2005 JAGUAR S TYPE wheel

Contents
1
Subject Page
Glossary
Abbreviations 3
Introduction4
Vehicle Weights 5
Dimensions 5
Vehicle Features 6
Body
Body Structure 10
Engine Compartment 15
Trunk 16
Jacking and Towing 18
Glazing 19
Doors and Door Mirrors 21
Windshield Wipers and Washers 23
Exterior and Interior Trim 24
Seats 26
Interior Features 30
Occupant Protection
Seat Belts 32
Airbags 33
SRS Operation 35
Fuel System
Introduction 38
Evaporative Emissions System 42
Exhaust System
Introduction 44
Transmission
Introduction 45
Chassis
Introduction 46
Front Suspension 47
Rear Suspension 49
Wheels and Tyres 52
Driveline 53
Final Drive (differential) 54
Brakes 55
Power Assisted Steering 58
Steering Column 59
Climate Control
System Overview 63
continued:
JAGUARS-TYPE

JAGUARS-TYPE
4
Introduction
The Jaguar S-TYPE is an all-new, luxury sports sedan with a distinctive style, refined power, agile
handling, supple ride and luxurious comfort.
Powertrains are a V8 (AJ28) petrol engine, derived from the engines currently used in XJ and XK Series
vehicles, with a new five-speed automatic transmission or alternatively, a V6 (AJ-V6) petrol engine
coupled with either a five-speed automatic transmission or a five-speed manual transmission. The new
V6 engine and transmission units and the updated variations to the V8 engine are described in the
ÔJaguar S-TYPE Powertrain IntroductionÕ Technical Guide, which compliments this Guide.
As with current vehicles, variable rate steering control is fitted and all vehicles have ABS brakes with
traction control as standard. A new, optional feature with the Jaguar S-TYPE is Dynamic Stability Control
(DSC), yaw control, which assists the driver in maintaining directional control of the vehicle.
Unlike current vehicles, the hood is hinged at its rear with a safety catch provided at the front of the
hood. A tilt and slide sliding roof with a sunshade is an optional feature.
Both front seats have electrically operated 8-way adjustments as standard and memory equipment is
available as an option. To allow a greater load to be carried in the luggage compartment, the rear seats
can be folded forwards and are split in a 60/40 configuration.
Automatic climate control, with dual temperature control for the driver and front passenger, is a
standard feature on all vehicles. Another new item is reverse park control, a system giving the driver
audible warning of obstructions which could damage the vehicle during reversing.
A standard fit radio/cassette unit provides in-car entertainment with a CD autochanger also being
offered. Other options include a phone, navigation system, vehicle emergency monitoring system and
certain voice activated systems. Optional cruise control and audio switches are fitted to the steering
wheel. All vehicles have a trip computer system and a message center.
Security features are immobiliser and alarm. Optional features include intruder sensor and inclination
sensor. The 3 or 4 button key-ring transmitter has radio frequency operation with an encrypted rolling
code to help prevent theft of the vehicle.
Standard Corporate Protocol (SCP) is the only computer system highway for all the vehicle electronic
controls, CAN is not used.

JAGUARS-TYPEIntroduction
6
Items detailed below include features of the Jaguar S-TYPE.
N/A = Not Available; O = Optional; X = Standard A = Accessory
Middle East* includes: Abu Dhabi (GCC), Bahrain (GCC), Dubai (GCC), Kuwait (GCC), Lebanon, Oman
(GCC), Qatar (GCC), Saudi Arabia (GCC), Syria and Turkey.
GCC = Gulf Coast Countries
Russia* includes: Moscow, Belarus, Kazakhstan, Ukraine, Uzbekistan, St. Petersburg, Lithuania,
Estonia and Latvia
DYNAMICS
Feature Applicability
Traction controlXin all markets
Power steeringXin all markets
ABSXin all markets
Manual transmissionNAin USA, Canada and Mexico or 4.0 litre vehicles
Xfor entry level 3.0 litre
Ofor high specification 3.0 litre
Automatic transmissionXin all 4.0 litre vehicles, all markets
Xfor high specification 3.0 litre (but can be exchanged for
manual)
Ofor entry level 3.0 litre
DSCXin Canada (V8 only) and Mexico; Oin USA
Oin all other markets
Wheels
16 inch alloyXin USA, Canada and Mexico, V8, Ofor V6
Xall other markets for entry level 3.0 litre
16 inch dynamicXin USA, Canada and Mexico, V6, Ofor V8
Xall other markets for high level 3.0 litre and 4.0 litre
17 inch alloyNAin USA, Canada and Mexico
Xfor Japan only
Oin all other markets
Full size spare wheelXin USA, Canada and Mexico
Xin Taiwan, South Africa, Spain, Portugal (not all models)
Oin all other markets
CATS (includes 17 inch alloy wheels)Oin all markets
Sports packOin USA, Canada and Mexico
NAin all other markets
Locking wheel nutsXin Mexico; Ain USA and Canada
Vehicle Features

JAGUARS-TYPEIntroduction
9
SEATING
Feature Applicability
8-way electrical adjustmentXin all markets
Fold down rear seat (60/40)Xin all markets
Electric lumbar adjustOfor all entry level 3.0 litre in all markets
Xfor all other models/markets
Heated front seatsXin Canada and Mexico; Oin USA
NAentry level 3.0 litre in Japan, Xfor all other models in
Japan
Xin Finland, Norway, Russia, Sweden
Ofor all other models/markets
Sports seats (leather only)NAin USA, Canada and Mexico
Ofor all other models/markets
COLOR and TRIM
Feature Applicability
Seat material
clothNAin USA, Canada and Mexico
Xentry level 3.0 litre (or no cost option all other markets)
leather Xin USA, Canada and Mexico
NAin Japan
Xin all high specification 3.0 litre and all 4.0 litre markets.
Oin entry level 3.0 litre markets except: Xin entry level
3.0 litre Taiwan, Australia, New Zealand, Singapore, Hong
Kong, Thailand, China, South Korea, Malaysia, Vietnam,
Sri Lanka
Leather wheel & gear knobNAin USA, Canada and Mexico
Xin all entry level 3.0 litre all markets
Wood/leather steering wheel andXin USA, Canada and Mexico
wood gear knobXin all high level 3.0 litre and 4.0 litre, all markets
Full wood steering wheelXin USA, Canada and Mexico
NAall other markets
Floor matsXin USA, Canada and Mexico
Ofor all other markets
Metallic paintOin all markets

JAGUARS-TYPEBody
12
Front and Centre Floor Pan
The floor pan is a three-piece construction with
handed dash panels, welded front suspension
housing, an integral centre bearing panel for the
driveshaft and a large under-tunnel heatshield.
Rear Floor Pan
Multi-piece floor pan design, the rear tub is
designed to accept either a full size or space saver
spare wheel and the luggage compartment has
four tie-down luggage loops. Two plastic covers
are located under the rear seat and these give
easy access to the fuel tank mounted components.
A plastic battery tray is located below the luggage
load floor.
Roof
Provision has been made for roof rack fixings and
the roof has reinforcement for vehicles fitted with
a the sliding roof.
Sliding Roof
The sliding roof has an exterior encapsulated glass
roof panel, with sliding sunshade, and has tilt and
slide operation. The sunshade is available in two
colours to match the headlining. Note that the
sunshade cannot be closed if the sliding roof is in
the fully open position or has been partly closed
from the fully open position; this is because the
J.501.1775
SLIDING ROOF MOTOR ASSEMBLYpull-cup is hidden. To allow access to the
sunshade pull-cup, the sliding roof must be fully
closed. Special screws are used in some locations.
When replacements are required these screws are
supplied in packs, do not use any other screws
than those supplied. Low battery voltage may
prevent operation of the sliding roof although the
relays may be heard operating. The sliding roof
cannot be fitted as a retrofit item.
Body Side and Quarter
The vehicle has one piece body sides and one
piece door opening panels, with full height ÔAÕ
post and ÔB-CÕ post reinforcement. The jacking
reinforcement joins the door opening panel to
rear quarter inner reinforcement panel. Large
vacuum-formed wheel arch liners are fitted front
and rear. A sill appliquŽ protects the BIW
sheetmetal from stone damage and an anti-chip
coating is applied to the sills
Closures
One piece door inner and outer pressing with side
impact beams. One piece front and rear door
hinge reinforcement panels.
Door sealing is a triple seal system:
¥ primary seals - single sponge profile with part
dense rubber foot, ÔCÕ-channel mounted on
the upper door and peg mounted below the
waist.
¥ secondary seals - body side flange mounted
carrier with sponge and dense rubber,
colour-keyed trim flap
¥ margin sealing - flange mounted roof
rail/gutter seal which closes off the upper
door opening line above the waist and
terminates with a shaped moulding at each
end.
A variety of different profiles are peg mounted to
the ÔAÕ and ÔCÕ pillar periphery below the waist
and also door bottoms. A separate ÔBÕ pillar seal is
riveted as part of the ÔBÕ pillar appliquŽ.
Sliding Roof Control
Module (SRCM)

JAGUARS-TYPEBody
17
JOL.080
SPARE WHEEL AND JACKING EQUIPMENT
Spare Wheel and Jacking Equipment
The spare wheel and jacking equipment are
located in the luggage compartment floor pan.
The floor carpet folds forwards to access the
spare wheel, towing eye and jack.
Towing Eye
JOL.080

JAGUARS-TYPEBody
23
Windshield Wipers and Washers
The windshield wiper linkages and motor are a
combined unit with the operating logic integrated
into the GECM. The wiper system has two wiper
arms/blades which are handed for LHD or RHD.
Wipers are twin speed with variable six speed
intermittent operation and, optionally, moisture
sensitive operation.
Wiper arms do not lock away from the glass, they
must be held away from the windshield when
cleaning the glass. A special tool (501065) is
required to remove the wiper arms from the body.
Windshield washer jets are hood mounted. Two
sizes of washer reservoir are available, one for
windshield wash only, 4.4 litres, and one for
windshield wash and headlamp power wash,
6.6 litres. The reservoir is mounted forward of the
RH front wheel.
Headlamp power wash jets extend by water
pressure and retract by spring pressure.
A spoiler is fitted to the driverÕs wiper blade for
UK and European markets only.
D.501.1778
WINDSHIELD WIPER ASSEMBLY

JAGUARS-TYPEBody
24
Exterior and Interior Trim
J.501.1784
INTERIOR CARPET
J.501.1784
No coach line will be applied. The optional
equipment headlamp power washers are body
coloured as are the door handles and body side
protective mouldings. The vehicle has a chromed
radiator grille surround with gunmetal vertical
grille vanes.
Front license plate plinth when required is
mounted to the front bumper and the rear license
plate is mounted directly to the trunk drop panel
The A, B/C upper and D/E post trim are structural
parts designed to absorb energy during occupant
head impact. These parts must be replaced
following accident damage if impacted. Damage
may not be evident unless the parts are removed
and examined for damage such as cracking, stress
whitening or rib crushing. The headlining also
contains energy absorbing elements which need to
be replaced in the event of accident damage. The
headlining must be removed to inspect the foam
parts and if any have come loose or been
damaged through cracking or crushing then the
complete headlining must be replaced.
Mirrors
The standard fit manual dip mirror has a double
ball joint for adjustment. Electrochromic and rain
sensing versions may be fitted. North American
vehicles can also have an optional compass fittedwithin the mirror head. The mirror mounting is
supplied bonded to the windshield.
Carpets
The interior carpet is a complete, one-piece design
Trunk carpeting comprises
¥ A folding floor panel.
¥ Two styles of trunk LH carpet, one for
Navigation CD with 4 fixings and one without
CD with 3 fixings. When the Navigation CD
player is fitted it has a separate carpet trim
cover.
¥ A RH side trim carpet with 3 fixings.
¥ A single piece trunk lid liner with 11 fixings.
When a space saver wheel is stowed in the trunk,
an under floor stowage tray is provided under the
folding floor carpet.