2005 LOTUS ELISE chassis

C; Garage use with 4-point lift. Do not use if the diffuser panel is
fitted. Beneath the outboard end of the chassis crossmember ahead of the rear wheelarches. Take care to position the jack
between the fixing screws for the fuel tank bay perforated
undershield. Avoid the fuel tank brackets.
D; Do not use if the diffuser panel is fitted. Beneath the rear
subframe, close to the lower wishbone rearmost mountings.
NOTICE: In order fully to exploit the benefits of light weight, and
to maximise stowage space, the Elise has no provision for spare
wheel carriage or lifting jack. A temporary puncture repair facility is provided in the form of a tire inflator aerosol (see page 124).
Fuel Tank Undershield
WARNING: The perforated panel enclosing the underside of the fuel
tank bay, contributes to the structural rigidity of the chassis
frame. Do not use the car with this panel removed.
Lifting & Towing
149

oh_croft_InD.indd 14920/05/2004 07:59:18ProCarManuals.com

Important Safety Information About ModificationsDo not remove any original equipment or modify your car
in any way that would alter its design or operation. This could
make your car unsafe or illegal to drive. For example, do not install wheels and tires with a differ
-
ent overall diameter. Such modifications can adversely affect handling, and interfere with the operation of the car’s anti-lock
brakes and other systems. In addition, any modifications that decrease ground clearance
beyond Lotus approval, increase the chance of undercarriage
parts striking a kerb, speed bump, or other raised object, which
could cause your airbags to deploy as well as damaging the
chassis and body underside. Do not modify your steering wheel or any other part of your air
-
bag system. Modifications could make the system ineffective.
WARNING: Do not attach or place objects on the airbag covers.
Any object attached to or placed on the covers marked
‘AIRBAG’, in the centre of the steering wheel and on top of the dashboard, could interfere with the proper operation of the airbags. Or, if the airbags inflate, the objects could be propelled inside the car and hurt someone.
Accessories
151

oh_croft_InD.indd 15120/05/2004 07:59:18ProCarManuals.com

Unladen weight - total 912 kg ) inc.
(heaviest) - front 344 kg ) full fuel
- rear 568 kg ) tank
Max. weight - total 1162 kg > incl.
- front 441 kg > occupants
- rear 721 kg > & luggage
Trailer towing Not permissible
Capacities Engine oil (refill inc. filter) 4.7 U.S. qt. (4.4 litre)
(+3.7 U.S. qt (3.5) litre if front mounted oil coolers are drained) High/low dipstick mark difference 1.6 U.S. qt. (1.5 litre)
Transmission oil 2.4 U.S. qt. (2.3 litre)
Fuel tank 10.6 U.S. gall. (40 litre)
Cooling system 12.7 U.S. qt. (12 litre)
A.C. refrigerant (R134a) 1.2 lb (0.55 kg)
Front Suspension

T ype Independent. Upper and
lower wishbone co-axial
coil spring/telescopic
damper unit; anti-roll bar
Steering axis inclination 12° nominal
Geometry specification - Standard: Mid-laden ride height (reference height for geometry check)
- front 135 mm below front end
of chassis siderail
- rear 135 mm below rear end
of chassis siderail
Castor - optimum + 3.8°
- tolerance range + 3.5° to + 4.1°;
max. side/side 0.35°
Camber - optimum - 0.1°
- tolerance range + 0.1° to - 0.3°
max. side/side 0.2°
Alignment - optimum Zero - tolerance range 0.5 mm toe-out, to
0.7mm toe-in overall
Technical Data
156

oh_croft_InD.indd 15620/05/2004 07:59:19ProCarManuals.com

Geometry specification - Sport option:Mid-laden ride height (reference height for geometry check)
- front 130 mm below front end
of chassis siderail
- rear 130 mm below rear end
of chassis siderail
Castor - optimum + 3.8°
- tolerance range + 3.5° to + 4.1°;
max. side/side 0.35°
Camber - optimum - 0.3°
- tolerance range - 0.1° to - 0.5°
max. side/side 0.2°
Alignment - optimum Zero - tolerance range 0.5 mm toe-out, to
0.5 mm toe-in overall
Rear Suspension
Type Independent. Upper and
lower wishbone; co-axial
coil spring/telescopic
damper.
Geometry specification - Standard: Mid-laden ride height (reference height for geometry check)
- front 135 mm below front end
of chassis siderail
- rear 135 mm below rear end
of chassis siderail
Camber - optimum - 1.8°
- tolerance range - 1.6° to - 2.0°
max.side/side 0.2°
Alignment - optimum 1.2 mm toe-in each side - tolerance range 1.2 to 1.8mm toe-in each
side
max.side/side 0.3 mm
Geometry specification - Sport option: Mid-laden ride height (reference height for geometry check)
- front 130 mm below front end
of chassis siderail
- rear 130 mm below rear end
of chassis siderail
Technical Data
157

oh_croft_InD.indd 15720/05/2004 07:59:20ProCarManuals.com

(b) LIMITED WARRANTY - Replacement Parts.
The obligations of the Company during the warranty term
are limited to the repair or, at its option, the replacement of
any genuine Lotus part determined to be defective in mate
-
rial or workmanship during the warranty period expressed in
paragraph 1(b). All replaced parts shall become the property
of the Company.
(c) LIMITED WARRANTY - Corrosion Perforation.
The Company warrants to the original owner and each subse-
quent owner during the warranty period set forth in Paragraph
1(c), that if corrosion perforation occurs on the chassis or com
-
posite body structure of a Lotus motor car, within the warranty
period expressed in Paragraph 1(c), the parts or components
affected by such perforation shall be repaired or replaced,
without charge for labour or parts. Provided, however, that:
a) the Lotus car must be brought to an authorised Lotus dealer
for inspection at least one time each year; and
b) the Lotus car has been used and maintained in a normal and reasonable manner.
c) corrosion perforation is not due to any or all of the follow
-
ing: an accident; abuse; damage; installation of an accessory;
chemical substance; an act of nature; fire; or salvaged car.
(d) OBTAINING REPAIRS.
All warranted repairs will be effected at Lotus Dealers upon
presentation of suitable evidence of eligibility. A reasonable
time must be allowed for the dealership to perform necessary
repairs, and customers are requested to allow such a reason
-
able amount of time. It is not Lotus Cars USA’s responsibility to
provide the customer with a loan car during these repairs. The
provision of a loan car should be discussed with the dealer.
5. EXCLUSIONS FROM WARRANTY COVERAGE (see also section 6)
(a) TIRES. The only provided warranty for tires is the written
warranty issued by the tire supplier and included with the owner literature supplied with your car.
(b) CAR SPECIFICATION. The obligations of the Company
under this Limited Warranty apply only to cars built by the manufacturer to USA specification for road use (i.e. not to
Limited Warranty
164

oh_croft_InD.indd 16420/05/2004 07:59:21ProCarManuals.com

The Queen’s Award for Enterprise
The Queen’s Award for Enterprise is the highest honour that
can be bestowed upon a British company and is the UK’s top award for business performance. The award is given annually
by Her Majesty The Queen and the winning companies hold it
for five years.
Group Lotus PLC and its staff were awarded The Queen’s
Award for Enterprise 2002 for the whole group’s outstanding achievement in international trade. Lotus Cars has sold its prestigious sports car models into over 30 countries around the
world and Lotus Engineering, which has been investing heavily in engine and chassis research, is regarded as one of the world’s
leading engineering consultancy groups.
The Lotus Elise now proudly displays The Queen’s Award
logo on the rear window. This logo symbolises the achieve
-
ments of Group Lotus over the last few years culminating in the company being given the Award in 2002 – the year of The
Queen’s Golden Jubilee.
The Queen’s Award scheme was introduced in 1966, originally
as The Queen’s Award to Industry before becoming known as
The Queen’s Award for Enterprise in 1999.
Her Majesty The Queen makes the Awards on the advice of
the Prime Minister, who is assisted by an Advisory Committee
that includes representatives of Government, industry and com
-
merce, and the trade unions. They are announced on 21 April,
The Queen’s personal birthday.
For more information about The Queen’s Awards, please see
www.queensawards.org.uk
The Queen’s Award
191

oh_croft_InD.indd 19120/05/2004 07:59:26ProCarManuals.com