2005 LEXUS LS430 light

KEYS AND DOORS
37
The operational range of the wireless remote control is
approximately 1 m (3 ft.). The effective range may vary with
different conditions. To activate the wireless remote control
without fail, do it approximately 1 m (3 ft.) from your Lexus.
In the following cases, th
e battery in the key may be
discharged. If this is a case, replace the battery using a special
screwdriver. For the key of Type A, we recommend that you
have the battery replaced by your Lexus dealer to prevent the
key from being damaged.
 The remote control does not work.
 The operational range of wireless remote control becomes
extremely short.
 The indicator light on the key is dimmed or does not come
on.
For the replacement of the battery of the Type B key, see
“Replacing the battery” on page 44. You can also have the
battery of the key replaced by your Lexus dealer.
If you lose the wireless function key, contact your Lexus dealer
as soon as possible to avoid the possibility of theft, or an
accident. (See “If you lose your keys or lock yourself out” on
page 424.)
If your vehicle is equipped with smart key system, you can use
up to 5 master keys and 3 valet keys for the same vehicle. In
case of the vehicle not equipped with smart key system, up to
4 master keys are available. Contact your Lexus dealer for
detailed information. The wireless remote control function key is an electronic
component. Observe the following instructions in order
not to cause damage to the key.

Do not leave the wireless remote control function key in
places where the temperature becomes high such as on the
dashboard.
 Do not disassemble it.
 Avoid knocking it hard against other objects or dropping it.
 Avoid putting it in water.

KEYS AND DOORS
38
Locking/Unlocking the doors
When you push the “LOCK” button on the key briefly, all
the doors can be locked from outside the vehicle.
At this time, you can hear one beep and the turn signal lights
flash once.* However, when you push the “LOCK” button with
any door not closed securely, the buzzer sounds for 10
seconds.** To stop the buzzer, close all the doors securely or
push the “UNLOCK” button. If the key is in the ignition switch,
locking cannot be done.
NOTE:
* The turn signal lights can be set not to flash.
** The buzzer can be set not to sound if a door is not closed
securely.
Ask your Lexus dealer for details.
If outer foot lights are illuminated, you can turn off the lights by
pushing the “LOCK” button on the key. (For details, see “Outer
foot lights” on page 233.)
NOTICE
Do not push the “LOCK” button any longer than 2 to 3
seconds. Pushing the button longer activates an alarm.
For details, see page 40.
When you push the “UNLOCK” button, the driver’s door
is unlocked and outer foot lights come on. Pushing the
“UNLOCK” button once again within 3 seconds from the
first push, all other doors are also unlocked.*
For outer foot lights, see “Outer foot lights” on page 233.
NOTE:
* The 2step unlocking function can be changed.
Ask your Lexus dealer for details.
At this time, two beeps sound and the turn signal lights flash
twice.* Together with the activation of unlocking, the interior
light comes on for 15 seconds if the interior light switch is in
“DOOR” position.** However, this function does not work
when the ignition switch is in the “ACC” or “ON” position. \
For
further information, see “Interior lights” on page 112.
You have 30 seconds to open a door after using the wireless
remote unlock feature.*** If a door is not opened by then, all
the doors will be automatically locked again.
NOTE:
* The turn signal lights can be set not to flash.
** The interior light can be set not to come on or the duration
of lighting can be changed.
*** The time before automatic relocking can be changed.
Ask your Lexus dealer for details.
Even if the “LOCK” or “UNLOCK” button is kept pressed in, the
locking or unlocking operation is not repeated. Release the
button and then push it again.

KEYS AND DOORS
44
NOTICE
Make sure the positive side and negative side of the
battery are faced correctly.
 Do not replace the battery with wet hands. Water may
cause unexpected rust.
 Do not touch or move any components inside the
transmitter, or it may interfere with proper operation.
 Be careful not to bend the electrode when inserting
the battery and that dust or oils do not adhere to the
inside of the module.
6. Install the battery base into the module.
NOTICE
Take care not to damage or bend the battery base when
installing.
7. Install the module into the main frame.
8. Install the cover back on the side of the key by sliding it using
your finger.
9. When pushing any switch on the wireless key, make sure
the indicator light comes on.
Replacing the battery (Type B)
When you replace the battery, prepare a lithium battery
CR1616 or equivalent and a special screwdriver.
CAUTION
Special care should be taken to prevent small children
from swallowing the removed battery or components.
NOTICE
 When replacing the battery, be c areful not to lose the
components, screws and Oring.
 Replace only with the same or equivalent type
recommended by a Lexus dealer.
 Dispose of used batteries according to the local laws.
11L0281
1. Remove the screw, and then the cover while pushing it in the

KEYS AND DOORS
45
arrow direction.
11L0291
2. Remove the module from the key frame.
11L0301
3. Remove the 2 screws to take out the lid of the module.
4. Take out the discharged battery and put a new battery with
the positive side up.
NOTICE

Make sure the positive side and negative side of the
battery are faced correctly.
 Do not replace the battery with wet hands. Water may
cause unexpected rust.
 Do not touch or move any components inside the
transmitter, or it may interfere with proper operation.
 Be careful not to bend the electrode when inserting
the battery and that dust or oils do not adhere to the
inside of the module.
 Take care not to lose the screws and Oring.
5. Install the lid with the 2 screws.
NOTICE
Take care not to damage or bend the Oring when
installing.
6. Install the module into the key frame and secure the cover
with the screw.
7. When pushing any switch on the wireless key, make sure
the indicator light comes on.

KEYS AND DOORS
48
Locking with power door lock switch
11L367
 1Lock 2Unlock
To lock all the doors simultaneously, push the power door
lock switch down on the front side. Pushing down on the
rear side will unlock them.
When you push the power door lock switch on the rear side to
unlock the doors to allow a passenger to get in, the outer foot
lights come on. To turn off the lights, push the power door lock
switch on the front side. (For details, see “Outer foot lights” \
on
page 233.)
The same switch is also found on the front passenger’s side.
However, pushing this switch will neither turn on nor off the
outer foot lights. Auto door locking function*:
A l l t h e d o o r s w i l l l o c k
automatically when the selector lever is moved out of “P”
position. This auto door locking function is operable if any
doors are unlocked while the ignition switch is in the “ON”
position.
NOTE:
* This setting can be changed as in the following:
 All the doors are locked automatically at 20 km/h (12
mph) or higher vehicle speed. However, if any door is
unlocked during driving, this auto locking function does
not operate until the unlocked door is once opened.
 When the selector lever is moved out of “P” position and
the brake pedal is held off your foot, this function is
enabled.
Ask your Lexus dealer for details.

KEYS AND DOORS
50
THEFT DETERRENT SYSTEM
17L013
To deter theft of the vehicle, this system is designed to
sound an alarm if any of the doors, trunk or hood is
forcibly unlocked or opened or the battery terminal is
disconnected and then reconnected while the vehicle is
locked.
The alarm blows the horn intermittently, flashes the headlights,
tail lights, turn signal lights and other exterior lights. When the
interior light switch is in the “DOOR” position, the interior lights
also turn on.
After the alarm is activated, when you unlock any door or the
trunk using an ignition key or wireless remote control or smart
key system, the tail lights turn on for about 2 seconds to inform
you that the system was activated.
17L021
 Security indicator light
Setting the system
In the case of the smart key system:
1. Turn the ignition switch to the “LOCK” position.
The engine immobilizer system causes to the indicator light to
flash.
2. Close and lock all the doors, trunk and hood using an
ignition key or wireless remote control or smart key
system.
If you lock them with wireless remote control or smart key
system, the turn signals flash once.*
NOTE:
* The turn signals can be set not to flash.
Ask your Lexus dealer for details.

KEYS AND DOORS
51
The flashing indicator light will stay on when all the doors, trunk
and hood are closed and locked.
3. After 30 seconds, the indicator starts flashing and the
system is set.
After the system is set, when you close the trunk which is
opened
with an ignition key or wireless remote control or smart
key system, the system is set again. However, this function
operates only when the door is not unlocked during which the
trunk is opened and closed.
In case of the ignition switch with the key inserted:
1. Turn the ignition key to the “LOCK” position and
remove it.
The engine immobilizer system causes the indicator light to
flash.
2. Close and lock all the doors, trunk and hood using an
ignition key or wireless remote control or smart key
system.
If you lock them with wireless remote control or smart key
system, the turn signals flash once.*
NOTE:
* The turn signals can be set not to flash.
Ask your Lexus dealer for details.
The flashing indicator light will stay on when all the doors, trunk
and hood are closed and locked. 3. After 30 seconds, the indicator starts flashing and the
system is set.
After the system is set, when you close the trunk which is
opened
with an ignition key or wireless remote control or smart
key system, the system is set again. However, this function
operates only when the door is not unlocked during which the
trunk is opened and closed.
Cancelling the system
When you unlock any door using an ignition key , wireless
remote control or smart key system, the system is
cancelled.
If you unlock any door with the wireless remote control or smart
key system, the turn signals flash twice.*
NOTE:
* The turn signals can be set not to flash.
Ask your Lexus dealer for details.

KEYS AND DOORS
52
Activating the system
The alarm sounds for 60 seconds if any of the following are
operated:
Unlocking any door or trunk without using an ignition key,
wireless remote control or smart key system.
 Opening the hood forcibly.
 Reconnecting the battery.
 Hot− wiring the ignition.
If any door is unlocked and the ignition key is not in the ignition
switch during the alarm sounding, its door is automatically
locked.
To stop the alarm: Use either of the following methods.
 Unlock the door or trunk using an ignition key or wireless
remote control or smart key system.
 Turn the ignition switch on.
Testing the system
1. Open all the windows.
2. Set the system as described above.
The doors should be locked with an ignition key, wireless
remote control or smart key system. Be sure to wait until the
indicator light starts flashing.
3. Unlock one of the doors from the inside through one of
the opened windows.
The system should activate the alarm.
4. Unlock any of the doors with an ignition key, wireless
remote control or smart key system to cancel the system.
5. Repeat this operation for the other doors, trunk and
hood.
When testing the hood, also check that the system is activated
when the battery terminal is disconnected and then
reconnected.
If the system does not work properly, have it checked by your
Lexus dealer.
NOTICE
When disconnecting the battery, be sure to cancel the
theft deterrent system. Otherwise, the system could
activate an alarm and lock the unlocked door(s)
automatically.