2005 MERCEDES-BENZ E320CDI level indicator

Contents
At the gas station .............................. 299
Refueling ...................................... 299
Check regularly and before a
long trip........................................ 301
Engine compartment ......................... 303
Hood ............................................ 303
Engine oil ..................................... 304
Transmission fluid level ................ 308
Coolant level ................................ 308
Battery ......................................... 309
Windshield washer system and
headlamp cleaning system* ......... 310
Tires and wheels ................................ 311
Important guidelines .................... 311
Tire care and maintenance........... 312
Direction of rotation ..................... 314
Loading the vehicle ...................... 314
Recommended tire inflation
pressure ....................................... 320
Checking tire inflation pressure ... 322
Tire labeling.................................. 327
Load identification ....................... 331
DOT, Tire Identification Number
(TIN) ............................................. 332
Maximum tire load ....................... 333
Maximum tire inflation pressure .. 334Uniform Tire Quality Grading
Standards (U.S. vehicles) .............. 334
Tire ply material ............................ 336
Tire and loading terminology......... 337
Rotating tires ................................ 340
Winter driving ..................................... 341
Winter tires ................................... 341
Block heater* (Canada only) ......... 342
Snow chains.................................. 342
Maintenance....................................... 343
Clearing the maintenance service
indicator........................................ 344
Maintenance service term
exceeded ...................................... 344
Calling up the maintenance
service indicator ........................... 345
Resetting the maintenance
service indicator ........................... 345
Setting the date for special
works ............................................ 346
Calling up the maintenance
service data information ............... 347
Vehicle care........................................ 348
Cleaning and care of vehicle ......... 348
Practical hints.................................. 355
What to do if … ................................... 356
Lamps in instrument cluster ......... 356
Lamp in center console ................ 365
Vehicle status messages in the
multifunction display .................... 367
Where will I find ...? ............................ 407
First aid kit.................................... 407
Spare wheel .................................. 407
Luggage box ................................. 408
Vehicle tool kit.............................. 409
Unlocking/locking in an emergency .. 410
Unlocking the vehicle ................... 410
Locking the vehicle ....................... 411
Fuel filler flap emergency release . 412
Manually unlocking the
transmission selector lever ........... 412
Opening/closing in an emergency ..... 414
Power tilt/sliding sunroof* or
panorama roof with power tilt/s
liding panel* ................................. 414
Replacing SmartKey batteries ............ 415
SmartKey ...................................... 415
SmartKey with KEYLESS-GO* ....... 416

70 Safety and SecurityOccupant safety
Emergency tensioning device (ETD),
seat belt force limiter
The seat belts for the front and rear outer
seats are equipped with emergency ten-
sioning devices and belt force limiters.
The ETD is designed to activate in the fol-
lowing cases:

in frontal or rear-end impacts exceed-
ing a preset severity level


in certain vehicle rollovers


if the restraint systems are operational
and functioning correctly, see
1indicator lamp (
page 60)


Never wear belts over rigid or breakable
objects in or on your clothing, such as
eyeglasses, pens, SmartKeys etc., as
these might cause injuries.


Position the lap belt as low as possible
on your hips and not across the abdo-
men. If the belt is positioned across your
abdomen, it could cause serious injuries
in a crash.


Never use a seat belt for more than one
person at a time. Do not fasten a seat
belt around a person and another per-
son or other objects.


Belts should not be worn twisted. In a
crash, you wouldn’t have the full width
of the belt to distribute impact forces.
The twisted belt against your body could
cause injuries.


Pregnant women should also use a
lap-shoulder belt. The lap belt portion
should be positioned as low as possible
on the hips to avoid any possible pres-
sure on the abdomen.


Never place your feet on the instrument
panel, dashboard, or on the seat. Always
keep both feet on the floor in front of the
seat.


When using a seat belt to secure infant
or toddler restraints or children in boost-
er seats, always follow the child seat
manufacturer's instructions.
iThe ETDs for the front seats will only
activate if the front seat belts are fas-
tened (latch plate properly inserted
into buckle).
The ETDs for the rear outer seats will
activate with or without the respective
seat belts fastened.


127 Controls in detailSeats
Drive-dynamic features
Activating
Press button4 (
page 126).
The indicator lamp in the button comes
on for five seconds and the following
display appears in the multi-function
display for about five seconds.
Deactivating

Press button4 (
page 126) again.
The indicator lamp in the button goes
out.Massage function (PULSE)
The massage function can help prevent
muscle tension during long drives.

Press button6 (
page 126).
The indicator lamp in button2 comes
on. The air cushions in the lumbar area
pulsate.
Seat heating*
Both switches for the front seats are locat-
ed in the center console. The red indicator
lamps in the switch come on to show
which heating level you have selected.
iYou can adjust the characteristics of
the Drive - Dynamic seat using the con-
trol system (
page 169).
iWhen the engine is turned off, the last
cushion setting is retained in memory.
The cushion is automatically adjusted
to this setting when the engine is re-
started.iThe massage function turns off auto-
matically after approximately five min-
utes.
Leveloff
No indicator lamps on
1
One indicator lamp on
2
Two indicator lamps onThe seat heater automatically
switches to level 1 after approxi-
mately ten minutes.
3
Three indicator lamps onThe seat heater automatically
switches to level 2 after approxi-
mately five minutes.

128 Controls in detailSeats1Seat heating switch
Switch on the ignition (
page 33).
Switching seat heating on

Press button1 repeatedly until the
desired heating level is set.
One or more red indicator lamps on the
switch show the selected heater level.Switching seat heating off

Press button1 repeatedly until all in-
dicator lamps go out.
Seat ventilation*
The switch is located on the center con-
sole. Seat ventilation can be activated
manually with the ignition on, or by the
summer opening feature (
page 220).
The blue indicator lamps on the switch
show the ventilation level selected:
iThe seat heating will be automatically
switched off after approximately
20 minutes.!If one or more of the lamps on the seat
heater switch are flashing, there is in-
sufficient voltage available since too
many electrical consumers are turned
on. The seat heater switches off auto-
matically.
The seat heater will switch back on
again automatically as soon as suffi-
cient voltage is available.
Level3
Three indicator lamps on
2
Two indicator lamps on
1
One indicator lamp on
off
No indicator lamp on

198 Controls in detailDual-zone automatic climate controlAdjusting air distribution
Adjusting manually
Use air distribution control4
(page 194) or (
page 195) to adjust the
air distribution.

Press air distribution rocker switch4
(page 194) or (
page 195) until the
display shows the desired setting.
The indicator lamp on the buttonU
goes out and the current air distribu-
tion appears in the air distribution
display9 (
page 194) or 8
(
page 195).Adjusting automatically

Press button U(
page 194) or
(
page 195).
The indicator lamp on the button
comes on. The air distribution is adjust-
ed automatically.
Adjusting center air vents:
The thumbwheels for left2 and right6
(
page 192) center air vents are automat-
ically positioned for optimum interior air-
flow. In this position, center air vent4
(page 192) and adjustable left and right
center vents3 and5 (
page 192) are
fully opened.
Windshield fogged on the outside

Switch the windshield wipers on
(page 52).

Press button U(
page 194) or
(
page 195).
The indicator lamp on the button
comes on.
Adjusting air volume
Adjusting manually
Five blower speeds are available.
Press
to decrease orQ to in-
crease air volume (
page 194) or
(
page 195) to the desired level.
The indicator lamp on the Ubutton
(page 194) or (
page 195) goes
out. The selected blower speed is
shown in the display.
Adjusting automatically

Press the U button (
page 194) or
(
page 195).
The indicator lamp on the Ubutton
comes on. The air volume is adjusted
automatically.
Symbol
Function
a
Directs air through the center,
side and rear passenger com-
partment air vents
Z
Directs air to the windows
X
Directs air into the entire
vehicle interior
Y
Directs air to the footwells

211 Controls in detail
4-zone automatic climate control*
Adjusting manually
Turn air distribution controls on each
side of the passenger compartment to
the desired symbol.
The indicator lamp in theU button
goes out.
Adjusting automatically

Press left or rightU button
(page 206) or (
page 207).
The indicator lamp in theU button
illuminates. The air distribution is ad-
justed automatically.
Windshield fogged on the outside

Switch the windshield wipers on.

Press the left or rightU button
(page 206) or (
page 207).
Adjusting air volume
Adjusting manually
Nine blower speeds are available.
Press
to decrease or Q
(page 206) or (
page 207) to in-
crease air volume to the desired level.
The
AUTO
display disappears and the
automatic mode is switched off. The
selected blower speed is shown in the
display.
Adjusting automatically

Press left or right U button
(page 206) or (
page 207).
The
AUTO
display appears and the air
volume is adjusted automatically.
Defrosting
Activating
Press buttonP(
page 206) or
button0 (
page 207).
The indicator lamp on the button
comes on.
The air conditioning switches
automatically to the following functions:


maximum blowing and heating
power


air flows onto the windshield and
the front side windows


the air recirculation mode is
switched off
iThese settings should only be selected
for a short time.

247 Controls in detail
Driving systems
Airmatic DC (Dual Control)*
Airmatic automatically selects the opti-
mum suspension tuning and ride height for
your vehicle. The Airmatic consists of two
components:

Adaptive Damping System (ADS)


Vehicle level control
The ADS automatically selects the opti-
mum damping for the respective driving
conditions. At the same time the suspen-
sion is set to either sporty or comfort.
Suspension tuning
The suspension tuning is set according to:


Your driving style


Road surface conditions


Your choice of suspension style,
“sporty I”, “sporty II” or “comfortable”,
which you select using the damping
button.The following suspension styles are
available:


Comfortable
Both indicator lamps2 are off.


Sporty I
One indicator lamp2 is on.


Sporty II
Both indicator lamps2 are on.
1Damping button
2Indicator lamps

Start the engine.

Press the damping button1 until the
desired suspension style is set.iThe selected suspension style is stored
in memory, even after the SmartKey is
removed from the starter switch.iIn the sporty suspension style the vehi-
cle is lowered up to 0.6 in (15 mm).

249 Controls in detail
Driving systems
The following vehicle level settings can be
selected when the vehicle is stationary and
the engine is running:
The button is located in the lower section
of the center console.
1Vehicle level control button
2Indicator lamp

Briefly press button1 to change from
“Normal” level to “Raised” level. When
vehicle is at “Raised” level, pressing
the switch will return the vehicle to
“Normal” level.
Vehicle level when
stationary
Use for
Ride height increase
over normal
Automatic lowering
Indicator lamp (
page 249)
Normal
Normal operation
None
Max. approx. 0.6 in (15 mm)
Lamp off
Raised
Driving with snow
chains or very
rough road sur-
face conditions
Approx. 0.8 in (20 mm)
Max. approx. 1.4 in (35 mm)
Lamp on
iAt a speed of approximately above
75 mph (120 km / h) or if the speed
amounts to between 50 mph
(80 km / h) and 75 mph (120 km / h)
for approximately five minutes, the set-
ting “Raised” is canceled. The message Leveling cancelled
appears in the
multifunction display.
If you do not drive in this speed range,
the “Raised” level remains stored even
if the SmartKey is removed from the
starter switch.