2005 MERCEDES-BENZ C-Class audio

15 At a glance
CD operating elements
Function
Page
1
Audio menu
34
2
Soft keys
(multifunction keys)
3
Color screen with CD
changer* main menu
The status bar indicates
CD status information
49
49
4
1 - 0, *
Selecting a CD (CD
changer* only)
Track select
51
52
5
Push the joystick to
H and h
Selecting a CD (CD
changer* only)
Push the joystick to
g and G
Track select
Press E to confirm
51
52
Function
Page
6
l
Ejecting/loading a CD into
the CD driveiThere are two l
buttons. One is on the
display unit. The other is
located left of the CD
AUDIO slot behind the
display.
The CD changer* is
located in the glove box.
45
7
J
Muting
55
8
Volume control
28
9
e Switching on and off
27
Function
Page
a,
b
d and D
Track select
Fast forward/reverse
52
54

24 At a glanceMenu system

Menu systemThe menu system allows for easy
operation of COMAND.
Main menus are provided for the following
main functions:
Audio (radio, CD, CD changer*)

Satellite radio*

Telephone*

Navigation

ServiceCalling up main menus Menu display
A display may consist of three areas.
Example: FM menu
1Soft keys area
2Main area
3Status bar
The functions currently assigned to the
soft keys are displayed in the soft key
sections 1.
Main function
Activating main
menu
Audio
(page 34)

Press A.
Satellite radio*
(page 62)

Press B.
Telephone*
(page 78)

Press a.
Navigation
(page 96)

Press b.
Service
(page 152)

Press C.

27 At a glance
Quick reference COMAND

Quick reference COMAND
Switching on
Turn the key in the starter switch to
position 1 or 2 if the COMAND was
switched off by turning the key in the
starter switch to position 0 and
removing it.
or

Press e.
In both cases, the system will activate
the operating mode which was active
when the system was switched off.Switching off

Turn the key in the starter switch to
position 0 and pull the key out.
or

Press e.
When the audio is playing, the volume
knob will adjust the audio volume, and also
the volume for telephone and navigation.
During a telephone call (talking or ringing),
the volume knob will adjust the telephone
voice and ringer volume.
The volume for the navigation announce-
ments can only be changed while an
announcement is being made.
When you adjust the volume, the system
will automatically store the setting for the
current operating mode.
iYou have the following options to
control the system:
at the COMAND

at the multifunction steering wheel
(refer to vehicle Operator’s Manual)
This Operator’s Manual describes the
control at the COMAND.
Unless otherwise indicated, the
descriptions and illustrations refer to
the COMAND.
Switching the COMAND control unit
on and offiFor an explanation of starter switch
positions, refer to vehicle Operator’s
Manual.iIf the key is not in the starter switch in
position 1 or 2, the system will automa-
tically stop after around 30 minutes.
Volume

29 At a glance
Quick reference COMAND
Common balance and fader settings apply
to the following systems:
Radio operation

CD operation (
CD
)

CD changer* operation (
CD
)

AUX

Satellite radio*
When you make balance or fader settings,
the system will automatically save the
settings for the current operating mode
and others.Setting balance and fader
In any audio source operation:

Press the
Bal/Fad
soft key.
Cross-hairs are displayed. The
horizontal hair line indicates the
balance setting. The vertical hair line
indicates the fader setting. You can
now make balance and fader settings.

Push the joystick to H or h.
Move the cross-hairs horizontally and
adjust the balance.
or

Push the joystick to g or G.
Move the cross-hairs vertically and
adjust the fader.

Press E or the
Back
soft key.
or

Wait until the display changes.
The new setting is saved.
Balance and fader
iPush the joystick to F and f to
move the cross-hairs simultaneously in
vertical and horizontal direction.

30 At a glanceQuick reference COMANDDifferent bass and treble settings are
possible for the following operating modes:
Radio: FM-, AM- and
Weather (WB) bands

Single CD (
CD
) and CD changer*
(
CD
)

AUX

Satellite radio*
When you adjust bass or treble, the
settings apply to other sources within the
group, but not to the other modes. For
example, if you adjust the bass while
listening to FM, that same bass level
applies to AM and Weather band, but not
to satellite radio* or CD.
Activating the Bass or Treble menu
In any audio source operation:

Press the Bass or Treble soft key.
The Bass or Treble menu will appear. Making Bass and Treble settings

Push the joystick to H or h.
Bass or Treble is adjusted.

Press E or the
Back
soft key.
or

Wait until the display changes.
The new setting is saved.

If your vehicle is equipped with the
premium sound system*, the sound
functions* will be available for the
following operating modes:
Radio: FM-, AM- and
Weather (WB) bands

Single CD (
CD
) and CD changer*
(
CD
)

AUX

Satellite radio*
The following sound functions* are
available:

Default Settings:COMAND sets the default settings
(Bass, Treble, Bal/Fad) for the active
source mode.

Standard:COMAND sets the sound linear for the
center of the vehicle.
Bass and Treble
iPress the
Bass
or
Treble
soft key and
keep it depressed to move the cursor
continuously. Release the soft key to
set the current value.
Sound functions*

31 At a glance
Quick reference COMAND

Speech:Playback optimized for language
comprehensibility.

LOGIC7 Surround:Surround playback.
You can use different sound functions* for
the modes mentioned above.
E.g.:
For radio operation the function
Standard
, for CD operation the function
LOGIC7 Surround
.Activating the sound functions*
In any audio source operation:

Activate the main menu for the
respective operating mode
(page 24).

Press the
Sound
soft key.
The Sound menu will appear.

Push the joystick to g or G to
select the desired function.

Press E.
The function is activated.
iLOGIC7 Surround sound offers a sound
quality superior to conventional stereo
sound.
If the radio reception is poor, the
system should be switched back to
standard stereo playback. Switching
back to standard stereo playback may
improve reception quality.

33 Audio
Radio operation
CD operation
AUX operation

34 AudioRadio operation

Radio operationIn chapter “Audio” you will find detailed
information regarding
radio operation

CD operation (CD drive, CD changer*)

AUX operation
If you have not done so already, please fa-
miliarize yourself with these functions by
reading chapter “At a glance”.

Press A.
Audio menu
If an audio submenu is displayed, press
the
Back
soft key until the Audio menu
is displayed.
or

Press A again.

In the Audio menu, press the soft key
for the desired audio source.
Switching On

Press J.
The system mutes the active audio
source and theß symbol is displayed
in the status bar. The soft keys on the
left side are greyed out in some
submenus.
Switching off

Press J again.
or

Turn the rotary control at the e key to
adjust the volume.
or

Press g or h.
The soft keys on the left side are
selectable again.
Warning
G
In order to avoid distraction which could
lead to an accident, the driver should enter
system settings with the vehicle at a stand-
still and operate the audio system only if
permitted by road, weather and traffic con-
ditions.
Bear in mind that at a speed of just 30 mph
(approximately 50 km/h), your vehicle is co-
vering a distance of 44 feet (approximately
14 m) every second.
Opening the Audio menuiThe
CD
soft key is available if a CD
changer* is connected to the
COMAND.
Selecting an audio sourceMuting