2005 MERCEDES-BENZ E-Class fuse

91 Telephone*
Telephone operation
Answering calls
On the COMAND control unit
Press.On the multifunction steering wheel

Presss
.
In both cases the call is active. Commu-
nication is conducted via the hands-free
system. The call volume can be adjusted
(
page 30).
For other user functions, see
“Active call” (
page 96).
Ending or refusing a call
On the COMAND control unit

Press.
On the multifunction steering wheel

Presst
.The desired phone number has to be en-
tered when placing an outgoing call.
The following options are available:

entering a phone number directly
(page 92)

initiating redial (
page 92)

selecting an entry in the accepted and
missed calls list (
page 93)

selecting an entry in the dialed calls list
(page 94)

using speed dial (
page 95)

opening the phone book and selecting
an entry (
page 99)
iThe caller’s number appears only if it is
transmitted.
The caller’s name only appears if, in ad-
dition, the number and the name are
stored in the phone book (
page 98).
iIt is also possible to accept, refuse or
end a call from the cellular phone
(Telephone Operation Guide).
Placing an outgoing call

115 Navigation*
Destination entry
Deleting a character
Press the
Delete
soft key, if necessary.
The character last accepted by the sys-
tem is deleted.
Confirming the data entry
After entering all the characters data entry
must be confirmed.

Press and hold  for approx. 2 sec-
onds to confirm the entry;
or

Use or  to select the sym-
bol and press.One frequently used destination address
can be established as the Home address.

Call up the Navigation main menu
(page 110).

Press the
Home
soft key.
A message No home
address
stored
appears
or if a home address has already been
established, the home address ap-
pears.

To start route guidance to the estab-
lished home address press.
or

To enter or change the home address,
press the
Change
soft key.
The Navigation main menu with menu
items to change the home address ap-
pears.
iDo not confuse the
Delete
soft key (de-
letion of the last character) with the
Back
soft key (deletion of the complete
entry).
ok
iThe symbol can only be selected if
the system has recognized data entry.Entering a home address
ok


118 Navigation*Destination entry
Useor  to select a region.

Press .
Selecting a different region deletes the
city last entered. The first city of the
newly selected region appears (in al-
phabetical order).
The Destination entry menu (
page 117)
represents the starting point.
Enter city (USA)
appears in the status bar.
The characters in parenthesis indicate the
selected region.
Accepting the displayed destination

Press and hold  for approx. 2 sec-
onds.Entering a different city

Use the keypad menu or the 12 buttton
keypad to enter the data of the city
(page 114).
After entering the city a selection list of
cities appears. Now continue with se-
lecting a city.
Switching to a selection list is possible at
any time while entering a city.

Press the
List
soft key.
The selection list appears. Now contin-
ue with selecting a city.
Entering a city
iDo not confuse the button with the
symbol in the main screen. ok

124 Navigation*Destination entryA house number can be entered after en-
tering the destination street (
page 121).

Press the
Hse. no.
soft key.The Enter House Number menu ap-
pears (
page 124), or the house num-
ber list appears. Now a house number
range can be selected (
page 125).
Enter House Number menu


Use, , ,, or to
select the numbers. Press after
each selection.
or

Press
-  to enter the numbers.

Press the
Delete
soft key if necessary.
The number last accepted by the sys-
tem is deleted.

Press and hold  for approx. 2 sec-
onds to confirm the input;
or
Entering a house numberiAn intersection instead of a house
number can be entered (
page 123).
Entry of both is not possible.
iThe
Hse. no.
soft key is only available
when registered house numbers are
stored on the navigation DVD for the
selected street.
iSymbol “”XX represents a space.iDo not confuse the
Delete
soft key (de-
letion of the last number) with the
Back

soft key (deletion of the complete en-
try).

150 Navigation*Last destinations and destination memory
If necessary, use,  or to se-
lect one of the shift fields.

Press.
The characters are shifted.

Use , , , ,  or  to
select the characters. Press  after
each selection.

If necessary, press the
Delete
soft key
to delete the character last entered.

Upon completion of the name entry
press and hold  for approx. 2 sec-
onds;
or

Use or  to select the sym-
bol and press .
The system will store the address.
iDo not confuse the
Delete
soft key (de-
letion of the last character) with the
Back
soft key (deletion of the complete
entry).
ok