2005 MERCEDES-BENZ SLK-Class reset

Contents
Entering an intersection . . . . . . . . 141
Entering a house number . . . . . . . 142
Entering a destination using the
map . . . . . . . . . . . . . . . . . . . . . . . 144
Entering a destination via geo
coordinates. . . . . . . . . . . . . . . . . . 146
Storing map locations. . . . . . . . . . 148
Route guidance . . . . . . . . . . . . . . . . . 150
Starting route guidance menu . . . 150
Route calculation . . . . . . . . . . . . . 150
Route re-calculation . . . . . . . . . . . 151
Navigation announcements . . . . . 151
Navigation displays. . . . . . . . . . . . 152
Destination reached . . . . . . . . . . . 155
Cancelling route guidance . . . . . . 155
During route guidance . . . . . . . . . . . . 156
Showing soft key displays . . . . . . 156
Info menu . . . . . . . . . . . . . . . . . . . 157
Displaying the route on the map . 157
Displaying the route list . . . . . . . . 158
Detour function . . . . . . . . . . . . . . 159
Stop-over . . . . . . . . . . . . . . . . . . . 161
Defining route guidance displays . 165
Setting symbols display . . . . . . . . 166
Setting map orientation . . . . . . . . 167
Switching GPS position display ON/OFF . . . . . . . . . . . . . . . . . . . . 168
Automatic map toggling . . . . . . . . 169
Scales for full-screen and
split-screen map display . . . . . . . . 170
Last destinations and destination
memory . . . . . . . . . . . . . . . . . . . . . . . 172
Last destinations memory . . . . . . 172
Destination memory . . . . . . . . . . . 174
POIs (Points of Interest) . . . . . . . . . . . 177
Entering POIs . . . . . . . . . . . . . . . . 177
Selecting POI in the local area of
the current position . . . . . . . . . . . 178
Selecting POI for a selected city. . 180
Selecting POI for a long-distance
destination . . . . . . . . . . . . . . . . . . 180
Selecting a POI using the map . . . 182
Service . . . . . . . . . . . . . . . . . . . . . . . 185
Tele Aid* . . . . . . . . . . . . . . . . . . . . . . 186
Emergency call system . . . . . . . . . 186
Roadside Assistance. . . . . . . . . . . 186
Information . . . . . . . . . . . . . . . . . . 187
System . . . . . . . . . . . . . . . . . . . . . . . 189
System settings . . . . . . . . . . . . . . . . . 190
Calling up the System menu . . . . . 190
Setting the date/time . . . . . . . . . . 190
Setting the language . . . . . . . . . . . 193
Switching confirmation beeps and
acoustic signals ON/OFF . . . . . . . 193
Display settings . . . . . . . . . . . . . . 194
Voice control settings* . . . . . . . . . 195
Reset function. . . . . . . . . . . . . . . . 199Glossary . . . . . . . . . . . . . . . . . . . . . . 201Index . . . . . . . . . . . . . . . . . . . . . . . . . 205

13 At a glance
Radio operating elements
Function
Page
1
Audio main menu
38
2
Soft keys
(multifunction buttons)
3
3 - "
Entering frequency man-
ually
Storing stations
Requesting station pre-
sets
45
47
42
Function
Page
4
, , , 
Tuning stations FM / AM
Station memory,
selecting presets
41
47
5

Confirmation
6
1
Mute function
39
Function
Page
7
.
Switching COMAND
ON/OFF
30
8
4
Volume adjustment
30
9
- and,
Station search
Manual tuning
42
44

25 At a glance
Multifunction steering wheel
You can switch the multifunction display to
the respective operating mode if you wish
to operate the system using the buttons on
the multifunction steering wheel. 
On the multifunction steering wheel,
pressè or ÿ repeatedly until
Radio, Single CD, MP3, CD changer*,
Satellite radio* or Telephone* display
appears in the multifunction display of
the instrument cluster.Radio operation
1Waveband and position in Preset menu
2Station frequency
Single CD operation
1Single CD operation
2Current trackMP3 operation
1MP3 operation
2Current track
CD changer* operation
1Current CD
2Current trackSelecting the multifunction display

26 At a glanceMultifunction steering wheelSatellite radio* operation
1SAT and position in Preset menu
2Channel nameTelephone* operation
If a telephone has been installed, either the
main display or a list appears.
Telephone main display:
1Telephone operation
2Telephone network informationIn the list screen, instead of the telephone
network information, either a phone book
entry or one of the last 10 outgoing calls
will be displayed.

In order to close the list display,
presst
.
This switches to the telephone main
display.

28 At a glanceMenu systemThe functions currently assigned to the
soft keys are displayed in the soft key sec-
tions 1.
Messages or settings are displayed in the
main area 2.
The settings can be changed by operating
controls accordingly.
The status bar 3 is divided into three ar-
eas.Left side:
The selected operating mode is given. In
this example: Radio
Center:
Indication of the selected operating mode.
In this example:

FM = selected waveband

1 = selected station is stored on
preset 1
Right side:
General status information is displayed, re-
gardless of the selected operating mode. In this example (
page 27):

ROAMING
= telephone* is logged into a
mobile communications network out-
side your home network.

= telephone* signal strength
Menu functions and submenus
Using the soft keys you can switch func-
tions ON or OFF or open submenus.
iA maximum of five soft keys may be
displayed on each side of the main area
2.

29 At a glance
Menu system
Example: Radio main menu:
The
Scan
soft key switches the scan
search ON or OFF.

The
Autost.
soft key opens the sub-
menu for the Autostore settings.In some situations, soft keys may not have
any function and thus not be available.
Should a soft key not be available, it will
appear shaded out, its characters will ap-
pear white.
Example:
Presets
, Scan
and
Autost.
soft key.Exiting from submenus
You can exit the current submenu by
pressing the
Back
soft key. The display
switches to the next higher menu level.
The system does not accept setting modi-
fications which have not been stored.
There are exceptions where pressing the
Back
soft key will also store new settings.
These exceptions, whenever applicable,
are referenced on the following pages.

34 At a glanceQuick reference COMANDStoring new settings:
Press or the
Back
soft key,
or

wait until the display changes.
If the vehicle is equipped with a sound sys-
tem*, the sound functions are available for
the following operating modes:

Radio

Single CD

MP3

CD changer*

AUX

Satellite radio*The following sound functions are avail-
able:

Default SettingsResets the sound functions* to the fac-
tory setting.

StandardNormal stereo playback.

SpeechPlayback optimized for speech compre-
hension.

LOGIC7 Surround7-channel-surround playback (not for
mono-sources like AM waveband or
Weather Band in radio mode).Different sound functions* can be activat-
ed for each one of the operating modes.
Example:
For CD mode: the
LOGIC7 Surround
function,
for Satellite radio* mode: the
Speech
func-
tion.
Switching sound functions*

Open the main menu of the appropriate
operating mode (
page 27).

Press the
Sound
soft key.
Sound functions*

41 Audio
Radio operation
The waveband is indicated in the center
of the status bar.
In this example: 
FM = FM waveband

1 = selected station is stored on
preset 1 (
page 47).The following options are available:

Tuning via station search(
page 42)

Tuning via station presets (
page 42)

Tuning via Autostore presets
(page 43)

Tuning via scan search (
page 44)

Manual tuning (
page 44)

Tuning via direct frequency input
(page 45)
iThe wavebands cover different fre-
quency ranges:
FM broadcast band:
FM (VHF = very high frequency)
87.7 - 107.9 MHz

Tuning increments 0.2 MHz
iAM broadcast band:
MW (medium wave)
530 - 1710 kHz

Tuning increments 10 kHz
WB waveband:

WB (Weather Band)
162.400 - 162.550 MHz

Tuning increments = 1 channel
Tuning to a FM/AM station