Page 208 of 416

208 Controls in detailUseful featuresProgramming or reprogramming the in-
tegrated remote control
Step 1:
Switch on the ignition (
page 35).
Step 2:
If you have previously programmed an
integrated signal transmitter button
and wish to retain its programming,
proceed to step 3. Otherwise, press
and hold the two outer signal transmit-
ter buttons2 and4 and release
them only when the indicator lamp1
begins to flash after approximately
20 seconds (do not hold the button for
longer than 30 seconds). This proce-
dure erases any previous settings for
all three channels and initializes the
memory. If you later wish to program a
second and/or third hand-held trans-
mitter to the remaining two signal
transmitter buttons, do not repeat this
step and begin directly with step 3.Step 3:
Hold the end of the hand-held remote
control transmitter6 of the device
you wish to train approximately 2 to
5 in (5 to12 cm) away from the surface
of the integrated remote control locat-
ed on the interior rear view mirror,
keeping the indicator lamp1 in view.
Step 4:
Using both hands, simultaneously
press the hand-held transmitter
button5 and the desired integrated
signal transmitter button (2, 3
or4). Do not release the buttons until
completing step 5.
The indicator lamp1 on the integrat-
ed remote control will flash, first slowly
and then rapidly.Step 5:
When the indicator lamp1 flashes
rapidly, release both buttons.
Step 6:
Press and hold the just-trained inte-
grated signal transmitter button and
observe the indicator lamp1.
If the indicator lamp1 stays on con-
stantly, programming is complete and
your device should activate when the
integrated signal transmitter button is
pressed and released.iThe indicator lamp1 flashes the first
time the signal transmitter button is
programmed. If this button has already
been programmed, the indicator lamp
will only start flashing after 20 sec-
onds.
Page 397 of 416
397 Index
Instrument cluster 24, 120, 383
Cleaning 284
Coolant temperature display 120
Illumination 120
Lamps in 294
Multifunction display 123
Outside temperature indicator 122
Selecting language 136
Instrument lighting 120
Instruments and controls see Cockpit
Interior lighting 116
Delayed shut-off 140
Manual operation 117
Interior rear view mirror
Adjusting 41
Intermittent wiping 54
Interval wiping 55
Switching off 55
Switching on 55J
Jack 322
Jump starting 354K
Key, mechanical 325
Key, SmartKey
Battery check lamp 94
Checking the batteries 95
Factory setting 94
Global locking 94
Global unlocking 94
Loss of 96
Positions in starter switch 35
Remote controls 92
Restoring to factory setting 95
Selective setting 94
Starting the engine 49
Unlocking with 34
Key-dependency memory
Settings 143
Keys 92
Kickdown 153, 383
Kilometers/miles in speedometer 136
Kilopascal 272
Km/h or mph in speedometer 136
Page 404 of 416

404 IndexR
Radio
Satellite (USA only) 129
Selecting stations 129
Station search 129
Station selection setting 141
Radio transmitters, control and
operation 231
Range (distance to empty)
Calling up 145
Range of sensor
Rear Parking Assist* 180
Reading lamp 30
Rear axle differential lock
Switching on 159
Rear bench seat
Foldable 183
Rear door window
Blocking operation 78
Rear fog lamp
Replacing bulbs 342
Rear lamps see Tail lampsRear Parking Assist* 179, 384
Cleaning sensors 283
Malfunction 181
Monitoring reach 180
Warning indicators 181
Rear seat head restraints 102
Installing 103
Removing 103
Rear towing eye 359
Rear view mirror auto-dimming 160
Rear view mirrors see Mirrors
Rear window defroster 163
Activating 163
Deactivating 163
Rear window wiper/washer 54
Recommended inflation pressure 272
Reconnecting
Vehicle battery 353
Recovery services
For stolen vehicle 205
Refrigerant
Air conditioning 376
Refueling 235
Regular checks 236Remote controls
SmartKey 92
Remote door unlock
With Tele Aid 205
Removing
Cargo compartment cover 183
Wheel 349
Wiper blades 344
Replacing
Brake lamp bulbs 334
Bulbs 333
Front lamp bulbs 335
Rear lamp bulbs 334, 341
SmartKey batteries 331
Wiper blades 344
Resetting
All functions (control system) 132
All functions of a submenu 133
Fuel consumption 144
Maintenance service indicator 279
Trip odometer 121
Residual heat utilization 384
REST (Residual engine heat
utilization) 384
Page:
< prev 1-8 9-16 17-24