2005 CITROEN C6 steering

Downloaded from www.Manualslib.com manuals search engine 168
AXLES
SUSPENSION
STEERING
Remove:
- The exhaust line (3).
- The tool [6].
Couple the two supply pipes (5)on the distributor valve.
Refit:
- The bracket (7).
- The screw (4), tighten to 0,8 ± 0,1 m.daN.
Retighten the union (6)on the power steering ram; tighten to 1,4 ± 0,35 m.daN.
Refit the exhaust line (3).
Pinch the pipe at "a", using tool [2].
Remove:
- The assembly [3].
- The union [5]on the pipe (2).
- The union [4]on the steering assistance pump.
Couple the pipe (2), using tool [1].
Tighten the pipe (2)to 2 ± 0,2 m.daN.
Refit the bracket (1).
Bleed the hydraulic steering assistance circuit (see corresponding operation).
Top up the level of the LDS fluid (see procedure: drain-fill-bleed the suspension circuit).
B1JP08WDB3EP185D
CHECKING THE STEERING ASSISTANCE PRESSURE (ES9A ENGINE)
Angl-C6-page121-169-2005 4/02/05 17:31 Page 168

Downloaded from www.Manualslib.com manuals search engine 169
AXLES
SUSPENSION
STEERING
Precautions to be taken.
Proceed with care so as to prevent any entry of polluting particles.
IMPERATIVE: Respect the safety and cleanliness requirements.
IMPERATIVE: Fill the LDS fluid reservoir with new fluid: TOTAL LDS.
Bleeding.
Check the level and top up the LDSfluid (see procedure: drain-fill-bleed the suspension circuit).
Apply a pressure of 0.5 barin the LDSfluid reservoir (using tool FACOM 920).
Start the engine.
Wait for the vehicle height to stabilise.
Move the steering in each direction, from lock to lock.
Stop the engine.
Check the level and top up the LDSfluid (see procedure: drain-fill-bleed the suspension circuit).
BLEEDING THE HYDRAULIC STEERING ASSISTANCE CIRCUIT
Angl-C6-page121-169-2005 4/02/05 17:31 Page 169

Downloaded from www.Manualslib.com manuals search engine 206
AIR
CONDITIONING
SPECIAL FEATURES: AIR CONDITIONING SYSTEM (R 134.a)
Pollen filter
The pollen filter is located on the driver's side under the dashboard to the
right of the steering column.IMPERATIVE: Respect the safety and cleanliness requirements.
Removing.
Remove the trim (1)under the dashboard (driver's side).
Release the tab at "b".
Tilt, lift and remove the cover (2).
Remove the pollen filter (3).
NOTE:If the tab "b"is damaged, position a screw for soft materials at "a".
Refitting.
Refit the various components in reverse order to removal.
C5FP0S1CC5HP1BDD
Angl-C6-page203-217-2005 4/02/05 17:40 Page 206