2005 MERCEDES-BENZ S-Class play cd

37 Audio
Radio operation
You can use the following functions:
Automatic seek tuning (
page 37)

Manual tuning (
page 37)

Station selection from the Preset menu
(page 38)

Station selection via direct frequency
entry (FM, AM) (
page 39)

Automatic station scan (FM, AM)
(page 39)

Station selection from the FM/AM
Autostore presets (
page 43)Automatic seek tuning

Press g or h.
or

Press g or G.
FM and AM Bands, Weather Band (WB)
The radio will tune in to the next receivable
station (FM, AM) or channel (WB) with de-
scending/ascending frequency depending
on the direction of seek.
WB
Alternatively, you can select the channel
directly:

Press a number key 1 through 7.Manual tuning (FM, AM)

Activate the desired wave band
(page 36).

Press g or h longer than 2 se-
conds.
The function is active.
or

Press H or h.
The frequency will change by the tuning
increments for the respective
waveband each time one of the buttons
is pressed.
FM Band
The frequency displayed will change in in-
crements of 0.2 MHz.
AM Band
Tuning will take place in increments of
10 kHz.
Selecting a station
iThe selected channel is not shown in
the status line.

38 AudioRadio operationStation selection via number keypad
(presets)
FM and AM Bands
Press one of the number keys, such as
2 briefly.
The radio will tune to the frequency as-
signed to that memory location. If none
has been set by you, the radio will not
change the station.Station selection via direct frequency
entry (FM, AM)
E.g.: 102.7 MHz in the FM band

Activate the desired waveband
(page 36).

Press *.
An input line will appear.

Enter the desired frequency with the
number keys within 8 seconds, e.g.
1027 for 102.7 FM.
The station you have selected will
begin to play.
iFM and AM presets are independent
and can only be accessed while in the
corresponding band.
Saving stations for FM and AM
(page 40).
Frequency band
Frequency range
FM
AM
87.7 - 107.9 FM
530 - 1710 AM

39 Audio
Radio operation
FM, AM band
Entries outside the frequency range are
not possible.Automatic station scan (FM, AM)
The stations in a given waveband (FM, AM)
can be scanned one after the other for 8
seconds each.
The scan function stops automatically
when the first station received has been
scanned twice.Start scan function

Activate the desired wave band
(page 36).

Press the
Scan
soft key.
The scan function will begin.
Scan
will
appear in black lettering.
End scan function and play a station

Press the
Scan
soft key again if you
hear the desired station.
iIf you do not make another entry within
8 seconds, the function will be canceled
and you will listen to the station last tu-
ned to.
iStation scan performs two runs. During
the first run, stations with good
reception are played. During the
second run, stations with weaker
reception are played.

44 AudioCD operation

CD operationGeneral Information on CD operationWarning
G
In order to avoid distraction which could
lead to an accident, the driver should insert
CDs with the vehicle at a standstill and
operate the audio system only if permitted
by road, weather and traffic conditions.
Bear in mind that at a speed of just 30 mph
(approximately 50 km/h), your car covers a
distance of 44 feet (approximately 14 m)
every second.
Warning
G
The CD drive and CD changer* are Class 1
laser products. There is a danger of invisible
laser radiation when you open or damage
the cover.
Do not remove the cover. The CD drive and
the CD changer* do not contain any parts
which can be serviced by the user. For safe-
ty reasons, have any necessary service work
performed by qualified personnel.iOnly use CDs, which bear the label
shown and that conform to the compact
standard (IEC 60908). You can there-
fore only use CDs with a maximum
thickness of 1.3 mm.
iThe COMAND CD drive may not be able
to play audio CDs with copy protection
or copied CDs.!Use only CDs with a diameter of 12 cm,
do not use 8-cm CDs.
An 8-cm CD adapter may cause dama-
ge to the CD changer* or to the
COMAND and should not be used. iYour CD drive has been designed to
play CDs which correspond to the IEC
60908 standard.
If you insert thicker data carriers, e.g.
ones that have data on both sides (one
side with DVD data, the other side with
audio data), they cannot be ejected
and will damage the drive.

46 AudioCD operationPlayback locations for audio CDs are:
the CD drive in the COMAND

the CD changer*.
Differences regarding the CD mode depen-
ding on the audio source are highlighted.

In the Audio menu (
page 34), press
the
CD
soft key (for CD drive) or
the
CD
soft key (for CD changer*).
CD changer* main menu1CD changer*
CD
or CD drive
CD
2Current track/number of tracks on the
current CD
3Elapsed playback time of the current
track
CD drive
CD changer*
Switching to CD operation
iThe
CD-Mag
soft key is only assigned
when the CD changer* is active.
The
Sound
soft key appears if the
COMAND is provided with sound
functions* (page 31).
iThe CD drive in the COMAND can
playback audio CDs, MP3-CDs
(page 55). The slot of the drive is
behind the display.
iThe CD changer* can accomodate up
to 6 audio CDs. It is located on the left-
hand side in the trunk.
Loading CDsWarning
G
In order to avoid distraction which could
lead to an accident, the driver should insert
CDs with the vehicle at a standstill and
operate the audio system only if permitted
by road, weather and traffic conditions.
Bear in mind that at a speed of just 30 mph
(approximately 50 km/h), your car covers a
distance of 44 feet (approximately 14 m)
every second. iThe COMAND may be unable to
playback audio CDs provided with copy
protection.

47 Audio
CD operation
Loading a CD into the CD drive
With the COMAND switched on, press
l.
The display moves up and the CD/DVD
slot is visible.

Insert a CD into the slot. The CD should
be inserted with the label side up.
The COMAND pulls the CD into the
drive. The message
Loading Medium
Please Wait
will appear.After that the CD main menu
(
page 46) will appear. Playback
begins with track 1 of the CD inserted.
Ejecting a CD

With the COMAND switched on, press
l.
The display moves up and the system
ejects the CD already loaded.

Remove the CD from the slot.

Insert another CD into the slot.
or

Press l again to close the slot if you
do not wish to insert another CD.
Ejecting/loading CDs into/from the CD
changer*
The CD changer* is located on the left-
hand side in the trunk. Open panel cover to
access the CD changer*.
iA CD already loaded must be ejected
before inserting a new CD. Inserting a
second CD with another CD still loaded
will cause damage to the CD drive
which is not covered by the Mercedes-
Benz Limited Warranty. iIf you do not insert the CD into the slot
within around 15 seconds, the
COMAND will close the slot.
iIf you do not remove the CD from the
slot within around 15 seconds, the
COMAND will pull the CD into the drive
again and close the slot.

48 AudioCD operationRemoving the magazine:
Slide the cover of the CD changer*
open.

Press the green l button on the
CD changer*.
The magazine will slide out.
Inserting CDs into the magazine:

Pull the disk tray forward until it stops.

Remove any previously inserted CD.

Place a CD in the tray. The CD should
be inserted with the label side up.

Push the CD tray into the magazine
completely.

Repeat these four steps to load more
CDs into the magazine.
Reading the magazine in:

Slide the magazine into the CD changer
until it clicks into place (listen for the
click).
The CD changer* reads the magazine.
The message
Magazine Scan
Please Wait will appear.

Slide the cover of the CD changer*
closed.CD drive

Activate the Audio menu (
page 34).

Press the
CD
soft key
.
The CD main menu is displayed.
If no audio CD has been inserted, the
message
No CD
appears.

Load an audio CD into the CD drive
(page 47).
CD changer*

Activate the Audio menu (
page 34).

Press the
CD
soft key
.
The CD changer* main menu will
appear.
The CD last played begins to play.
iYou can also slide out the magazine if
COMAND is switched off.
However, the l button will not
function If the battery is not connected
or drained.
iWhen you push the magazine in, the
arrow on the upper side of the
magazine must point in the direction of
the CD changer*.
Switching on

49 Audio
CD operation
CD changer* main menu

If the last played CD is not available, the
next available audio CD is played back.No magazine in the CD changer*:
The message
No Magazine
will appear.

Load audio CDs into the CD changer*
(page 47).
No CD in the magazine:
The message
Magazine Empty
will
appear.

Load audio CDs into the CD changer*
(page 47).
You can select a CD:

in the CD list (
page 49)

with the number keypad (
page 50)

in the Magazine menu (
page 50)In the CD list
The CD list includes all loaded CDs. Only
one list entry is visible at a time.
The entry is displayed above the track
indication. It shows the number or the
name of the CD currently playing.

Use h or H to select another CD
from the list.
After the CD is loaded, it is played
back.
or

Do not change the selection.
Playback of the last played CD is
continued.
iThe name of the CD and the track
played are displayed if the information
is available.
Selecting a CD (CD changer* only)
iSelection is possible if the
CD changer* has loaded the magazine
and at least two audio CDs are loaded.