2005 INFINITI FX35 P0507

INDEX FOR DTC EC-709
[VK45DE]
C
D E
F
G H
I
J
K L
M A
EC
Revision: 2005 July 2005 FXP0500 0500
VEH SPEED SEN/CIRC*6EC-1123
P0506 0506 ISC SYSTEM EC-1125
P0507 0507 ISC SYSTEMEC-1127
P0550 0550 PW ST P SEN/CIRCEC-1129
P0605 0605 ECMEC-1134
P0700 0700 TCM AT- 11 3
P0705 0705 PNP SW/CIRCAT- 11 4
P0710 0710 ATF TEMP SEN/CIRCAT-136
P0720 0720
VEH SPD SEN/CIR AT*6AT- 11 8
P0740 0740 TCC SOLENOID/CIRC AT-125
P0744 0744 A/T TCC S/V FNCTNAT-127
P0745 0745 L/PRESS SOL/CIRCAT-129
P1065 1065 ECM BACK UP/CIRCUITEC-1137
P 1111 1111 I N T / V T I M V / C I R - B 1EC-1141
P1121 1121 ETC ACTR EC-1148
P1122 1122 ETC FUNCTION/CIRCEC-1150
P1124 1124 ETC MOT PWREC-1156
P1126 1126 ETC MOT PWREC-1156
P1128 1128 ETC MOTEC-1161
P1136 1136 INT/V TIM V/CIR-B2EC-1141
P1140 1140 INTK TIM S/CIRC-B1EC-1166
P1143 1143 HO2S1 (B1)EC-1174
P1144 1144 HO2S1 (B1)EC-1180
P1145 1145 INTK TIM S/CIRC-B2EC-1166
P1146 1146 HO2S2 (B1)EC-1187
P1147 1147 HO2S2 (B1)EC-1198
P1148 1148 CLOSED LOOP-B1EC-1209
P1163 1163 HO2S1 (B2) EC-1174
P1164 1164 HO2S1 (B2)EC-1180
P1166 1166 HO2S2 (B2)EC-1187
P1167 1167 HO2S2 (B2)EC-1198
P1168 1168 CLOSED LOOP-B2EC-1209
P1211 1211 TCS C/U FUNCTN EC-1211
P1212 1212 TCS/CIRCEC-1212
P1217 1217 ENG OVER TEMPEC-1213
P1225 1225 CTP LEARNINGEC-1225
P1226 1226 CTP LEARNINGEC-1227
P1229 1229 SENSOR POWER/CIRCEC-1229
P1444 1444 PURG VOLUME CONT/VEC-1233
P1446 1446 VENT CONTROL VALVEEC-1241
P1564 1564 ASCD SW EC-1247 (Models with ICC)
EC-1254
(Models with ASCD)
DTC*
1
Items
(CONSULT-II screen terms) Reference page
CONSULT-II
GST*
2ECM*3

INDEX FOR DTC EC-713
[VK45DE]
C
D E
F
G H
I
J
K L
M A
EC
Revision: 2005 July 2005 FXHO2S2 (B1) P0138 0138 EC-966
HO2S2 (B1) P0139 0139EC-975
HO2S2 (B1) P1146 1146EC-1187
HO2S2 (B1) P1147 1147EC-1198
HO2S2 (B2) P0158 0158 EC-966
HO2S2 (B2) P0159 0159EC-975
HO2S2 (B2) P1166 1166EC-1187
HO2S2 (B2) P1167 1167EC-1198
HO2S2 HTR (B1) P0037 0037 EC-885
HO2S2 HTR (B1) P0038 0038EC-885
HO2S2 HTR (B2) P0057 0057EC-885
HO2S2 HTR (B2) P0058 0058EC-885
I/C SOLENOID/CIRC P1752 1752 AT-150
I/C SOLENOID FNCTN P1754 1754AT-152
IAT SEN/CIRCUIT P0112 0112EC-909
IAT SEN/CIRCUIT P0113 0113EC-909
IAT SENSOR P0127 0127EC-930
INT/V TIM CONT-B1 P0011 0011EC-865
INT/V TIM CONT-B2 P0021 0021EC-865
I N T / V T I M V / C I R - B 1 P 1111 1111EC-1141
INT/V TIM V/CIR-B2 P1136 1136EC-1141
INTK TIM S/CIRC-B1 P1140 1140EC-1166
INTK TIM S/CIRC-B2 P1145 1145EC-1166
ISC SYSTEM P0506 0506EC-1125
ISC SYSTEM P0507 0507EC-1127
KNOCK SEN/CIRC-B1 P0327 0327EC-1031
KNOCK SEN/CIRC-B1 P0328 0328EC-1031
KNOCK SEN/CIRC-B2 P0332 0332EC-1031
KNOCK SEN/CIRC-B2 P0333 0333EC-1031
L/PRESS SOL/CIRC P0745 0745 AT-129
LC/B SOLENOID FNCT P1774 1774AT-168
LC/B SOLENOID/CIRC P1772 1772AT-166
MAF SEN/CIRCUIT P0101 0101EC-893
MAF SEN/CIRCUIT P0102 0102EC-902
MAF SEN/CIRCUIT P0103 0103EC-902
MULTI CYL MISFIRE P0300 0300EC-1022
NATS MALFUNCTION P1610 - P1615 1610 - 1615 EC-744
NO DTC IS DETECTED.
FURTHER TESTING
MAY BE REQUIRED. P0000 0000 —
NO DTC IS DETECTED.
FURTHER TESTING
MAY BE REQUIRED. No DTC
Flashing*
4EC-761
P-N POS SW/CIRCUIT P1706 1706 EC-1283
Items
(CONSULT-II screen terms) DTC*
1
Reference page
CONSULT-II
GST*
2ECM*3

EC-748
[VK45DE]
ON BOARD DIAGNOSTIC (OBD) SYSTEM
Revision: 2005 July 2005 FX
ISC SYSTEM P0507 0507 — — 2 ×EC-1127
PW ST P SEN/CIRC P0550 0550 — — 2 — EC-1129
ECM P0605 0605 — — 1 or 2× or — EC-1134
TCM P0700 0700 — — 1 ×AT- 11 3
PNP SW/CIRC P0705 0705 — — 2 ×AT- 11 4
ATF TEMP SEN/CIRC P0710 0710 — — 2 ×AT- 1 3 6
VEH SPD SEN/CIR AT*7P0720 0720 — — 2 ×AT- 11 8
TCC SOLENOID/CIRC P0740 0740 — — 2 ×AT- 1 2 5
A/T TCC S/V FNCTN P0744 0744 — — 2 ×AT- 1 2 7
L/PRESS SOL/CIRC P0745 0745 — — 2 ×AT- 1 2 9
ECM BACK UP/CIRC P1065 1065 — — 2 ×EC-1137
I N T / V T I M V / C I R - B 1 P 1111 1111 — — 2 ×EC-1141
ETC ACTR P1121 1121 — — 1 ×EC-1148
ETC FUNCTION/CIRC P1122 1122 — — 1 ×EC-1150
ETC MOT PWR P1124 1124 — — 1 ×EC-1156
ETC MOT PWR P1126 1126 — — 1 ×EC-1156
ETC MOT P1128 1128 — — 1 ×EC-1161
INT/V TIM V/CIR-B2 P1136 1136 — — 2 ×EC-1141
INTK TIM S/CIRC-B1 P1140 1140 — — 2 ×EC-1166
HO2S1 (B1) P1143 1143 ××2×EC-1174
HO2S1 (B1) P1144 1144 ××2×EC-1180
INTK TIM S/CIRC-B2 P1145 1145 — — 2 ×EC-1166
HO2S2 (B1) P1146 1146 ××2×EC-1187
HO2S2 (B1) P1147 1147 ××2×EC-1198
CLOSED LOOP-B1 P1148 1148 — — 1 ×EC-1209
HO2S1 (B2) P1163 1163 ××2×EC-1174
HO2S1 (B2) P1164 1164 ××2×EC-1180
HO2S2 (B2) P1166 1166 ××2×EC-1187
HO2S2 (B2) P1167 1167 ××2×EC-1198
CLOSED LOOP-B2 P1168 1168 — — 1 ×EC-1209
TCS C/U FUNCTN P1211 1211 — — 2 — EC-1211
TCS/CIRC P1212 1212 — — 2 —EC-1212
ENG OVER TEMP P1217 1217 — — 1×EC-1213
CTP LEARNING P1225 1225 — — 2 — EC-1225
CTP LEARNING P1226 1226 — — 2 —EC-1227
SENSOR POWER/CIRC P1229 1229 — — 1×EC-1229
PURG VOLUME CONT/V P1444 1444 — — 2 ×EC-1233
VENT CONTROL VALVE P1446 1446 — — 2 ×EC-1241
ASCD SW P1564 1564 — — 1 — EC-1247

(Models
with ICC) EC-1254

(Models
with ASCD)
Items
(CONSULT-II screen terms) DTC*
1
SRT code
Test value/
Te s t l i m i t
(GST only) Trip MIL
Reference
page
CONSULT-II
GST*
2ECM*3

EC-798
[VK45DE]
TROUBLE DIAGNOSIS
Revision: 2005 July 2005 FX
2
P0031P0032 P0051 P0052 Heated oxygen sensor 1 heater

P0037 P0038 P0057 P0058 Heated oxygen sensor 2 heater

P0132 P0133 P0134 P0152 P0153 P0154 P1143 P1144 P1163 P1164 Heated oxygen sensor 1

P0138 P0139 P0158 P0159 P1146 P1147 P1166 P1167 Heated oxygen sensor 2

P0441 EVAP control system purge flow monitoring

P0444 P0445 P1444 EVAP canister purge volume control solenoid valve

P0447 P1446 EVAP canister vent control valve

P0451 P0452 P0453 EVAP control system pressure sensor

P0550 Power steering pressure sensor

P0710 P0720 P0740 P0744 P0745 P1716 P1720 P1730 P1752 P1754 P1757 P1759 P1762 P1764 P1767 P1769
P1772 P1774 A/T related sensors, solenoid valves and switches

P1065 ECM power supply

P 1111 P 11 3 6 I n ta k e v a l v e t i m i n g c o n t r o l s o l e n o i d v a l v e

P1122 Electric throttle control function

P1124 P1126 P1128 Electric throttle control actuator

P1140 P1145 Intake valve timing control position sensor

P1217 Engine over temperature (OVERHEAT)

P1805 Brake switch
3

P0011 P0021 Intake valve timing control

P0171 P0172 P0174 P0175 Fuel injection system function

P0300 - P0308 Misfire

P0420 P0430 Three way catalyst function

P0442 P0456 EVAP control system (SMALL LEAK, VERY SMALL LEAK)

P0455 EVAP control system (GROSS LEAK)

P0506 P0507 Idle speed control system

P1121 Electric throttle control actuator

P1148 P1168 Closed loop control

P1211 TCS control unit

P1212 TCS communication line

P1564 ICC steering switch/ASCD steering switch

P1568 ICC command value

P1572 ICC brake switch/ASCD brake switch

P1574 ICC vehicle speed sensor/ASCD vehicle speed sensor

P1780 Shift change signal

P1800 VIAS control solenoid valve
Priority Detected items (DTC)

DTC P0507 ISC SYSTEM EC-1127
[VK45DE]
C
D E
F
G H
I
J
K L
M A
EC
Revision: 2005 July 2005 FX
DTC P0507 ISC SYSTEMPFP:23781
DescriptionABS007PS
NOTE:
If DTC P0507 is displayed with other DTC, first perform the trouble diagnosis for the other DTC.
The ECM controls the engine idle speed to a specified level through the fine adjustment of the air, which is let
into the intake manifold, by operating the electric throttle control actuator. The operating of the throttle valve is
varied to allow for optimum control of the engine idling speed. The crankshaft position sensor (POS) detects
the actual engine speed and sends a signal to the ECM.
The ECM controls the electric throttle control actuator so that the engine speed coincides with the target value
memorized in the ECM. The target engine speed is the lowest speed at which the engine can operate steadily.
The optimum value stored in the ECM is determined by taking into consideration various engine conditions,
such as during warming up, deceleration, and engine load (air conditioner, power steering and cooling fan
operation, etc.).
On Board Diagnosis LogicABS007PT
DTC Confirmation ProcedureABS007PU
NOTE:

If DTC Confirmation Procedure has been previously conducted, always turn ignition switch OFF and wait
at least 10 seconds before conducting the next test.

If the target idle speed is out of the specified value, perform EC-787, "Idle Air Volume Learning" ,
before conducting DTC Confirmation Procedure. For the target idle speed, refer to the EC-1395,
"SERVICE DATA AND SPECIFICATIONS (SDS)" .
TESTING CONDITION:

Before performing the following procedure, confirm that battery voltage is more than 11V at idle.

Always perform the test at a temperature above −10 °C (14 °F).
WITH CONSULT-II
1. Open engine hood.
2. Start engine and warm it up to normal operating temperature.
3. Turn ignition switch OFF and wait at least 10 seconds.
4. Turn ignition switch ON again and select “DATA MONITOR” mode with CONSULT-II.
5. Start engine and run it for at least 1 minute at idle speed.
6. If 1st trip DTC is detected, go to EC-1128, "
Diagnostic Proce-
dure" .
WITH GST
Follow the procedure “WITH CONSULT-II” above.
DTC No. Trouble diagnosis name DTC detecting condition Possible cause
P0507
0507 Idle speed control sys-
tem RPM higher than
expected The idle speed is more than the target idle
speed by 200 rpm or more.

Electric throttle control actuator

Intake air leak

PCV system
SEF174Y

EC-1128
[VK45DE]
DTC P0507 ISC SYSTEM
Revision: 2005 July 2005 FX
Diagnostic ProcedureABS007PV
1. CHECK PCV HOSE CONNECTION
Confirm that PCV hose is connected correctly.
OK or NG
OK >> GO TO 2.
NG >> Repair or replace.
2. CHECK INTAKE AIR LEAK
1. Start engine and let it idle.
2. Listen for an intake air leak after the mass air flow sensor.
OK or NG
OK >> GO TO 3.
NG >> Discover air leak location and repair.
3. REPLACE ECM
1. Stop engine.
2. Replace ECM.
3. Perform initialization of IVIS (NATS) system and registration of all IVIS (NATS) ignition key IDs. Refer to BL-215, "
ECM Re-Communicating Function" .
4. Perform EC-786, "
VIN Registration" .
5. Perform EC-786, "
Accelerator Pedal Released Position Learning" .
6. Perform EC-786, "
Throttle Valve Closed Position Learning" .
7. Perform EC-787, "
Idle Air Volume Learning" .
>> INSPECTION END