2005 JAGUAR S TYPE headrest

Refer to the front of this book for detailed information and illustrations regarding the location and identification of harnesses, relays, fuses, grounds,
control modules and control module pins.
NOTE: The values listed are approximately those that can be expected at the control module connector pins with all circuit conn
ections made and all
components connected and fitted. The following abbreviations are used to represent values for Control Module Pin-Out data
I Input
O Output
B+ Battery Voltage PG Power Ground
SS Sensor / Signal Supply V
SG Sensor / Signal GroundC CAN Network
S SCP Network
D2 D2B Network D Serial and Encoded Data
V Voltage (DC)
PWM Pulse Width Modulated
CAUTION: The information on this data page is furnished to ai d the user in understanding circuit operation. THIS INFORMATION SH OULD BE USED FOR
REFERENCE ONLY.DATE OF ISSUE: May 2004
Fig. 11.1
FOR CONTROL MODULE PIN-OUT INFORMATION, UNFOLD PAGE TO LEFT. COMPONENTS
Component Connector(s) Connector Description LocationDOOR SWITCH PACK – DRIVER DD2 26-WAY / YELLOW DRIVER DOOR ARM REST
DRIVER DOOR MODULE CA85 12-WAY / BLACK DRIVER DOOR
DD4 26-WAY / NATURAL
DT2 20-WAY / BLACK
DRIVER SEAT MODULE DM33 26-WAY / BLACK UNDER DRIVER SEAT
DM34 22-WAY / BLACK
DM35 6-WAY / BLACK
DM36 4-WAY / BLACK
DM37 4-WAY / BLACK
DM38 6-WAY / BLACK
LUMBAR PUMP – DRIVER DL4 3-WAY / BLACK LOWER SEAT BACK
SEAT MOTORS AND POSITION SENSORS – DRIVER DM25 4-WAY / BLACK DRIVER SEAT
DM26 4-WAY / BLACK
DM27 4-WAY / BLACK
DM28 4-WAY / BLACK
DM29 4-WAY / BLACK
DM31 4-WAY / BLACK
SEAT SWITCH PACK – DRIVER DM7 12-WAY / BLACK DRIVER SEAT DM43 14-WAY / BLACKHARNESS IN-LINE CONNECTORS
Connector Connector Description / Location LocationDD8 16-WAY / BLUE / CABIN HARNESS TO DRIVER DOOR HARNESS DRIVER DOOR
DL2 6-WAY / BLACK / DRIVER SEAT IN-LINE CONNECTOR DRIVER SEAT BACK REST
DM22 4-WAY / GREY / CABIN HARNESS TO DRIVER SEAT HARNESS UNDER DRIVER SEAT
DM23 20-WAY / BLACK / CABIN HARNESS TO DRIVER SEAT HARNESS UNDER DRIVER SEATGROUNDS
Ground LocationCA30 LH LOWER ‘A’ POST, ADJACENT TO THE FRONT ELECTRONIC MODULE (REARWARD OF FH77)
CA50 RH LOWER ‘A’ POST, BELOW PRIMARY JUNCTION FUSE BOX
CA141 UNDER LH FRONT SEAT
CA154 UNDER RH FRONT SEAT
NOTE: Refer to the Appendix at the rear of this book for Network Messages. Driver Door ModulePin Description and CharacteristicS CA85–3 SCP +
S CA85–4 SCP –
PG CA85–8 POWER GROUND: GROUND
B+ CA85–11 BATTERY POWER SUPPLY: B+
O DD4–7 MEMORY SET INDICATOR: TO ACTIVATE, DDM SWITCHES CIRCUIT TO B+
I DD4–10 MEMORY 1: GROUND WHEN SELECTED
I DD4–11 MEMORY 2: GROUND WHEN SELECTED
I DD4–25 MEMORY SET: GROUND WHEN SELECTEDDriver Seat ModulePin Description and CharacteristicI DM33–7 SEAT CUSHION FRONT POSITION SENSOR SIGNAL: 5 V PULSED SIGNAL
I DM33–8 SEAT HEIGHT POSITION SENSOR SIGNAL: 5 V PULSED SIGNAL
I DM33–9 HEADREST POSITION SENSOR SIGNAL: 5 V PULSED SIGNAL
I DM33–10 SEAT BACK RECLINE POSITION SENSOR SIGNAL: 5 V PULSED SIGNAL
SG DM33–11 SIGNAL GROUND: GROUND
B+ DM33–13 BATTERY POWER SUPPLY: LOGIC: B+
I DM33–22 SEAT POSITION SENSOR SIGNAL: 5 V PULSED SIGNAL
SG DM33–25 SIGNAL GROUND: GROUND
SG DM33–26 LOGIC GROUND: GROUND
S DM34–1 SCP +
I DM34–4 SEAT CUSHION FRONT RAISE REQUEST: ACTIVE = B+
I DM34–5 SEAT CUSHION FRONT LOWER REQUEST: ACTIVE = B+
I DM34–10 SEAT BACK RECLINE REARWARD REQUEST: ACTIVE = B+
I DM34–11 SEAT BACK RECLINE FORWARD REQUEST: ACTIVE = B+
S DM34–12 SCP –
I DM34–17 SEAT RAISE REQUEST: ACTIVE = B+
I DM34–18 SEAT LOWER REQUEST: ACTIVE = B+
I DM34–19 SEAT FORWARD REQUEST: ACTIVE = B+
I DM34–20 SEAT REARWARD REQUEST: ACTIVE = B+
O DM35–1 SEAT HEIGHT MOTOR DRIVE – RAISE: TO ACTIVATE, DSM SWITCHES CIRCUIT TO B+
O DM35–2 SEAT HEIGHT MOTOR DRIVE – LOWER: TO ACTIVATE, DSM SWITCHES CIRCUIT TO B+
PG DM35–5 POWER GROUND: GROUND
B+ DM35–6 BATTERY POWER SUPPLY: B+
O DM36–1 SEAT POSITION MOTOR DRIVE – FORWARD: TO ACTIVATE, DSM SWITCHES CIRCUIT TO B+
O DM36–2 SEAT POSITION MOTOR DRIVE – REARWARD: TO ACTIVATE, DSM SWITCHES CIRCUIT TO B+
O DM37–3 SEAT BACK RECLINE MOTOR DRIVE – REARWARD: TO ACTIVATE, DSM SWITCHES CIRCUIT TO B+
O DM37–4 SEAT BACK RECLINE MOTOR DRIVE – FORWARD: TO ACTIVATE, DSM SWITCHES CIRCUIT TO B+
PG DM38–1 POWER GROUND: GROUND
B+ DM38–2 BATTERY POWER SUPPLY: B+
O DM38–5 SEAT CUSHION FRONT MOTOR DRIVE – RAISE: TO ACTIVATE, DSM SWITCHES CIRCUIT TO B+
O DM38–6 SEAT CUSHION FRONT MOTOR DRIVE – LOWER: TO ACTIVATE, DSM SWITCHES CIRCUIT TO B+

Refer to the front of this book for detailed information and illustrations regarding the location and identification of harnesses, relays, fuses, grounds,
control modules and control module pins.
NOTE: The values listed are approximately those that can be expected at the control module connector pins with all circuit conn
ections made and all
components connected and fitted. The following abbreviations are used to represent values for Control Module Pin-Out data
I Input
O Output
B+ Battery Voltage PG Power Ground
SS Sensor / Signal Supply V
SG Sensor / Signal GroundC CAN Network
S SCP Network
D2 D2B Network D Serial and Encoded Data
V Voltage (DC)
PWM Pulse Width Modulated
CAUTION: The information on this data page is furnished to ai d the user in understanding circuit operation. THIS INFORMATION SH OULD BE USED FOR
REFERENCE ONLY.DATE OF ISSUE: May 2004
Fig. 11.2
FOR CONTROL MODULE PIN-OUT INFORMATION, UNFOLD PAGE TO LEFT. COMPONENTS
Component Connector(s) Connector Description LocationDRIVER SEAT MODULE DM33 26-WAY / BLACK UNDER DRIVER SEAT
DM34 22-WAY / BLACK
DM35 6-WAY / BLACK
DM36 4-WAY / BLACK
DM37 4-WAY / BLACK
DM38 6-WAY / BLACK
LUMBAR PUMP – DRIVER (16-WAY) DL3 2-WAY / BLACK LOWER SEAT BACK
LUMBAR SOLENOIDS – DRIVER DL1 6-WAY / BLACK UPPER SEAT BACK
SEAT MOTORS AND POSITION SENSORS – DRIVER DM25 4-WAY / BLACK DRIVER SEAT DM26 4-WAY / BLACK
DM27 4-WAY / BLACK
DM28 4-WAY / BLACK
DM29 4-WAY / BLACK
DM31 4-WAY / BLACK
SEAT SWITCH PACK – DRIVER DM7 12-WAY / BLACK DRIVER SEAT DM43 14-WAY / BLACKHARNESS IN-LINE CONNECTORS
Connector Connector Description / Location LocationDL2 6-WAY / BLACK / DRIVER SEAT IN-LINE CONNECTOR DRIVER SEAT BACK REST
DM22 4-WAY / GREY / CABIN HARNESS TO DRIVER SEAT HARNESS UNDER DRIVER SEAT
DM23 20-WAY / BLACK / CABIN HARNESS TO DRIVER SEAT HARNESS UNDER DRIVER SEATGROUNDS
Ground LocationCA141 UNDER LH FRONT SEAT
CA154 UNDER RH FRONT SEAT
NOTE: Refer to the Appendix at the rear of this book for Network Messages. Driver Seat ModulePin Description and CharacteristicI DM33–7 SEAT CUSHION FRONT POSITION SENSOR SIGNAL: 5 V PULSED SIGNAL
I DM33–8 SEAT HEIGHT POSITION SENSOR SIGNAL: 5 V PULSED SIGNAL
I DM33–9 HEADREST POSITION SENSOR SIGNAL: 5 V PULSED SIGNAL
I DM33–10 SEAT BACK RECLINE POSITION SENSOR SIGNAL: 5 V PULSED SIGNAL
SG DM33–11 SIGNAL GROUND: GROUND
SG DM33–12 SIGNAL GROUND: GROUND
B+ DM33–13 BATTERY POWER SUPPLY: LOGIC: B+
I DM33–22 SEAT POSITION SENSOR SIGNAL: 5 V PULSED SIGNAL
I DM33–23 SEAT CUSHION EXTEND POSITION SENSOR SIGNAL: 5 V PULSED SIGNAL
SG DM33–25 SIGNAL GROUND: GROUND
SG DM33–26 LOGIC GROUND: GROUND
S DM34–1 SCP +
I DM34–4 SEAT CUSHION FRONT RAISE REQUEST: ACTIVE = B+
I DM34–5 SEAT CUSHION FRONT LOWER REQUEST: ACTIVE = B+
I DM34–10 SEAT BACK RECLINE REARWARD REQUEST: ACTIVE = B+
I DM34–11 SEAT BACK RECLINE FORWARD REQUEST: ACTIVE = B+
S DM34–12 SCP –
I DM34–15 HEAD REST RAISE REQUEST: ACTIVE = B+
I DM34–16 HEADREST LOWER REQUEST: ACTIVE = B+
I DM34–17 SEAT RAISE REQUEST: ACTIVE = B+
I DM34–18 SEAT LOWER REQUEST: ACTIVE = B+
I DM34–19 SEAT FORWARD REQUEST: ACTIVE = B+
I DM34–20 SEAT REARWARD REQUEST: ACTIVE = B+
I DM34–21 SEAT CUSHION EXTEND REARWARD REQUEST: ACTIVE = B+
I DM34–22 SEAT CUSHION EXTEND FORWARD REQUEST: ACTIVE = B+
O DM35–1 SEAT HEIGHT MOTOR DRIVE – RAISE: TO ACTIVATE, DSM SWITCHES CIRCUIT TO B+
O DM35–2 SEAT HEIGHT MOTOR DRIVE – LOWER: TO ACTIVATE, DSM SWITCHES CIRCUIT TO B+
PG DM35–5 POWER GROUND: GROUND
B+ DM35–6 BATTERY POWER SUPPLY: B+
O DM36–1 SEAT POSITION MOTOR DRIVE – FORWARD: TO ACTIVATE, DSM SWITCHES CIRCUIT TO B+
O DM36–2 SEAT POSITION MOTOR DRIVE – REARWARD: TO ACTIVATE, DSM SWITCHES CIRCUIT TO B+
O DM36–3 SEAT CUSHION EXTEND MOTOR DRIVE – REARWARD: TO ACTIVATE, DSM SWITCHES CIRCUIT TO B+
O DM36–4 SEAT CUSHION EXTEND MOTOR DRIVE – FORWARD: TO ACTIVATE, DSM SWITCHES CIRCUIT TO B+
O DM37–3 SEAT BACK RECLINE MOTOR DRIVE – REARWARD: TO ACTIVATE, DSM SWITCHES CIRCUIT TO B+
O DM37–4 SEAT BACK RECLINE MOTOR DRIVE – FORWARD: TO ACTIVATE, DSM SWITCHES CIRCUIT TO B+
PG DM38–1 POWER GROUND: GROUND
B+ DM38–2 BATTERY POWER SUPPLY: B+
O DM38–3 HEADREST POSITION MOTOR DRIVE – RAISE: TO ACTIVATE, DSM SWITCHES CIRCUIT TO B+
O DM38–4 HEADREST POSITION MOTOR DRIVE – LOWER: TO ACTIVATE, DSM SWITCHES CIRCUIT TO B+
O DM38–5 SEAT CUSHION FRONT MOTOR DRIVE – RAISE: TO ACTIVATE, DSM SWITCHES CIRCUIT TO B+
O DM38–6 SEAT CUSHION FRONT MOTOR DRIVE – LOWER: TO ACTIVATE, DSM SWITCHES CIRCUIT TO B+