2005 MERCEDES-BENZ G55AMG garage door opener

Contents
Automatic transmission ..................... 148
One-touch gearshifting................. 149
Gear ranges ................................. 150
Gear selector lever position ......... 151
Accelerator position ..................... 153
Emergency operation
(Limp Home Mode) ...................... 153
Transfer case ..................................... 154
Gear range ................................... 154
Switching transfer case................ 154
Differential locks ............................... 156
A few words about differentials
and differential locks.................... 157
Switching differential locks
on and off..................................... 158
Good visibility .................................... 160
Rear view mirror........................... 160
Headlamp cleaning system .......... 162
Sun visors .................................... 162
Rear window defroster ................. 163Climate control ................................... 164
Setting the temperature................ 166
Adjusting air distribution and
volume .......................................... 167
Defrosting ..................................... 168
Air recirculation ............................ 168
Residual engine heat utilization .... 169
Deactivating the climate control
system .......................................... 169
Air conditioning............................. 170
Rear passenger compartment
adjustable air vents....................... 170
Power windows .................................. 171
Opening and closing the
windows ........................................ 171
Power tilt/sliding sunroof................... 173
Opening and closing the power
tilt/sliding sunroof ........................ 173
Driving systems .................................. 176
Cruise control ............................... 176
Rear Parking Assist* ..................... 179Loading .............................................. 182
Roof rack ...................................... 182
Cargo compartment cover ............ 182
Enlarged cargo compartment ....... 183
Split rear seat bench .................... 183
Partition net* (MB Accessory) ...... 185
Loading instructions ..................... 187
Cargo tie-down rings..................... 189
Useful features ................................... 190
Storage compartments ................. 190
Ashtrays........................................ 194
Cigarette lighter............................ 195
Electrical outlet............................. 196
Floormats ..................................... 196
Telephone* ................................... 197
Tele Aid......................................... 198
Garage door opener ...................... 206
Heated steering wheel .................. 211

30 At a glanceOverhead control panel
Item
Page
1
Tele Aid (emergency call
system)
198
2
Cargo compartment lamps
118
3
Right front reading lamp
116
4
Power tilt/sliding sunroof
173
5
Interior rear view mirror
41
Item
Page
6
Signal transmitter buttons
for garage door opener
206
7
Indicator lamp for garage
door opener
206
8
Interior lighting control
116
9
Left front reading lamp
116

206 Controls in detailUseful featuresGarage door opener
The built-in remote control is capable of
operating up to three separately controlled
devices, for example garage door openers,
gate openers, or other devices compatible
with HomeLink® or some other systems.
You can program the signal transmitter
buttons.
Remote control integrated into the interior
rear view mirror1Indicator lamp
2 3 4Signal transmitter button
5Hand-held transmitter button
6Hand-held remote control trans-
mitter (not part of the vehicle
equipment)
Warning!
G
Before programming the integrated remote
control to a garage door opener or gate op-
erator, make sure people and objects are
out of the way of the device to prevent po-
tential harm or damage. When programming
a garage door opener, the door moves up or
down. When programming a gate operator,
the gate opens or closes.
Do not use the integrated remote control
with any garage door opener that lacks safe-
ty stop and reverse features as required by
U.S. federal safety standards (this includes
any garage door opener model manufac-
tured before April 1, 1982). A garage door
that cannot detect an object - signaling the
door to stop and reverse - does not meet
current U.S. federal safety standards.

207 Controls in detail
Useful features
iCertain types of garage door openers
are incompatible with the integrated
opener. If you should experience diffi-
culties with programming the transmit-
ter, contact an authorized
Mercedes-Benz Light Truck Center, or
call Mercedes-Benz Customer
Assistance Center (in the USA only) at
1-800-FOR-MERCedes, or Customer
Service (in Canada) at
1-800-387-0100.
iUSA only:
This device complies with Part 15 of
the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful
interference, and
(2) this device must accept any inter-
ference received, including interfer-
ence that may cause undesired
operation.
Any unauthorized modification to this
device could void the user’s authority
to operate the equipment.
iCanada only:
This device complies with RSS-210 of
Industry Canada. Operation is subject
to the following two conditions:
(1) This device may not cause interfer-
ence, and
(2) this device must accept any inter-
ference received, including interfer-
ence that may cause undesired
operation of the device.
Any unauthorized modification to this
device could void the user’s authority
to operate the equipment.

209 Controls in detail
Useful features
Step 7:
To program the remaining two buttons,
repeat the steps above starting with
step 3.
Rolling code programming
To train a garage door opener (or other roll-
ing code devices) with the rolling code fea-
ture, follow these instructions after
completing the “Programming” portion
(steps 1 through 6) of this text. (A second
person may make the following training
procedures quicker and easier.)
Step 8:

Locate “training” button on the garage
door opener motor head unit. Exact location and color of the button
may vary by garage door opener brand.
Depending on manufacturer, the “train-
ing” button may also be referred to as
“learn”or “smart” button. If there is dif-
ficulty locating the transmitting button,
refer to the garage door opener opera-
tor’s manual.
Step 9:

Press “training” button on the garage
door opener motor head unit.
The “training light” is activated.
You have 30 seconds to initiate the follow-
ing step.
Step 10:

Firmly press, hold for two seconds and
release the programmed integrated
signal transmitter button (2, 3
or4).
Step 11:

Press, hold for two seconds and re-
lease same button a second time to
complete the training process.Some garage door openers (or other rolling
code equipped devices) may require you to
perform this procedure a third time to
complete the training.
Step 12:

Confirm the garage door operation by
pressing the programmed integrated
signal transmitter button (2, 3
or4).
Step 13:

To program the remaining two buttons,
repeat the steps above starting with
step 3.
Gate operator/Canadian programming
Canadian radio-frequency laws require
transmitter signals to “time-out” (or quit)
after several seconds of transmission
which may not be long enough for the inte-
grated signal transmitter to pick up the sig-
nal during programming. Similar to this
Canadian law, some U.S. gate operators
are designed to “time-out” in the same
manner.
iIf the indicator lamp1 blinks rapidly
for about two seconds and then turns
to a constant light, continue with pro-
gramming steps 8 through 12 as your
garage door opener may be equipped
with the “rolling code” feature.

395 Index
Fuel additives 377
Fuel consumption statistics
After start 144
Since last reset 144
Fuel filler flap 235
Locking 235
Opening 326
Unlocking 235
Fuel requirements 377
Fuel reserve tank
Message in display 311
Fuel tank
Capacity 374
Filler flap 235
Fuels, coolants, lubricants, etc.
Capacities 374
Functions (control system) 125, 127
Resetting 133
Fuse box 360, 361, 362
Fuses 360
Fuse box in battery box 360
Fuse box in front passenger
footwell 361
Fuse box in middle tunnel 362
Fuse box in passenger
compartment 360G
Garage door opener 30, 206
Gasoline see Fuel
Gasoline additives 377
GAWR 271
Gear range 383
Automatic transmission 150
Limiting 150
Shifting into optimal 150
Transfer case 154
Gear range limit
Canceling 150
Gear selector lever
Cleaning 284
Position 151
Position (automatic
transmission) 148
Global
Locking 94
Unlocking 94
Global Positioning System (GPS) 383
Glove box 23, 190
Closing 190
Opening 190Good visibility 160
GPS 383
Gross Axle Weight Rating see GAWR
Gross Trailer Weight see GTW
Gross Vehicle Weight Rating see GVWR
Gross Vehicle Weight see GVW
GTW 271
GVW 272
GVWR 272