHz in FM waveband

Switch to the FM waveband
(page 40).

Press2.
The frequency input display appears.
The frequency range of the FM wave-
band is shown.

Press the number buttons in
succession:!, , and .
Each number entered appears in the
display.
The system tunes to the frequency en-
tered (in this example: 98.5 Mhz)
and
switches back to the FM menu
.
iManual tuning is also possible in all
wavebands by pressingor.
The frequency will change by the tuning
increments for the respective wave-
band each time one of the buttons is
pressed.
Frequency increments for manual
tuning:
FM 0.2 MHz

AM 10 kHz
iEntries outside the frequency range are
not possible.
Within the AM waveband, the input is
restricted to frequencies within the re-
spective frequency increment, which
is10 kHz.
The system will select the nearest valid
frequency if a frequency outside the
frequency increment is entered.

47 Audio
Radio operation

Press one of the number keys
3 - .
The system tunes to the station stored
under this number.
Ten presets each are available for the
FM and AM waveband.
The following options are available:

Storing manually using number keys

Storing manually using the Presets
menu

Storing using Autostore (
page 48)Storing manually using the number
keys 3 - "

Tune to the station to be stored
(page 41).

Press a number key between3 and
" and hold it for more than 2 sec-
onds.
The station is now stored in the respec-
tive memory location.
Storing manually using the Presets
menu

Tune to the station to be stored
(page 41).

Press the
Presets
soft key.
The Presets menu appears.

Use, ,  or  to select a
preset.

Press for more than 2 seconds.
The station will be stored in the respec-
tive memory location.
Storing FM/AM stations

53 Audio
Single CD operation
On the COMAND control unit
Open the Single CD main menu
(page 51).

Press-for forward skipping;
or

Press, for backward skipping.
The tracks skip immediately after
pressing one of the buttons.
On the multifunction steering wheel

Switch the multifunction display in the
instrument cluster to the Single CD dis-
play (
page 25).

Pressj for forward skipping;
or

Pressk for backward skipping.
The tracks skip immediately after
pressing one of the buttons.
Selecting via track list
The track list contains all tracks of the cur-
rent CD. Only one list entry is visible at a
time, it is the number of the track currently
playing.

Use or  to select another track
from the list.
The current track remains playing while
selecting.

Press or wait approx. 3 seconds
without changing the selection.
The newly selected track is played.
Selecting via manual entry of the track
number

Open the Single CD main menu
(page 51).

Press2.
The Manual track input display ap-
pears.