2005 Lexus IS300 display

AUDIO
213
SV22075a
To scan all the frequencies: Push the ªSCANº button briefly.
ªSCANº appears on the display. The radio will find the next
station up the band, stay there for a few seconds, and then
scan again. To select a station, push the ªSCANº button a
second time.
SV22076
To scan the preset stations: Push the ªSCANº button until
you hear a beep. ªSCANº appears on the display. The radio will
tune in the next preset station up the band, stay there for a few
seconds, and then move to the next preset station. To select
a station, push the ªSCANº button a second time.
04 06.30

AUDIO
214(d) RDS (Radio Data System)
SV22077
This function is operative at any time. Under the ªFMº mode,
ªRDSº appears on the display as long as the audio system
picks up RDS stations. When the audio system is in other than
ªFMº mode, or it can not pick up RDS stations, ªRDSº is off.
TYPE (Program type):
When you push the ªTYPE
º or ªTYPE  º button while
receiving an RDS station, the current program type appears on
the display.
If you push the ªTYPE º or ªTYPE  º button when ªRDSº is
off on the display, ªNO_PTYº appears.
Each time you push the ªTYPE º or ªTYPE º button, the
program type changes as in the following:
 ROCK
 EASY LIS (Easy listening)
 CLS/JAZZ (Classical music and jazz)
 R&B (Rhythm and Blues)
 INFORM (Information)
 RELIGION
 MISC
 ALERT (Emergency message)
TRAF (Traffic) function: A station that regularly
broadcasts traffic information is automatically located.
When you push the ªTRAFº button in the ªFMº mode, ªTRAF
SEEKº appears on the display and the radio will start seeking
any traffic program station.
If no traf fic program station is found, ªNO TRAF INFOº appears
on the display for a few seconds and the display returns to the
previous mode.
04 06.30

AUDIO
215
Radio text message:
SV22092b
If the radio receives a radio text message during FM reception,
ªMSGº and a text message appears on the display. After the
text message goes off, ªMSGº also goes off.
After the text message goes off from the display, pushing the
ªMSGº button during message reception shows the text
message again on the display.
In case of the text message consisting of more than 14 letters,
the display shows only the first 13 letters and the next 14
letters. If you want to show the letters unshown on the display,
push the ªMSGº button continuously. Then, move back to the
first 13 letters.
Each time you push the ªMSGº button, the screen display
cycles as follows:
Frequency
RDS station name
Text message
If no message are received, ªNO MESSAGEºappears on the
display. After this, the display returns to the previous mode.
04 06.30

AUDIO
216
Cassette tape player operation
(a) Playing a cassette tape
SV22079
When you insert a cassette tape, the exposed tape should
face to the right.
The player will automatically start when you insert a cassette
tape. At this time, ªPLAYº appears on the display.
If a metal or chrome equivalent cassette tape is put in the
cassette player, the player will automatically adapt to it and
ªMTLº appears on the display.
To stop or eject the cassette tape, push the ªEJECTº button.
Auto±reverse feature: After the cassette player reaches the
end of a tape, it automatically reverses and begins to play the
other side, regardless of whether the cassette was playing or
fast forwarding.
SV22080
If a cassette is already in the slot, push the ªTA PEº button.
DolbyB Noise Reduction* feature: If you are listening
to a tape that was recorded with
Dolby  B Noise Reduction,push the ªº button. The display will indicate that the Dolby
noise reduction system is on.
The Dolby NR mode reduces tape noise by about 10 dB. For
best sound reproduction, play your tapes with this button on or
off according to the mode used for recording the tape.
To play a tape recorded without Dolby NR, push the button
again to turn off the Dolby B NR.
*: Dolby noise reduction manufactured under license from
Dolby Laboratories Licensing Corporation. ªDOLBYº and the
double D symbol
are trademarks of Dolby Laboratories
Licensing Corporation.
04 06.30

AUDIO
217
(b) Manual program selection
SV22081
ªProgramº button:
Push the ª
º button to select the
other side of a cassette tape. The display indicates which side
is currently selected (  indicates top side,  indicates bottom
side).
ªRewindº button: Push the ª º button to rewind a tape.
ªREWº appears on the display.
To stop rewinding, push the same button or ªTAPEº button.
ªFast forwardº button: Push the ª

º button to fast forward
a cassette tape. ªFFº appears on the display.
To stop fast forwarding, push the same button or ªTAPEº
button. (c) Automatic program selection
SV22082
ªRPTº button: The repeat feature automatically replays the
current program.
Push
the ªRPTº button while the program is playing. When the
program ends, it will automatically be rewound and replayed.
Push the button again to turn off the repeat feature.
There must be at least 5 seconds of blank space between
programs for the repeat feature to work correctly.
ªSKIPº button: The skip feature allows you to fast forward
past long stretches of blank tape. This is especially useful at
the end of cassettes.
Push the ªSKIPº button. The player will automatically skip any
blank portions of 15 seconds or more and play the next
program. To cancel it, push the button once again.
04 06.30

AUDIO
218
SV22083
ªAutomatic program selectionº button: The automatic
program selection feature allows you to program your cassette
player to skip forward or backward to locate the music you want
to hear. You can skip up to nine programs at a time.
Push this button on the upper side to skip forward. ªFFº and the
number will appear on the display. Push the button until the
number you want to skip appears on the display. After that, the
player will automatically skip forward.
When the end of the tape is reached, the player automatically
reverses sides and resumes normal play. Push this button on the lower side to skip backward. Push the
button
until ªREWº and the number you want to skip appear on
the display.
 If you set ªREW 1ª, the player will rewind to the beginning
of the current program.
 When counting the number of programs you want to rewind,
remember to count the current program as well. For
example, if you want to rewind to a song that is two before
the song you are listening to, push this button until ªREW 3º appears on the display.
When the beginning of the tape is reached, the player
automatically resumes normal play.
There must be at least 5 seconds of blank space between
programs for this feature to work correctly.
ªRPTº, ªSKIPº or ªAutomatic program selectionº
features: These features may not work well with some spoken
word, live or classical recordings.
04 06.30

AUDIO
219
CD player operation
(a) Inserting or ejecting CDs
The ignition switch must be in the ªACCº or ªONº position.
Your automatic changer can store up to 6 CDs.
With six CD changer
SV22084
Setting a single CD:
1. Push the ªLOADº button briefly.
You can set a CD at the lowest empty CD number.
2. When the amber indicators of the slot start blinking, the
ªWAIT DISCº appears on the display. After the indicators
blinking amber change to the green, and the ªWAIT DISCº
changes to the ªLOAD DISCº on the display, the CD door
opens. While the CD door is open, insert only one CD. If
you need to insert the next CD, repeat the same procedure
to insert another CD.
After insertion, the set CD is automatically loaded. If the label faces down, the CD cannot be played. In this case,
ªERROR1º and CD number appear on the display.

Setting all the CDs:
1. Push the ªLOADº button until you hear a beep.
2. When the amber indicators of the slot start blinking, the
ªWAIT DISCº appears on the display. After the indicators
blinking amber change to the green, and the ªWAIT DISCº
changes to the ªLOAD DISCº on the display, the CD door
opens. While the CD door is open, insert only one CD.
After inserting the CD, the CD door closes and the ªWAIT
DISCº appears on the display again. After the ªWAIT
DISCº changes to the ªLOAD DISCº, you can insert the
next CD. Repeat this procedure until you insert all the
CDs.
To cancel the operation, push the ªLOADº or ªDISCº button.
If you do not insert the CDs within 15 seconds after pushing the
ªLOADº button and ªLOADº is displayed, the operation will be
canceled automatically.
NOTICE
Do not insert one CD stacked on top of another one or feed them in continuously, to prevent CDs from gettingstuck in the player.
04 06.30

AUDIO
220
SV22085
Ejecting a single CD alone:
1. Push the button under the ªDISC º or ªDISC  º
signal on the display to display the CD number you want
to eject.
2. Push the ªEJECTº button for the CD briefly.
At this time, the display shows ªEJECTº, and the indicators at
both ends of the slot as well as the CD number light up.
 Ejecting all the CDs:
Push the ªEJECTº button until you hear a beep.
However, if you accidentally pushed the ªEJECTº button, push
the ªDISCº or ªLOADº button to insert the CD again.
Do not push in the CD which is being ejected forcibly. With single CD player
SV22046a
When you i
nsert a CD, lightly push it in with the label side
up.
The CD player will grab the CD and slide it into place to play
it from the track 1 program.
As this is done, ªCDº appears on the display. Also, the track
number and elapsed playback time will appear on the display.
04 06.30