2005 MAZDA MODEL B3000 TRUCK Owners Manual

Page 145 of 256

MAZDA MODEL B3000 TRUCK 2005  Owners Manual Fuse/RelayLocation Fuse Amp
Rating Power Distribution Box
Description
42 7.5A* Trailer tow (left turn)
43 — Not used
44 — Not used
45A — Wiper HI/LO relay 45B — Wiper Park/Run relay
46A — Fu

Page 146 of 256

MAZDA MODEL B3000 TRUCK 2005  Owners Manual 3.0L and 4.0L engines (if equipped)
The high-current fuses are coded as follows:
Fuse/RelayLocation Fuse Amp
Rating Power Distribution Box
Description
1 50A** Passenger compartment fuse
panel
2 — No

Page 147 of 256

MAZDA MODEL B3000 TRUCK 2005  Owners Manual Fuse/RelayLocation Fuse Amp
Rating Power Distribution Box
Description
12 — Not used
13 30A** Blower motor (climate control)
14 — Not used
15 30A** Anti-lock Brake System (ABS) (solenoids)
16 — N

Page 148 of 256

MAZDA MODEL B3000 TRUCK 2005  Owners Manual Fuse/RelayLocation Fuse Amp
Rating Power Distribution Box
Description
42 7.5A* Trailer tow (left turn)
43 — Not used
44 — Not used
45A — Wiper HI/LO relay 45B — Wiper Park/Run relay
46A — A/

Page 149 of 256

MAZDA MODEL B3000 TRUCK 2005  Owners Manual •If steam is coming from the engine compartment:do not go near
the front of the vehicle. Stop the engine, then turn the ignition switch
to the ON position without starting the engine. The radiator c

Page 150 of 256

MAZDA MODEL B3000 TRUCK 2005  Owners Manual It is not recommended that the vehicle be operated in 4WD modes with
a “temporary” (i.e. dissimilar size) spare. If 4WD operation is necessary,
do not operate above speeds of 16 km/h (10 mph) or f

Page 151 of 256

MAZDA MODEL B3000 TRUCK 2005  Owners Manual ToolLocation
Spare tire Under the vehicle, just forward of
the rear bumper
Jack, jack handle, wheel nut wrench Regular Cab: behind seats and
underneath the jack and tools
cover
Cab Plus: stowed in the

Page 152 of 256

MAZDA MODEL B3000 TRUCK 2005  Owners Manual 2. If equipped, unlock and removethe spare tire carrier lock from
the rear access hole located just
above the rear bumper and
below the tailgate.
3. Insert the straight end of the jack handle into the