2005 MERCEDES-BENZ G55AMG buttons

209 Controls in detail
Useful features
Step 7:
To program the remaining two buttons,
repeat the steps above starting with
step 3.
Rolling code programming
To train a garage door opener (or other roll-
ing code devices) with the rolling code fea-
ture, follow these instructions after
completing the “Programming” portion
(steps 1 through 6) of this text. (A second
person may make the following training
procedures quicker and easier.)
Step 8:

Locate “training” button on the garage
door opener motor head unit. Exact location and color of the button
may vary by garage door opener brand.
Depending on manufacturer, the “train-
ing” button may also be referred to as
“learn”or “smart” button. If there is dif-
ficulty locating the transmitting button,
refer to the garage door opener opera-
tor’s manual.
Step 9:

Press “training” button on the garage
door opener motor head unit.
The “training light” is activated.
You have 30 seconds to initiate the follow-
ing step.
Step 10:

Firmly press, hold for two seconds and
release the programmed integrated
signal transmitter button (2, 3
or4).
Step 11:

Press, hold for two seconds and re-
lease same button a second time to
complete the training process.Some garage door openers (or other rolling
code equipped devices) may require you to
perform this procedure a third time to
complete the training.
Step 12:

Confirm the garage door operation by
pressing the programmed integrated
signal transmitter button (2, 3
or4).
Step 13:

To program the remaining two buttons,
repeat the steps above starting with
step 3.
Gate operator/Canadian programming
Canadian radio-frequency laws require
transmitter signals to “time-out” (or quit)
after several seconds of transmission
which may not be long enough for the inte-
grated signal transmitter to pick up the sig-
nal during programming. Similar to this
Canadian law, some U.S. gate operators
are designed to “time-out” in the same
manner.
iIf the indicator lamp1 blinks rapidly
for about two seconds and then turns
to a constant light, continue with pro-
gramming steps 8 through 12 as your
garage door opener may be equipped
with the “rolling code” feature.

210 Controls in detailUseful featuresIf you live in Canada or if you are having dif-
ficulties programming a gate operator (re-
gardless of where you live) by using the
programming procedures, replace step 4
with the following:
Step 4:
Continue to press and hold the inte-
grated signal transmitter button (2,
3 or4) while you press and re-press
(“cycle”) your hand-held remote con-
trol transmitter6 every two seconds
until the frequency signal has bee-
learned. Upon successful training, the
indicator lamp1 will flash slowly and
then rapidly after several seconds.

Proceed with programming step 5 and
step 6 to complete. Operation of integrated remote control

Switch on the ignition (
page 35).

Select and press the appropriate inte-
grated signal transmitter button (2,
3 or4) to activate the remote con-
trolled device.
The integrated remote control trans-
mitter continues to send the signal as
long as the button is pressed – up to
20 seconds.
Erasing the integrated remote control
memory

Switch on the ignition (
page 35).

Simultaneously hold down the signal
transmitter buttons2 and 4, for ap-
proximately 20 seconds, until the indi-
cator lamp1 blinks rapidly. Do not
hold for longer than 30 seconds.
The codes of all three channels are
erased.Reprogramming a single integrated sig-
nal transmitter button
To program a device using a signal trans-
mitter button previously trained, follow
these steps:

Press and hold the desired signal trans-
mitter button (2, 3 or4). Do not re-
lease the button.

The indicator lamp will begin to flash af-
ter 20 seconds. Without releasing the
integrated signal transmitter button,
proceed with programming starting
with step 3.iIf you sell your vehicle, erase the codes
of all three channels.

381 Technical terms
ABS
(A
ntilock B
rake S
ystem)
Prevents the wheels from locking up
during braking so that the vehicle can
continue to be steered.
Accessory weight
(
page 271)
Air pressure
(page 271)
Aspect ratio
(page 271)
BabySmart
TM1
airbag deactivation
system
This system detects if a special system
compatible child restraint seat is in-
stalled on the front passenger seat. The
system will automatically deactivate
the passenger front airbag when such a
seat is properly installed (indicator
lamp7 in the center console
comes on).BabySmart
TM
compatible child seats
Special restraint system for children.
The sensor system for the passenger
seat prevents deployment of the pas-
senger front airbag if a BabySmart
TM
compatible child seat is installed. See
an authorized Mercedes-Benz Light
Truck Center for availability.
BAS
(B
rake A
ssist S
ystem)
System for potentially reducing braking
distances in emergency braking situa-
tions. The system is activated when it
senses an emergency based on how
fast the brake is applied.
Bar
(
page 271)
Bead
(page 271)CAC
(C
ustomer A
ssistance C
enter)
Mercedes-Benz customer service cen-
ter, which can help you with any ques-
tions about your vehicle and provide
assistance in the event of a break-
down.
CAN system
(C
ontroller A
rea N
etwork)
Data bus network serving to control ve-
hicle functions such as door locking or
windshield wiping.
Cockpit
All instruments, switches, buttons and
indicator/warning lamps in the passen-
ger compartment needed for vehicle
operation and monitoring.
Cold tire inflation pressure
(
page 271)
1BabySmart
TM is a trademark of Siemens
Automotive Corp.

382 Technical termsCOMAND
(C
ockpit M
anagement and D
ata
System)
Information and operating center for
vehicle sound and communications
systems, including the radio and the
navigation system, as well as other op-
tional equipment (CD changer, tele-
phone, etc.).
Control system
The control system is used to call up
vehicle information and to change
component settings. Information and
messages appear in the multifunction
display. The driver uses the buttons on
the multifunction steering wheel to
navigate through the system and to ad-
just settings.
Differential locks
On slippery surfaces, differential locks
prevent one wheel of an axle from spin-
ning while the other wheel stands still,
resulting in driving force no longer be-
ing transferred.Cruise control
Driving convenience system that auto-
matically maintains the vehicle speed
set by the driver.
Curb weight
(
page 271)
DOT
(Department o
f Transportation)
(
page 271)
Engine number
The number set by the manufacturer
and placed on the cylinder block to
uniquely identify each engine pro-
duced.
Engine oil viscosity
Measurement for the inner friction (vis-
cosity) of the oil at different tempera-
tures. The higher the temperature an
oil can tolerate without becoming thin,
or the lower the temperature it can tol-
erate without becoming viscous, the
better the viscosity.ESP
(E
lectronic S
tability Pr
ogram)
Improves vehicle handling and direc-
tional stability.
ETD
(E
mergency T
ensioning D
evice)
Device which deploys in certain frontal
and rear collisions exceeding the sys-
tem's threshold to tighten the seat
belts.
->SRS
FSS (Canada vehicles)
(F
lexible S
ervice S
ystem)
Maintenance service indicator in the
speedometer display that informs the
driver when the next vehicle mainte-
nance service is due. FSS evaluates en-
gine temperature, oil level, vehicle
speed, engine speed, distance driven
and the time elapsed since your last
service, and calls for the next mainte-
nance service accordingly.

400 IndexMessages in the multifunction display
Symbol messages 302
Text messages 298
Middle tunnel
Fuse box in 362
Miles/kilometers in speedometer
Setting 136
Mirrors
Activating exterior rear view mirror
parking position 161
Adjusting 41
Auto-dimming for rear view
mirror 160
Exterior rear view mirror 41
Exterior rear view mirror parking
positions 143
Interior rear view mirror 41
Storing exterior rear view mirror
parking position 109
MON 236
MON (Motor Octane Number) 384
Monitoring reach
Rear Parking Assist* 180
Mph or km/h in speedometer
setting 136Multicontour seat* 104
Multifunction display 123, 384
Selecting language 136
Standard display 127
Multifunction display messages
ABS 298
BAS 298
Battery 302, 303
Brake fluid 303
Brake pads 303
Check engine 292
Coolant 305, 306, 307
Cruise control 308
Display 320
Doors 308
Engine 292
Engine air filter 308
Engine oil 309
ESP 300
Fuel reserve tank 311
Hood 311
Key 311
Lamps 312, 314
Parking brake 304
Sunroof 319Tailgate 320
Tele Aid 319
Telephone* 319
Washer fluid 320
Multifunction steering wheel 26, 124
Buttons 124

407 Index
Snow chains 276
Spare parts see Parts service
Spare wheel 323
Mounting 347
Speed
Setting current 177
Speed settings
Cruise control 178
Speedometer 25
Setting units 136
Speedometer display mode
Selecting 136
Split rear bench seat 183
SRS 70, 385
Indicator lamp 294
Standing lamp, front
Replacing bulbs 336
Standing lamps
Replacing bulbs 334
Standing water
Driving instructions 222
Starter switch 23, 35
Positions 35
Starting difficulties 49
Starting position 35
Starting the engine 48Station (radio)
Search 129
Station selection
Setting 141
Steep terrain 226
Steering column
Adjusting in /out 40
Adjusting up/down 40
Steering wheel
Adjusting 40
Adjusting in/out 40
Adjusting up/down 40
Buttons 26
Cleaning 284
Heated 211
Stolen vehicle
Stolen Vehicle Recovery
services 205
Stopping
Tilt/sliding sunroof 174
Windows 171
Storage bags
In rear passenger compartment 193
Storage compartments 190
Armrest 191
Below armrest 191Cup holders 192, 193
Glove box 190
In front of armrest 191
Parcel net in front passenger
footwell 193
Storage bags 193
Storage spaces
Cup holders 191
Storing (memory function)
Positions into memory 108
Storing tires 250
Submenus
Convenience 142
For settings 125
In control system 127
Instrument cluster 135
Lighting 137
Resetting functions in Control
system 133
Selecting 133
Settings menu 133
Vehicle 141
Summer opening feature 172
Sun visors 162
Sunroof
Messages in display 319