2005 Citroen C4 height

Downloaded from www.Manualslib.com manuals search engine 390
AXLES
SUSPENSION
STEERING
A> B =Negative figure: – = TOE-OUT A < B = Positive figure: + = TOE-INNOTE
AXLE GEOMETRY
Measurements at reference height (compress the suspension to obtain the calculated values).
Vehicles all engine versions (except CRD (*))
Front axle Rear axle
Vehicle Tracking CastorPivot angleCamber Tracking Camber
Adjustable Yes No
ALL TYPES0 ± 1 mm4,8 ± 1,3 mm
- 0°09’ à + 0°09’3° ± 18’ 10°43’ ± 30’ 0° ± 30’
- 0°43’ ± 0°12’- 1°13’ ± 18’
XSARA PICASSO
B3CP02UC
Angl.-t2-page361-397-2005 9/01/06 10:22 Page 390

Downloaded from www.Manualslib.com manuals search engine 391
AXLES
SUSPENSION
STEERING
AXLE GEOMETRY
(*) = Difficult road conditions.
Compress the suspension to obtain the calculated values.
NOTE: The difference in height between the two sides should be less than10 mm. Measure the radius of the rear wheel: R2.
Calculate the dimensionH2. Measure the radius of the front wheel: R1.
Calculate the dimension H1 orH1’.
Checks at reference height (the reference height of the vehicle is set as per the table below).
B3CP05BCB3CP05AC
XSARA PICASSO
Front axleRear axle
Front axle
Rear axle CRD vehicle versions (*)
H1 = R1 – L1 or H1’ = R1 – L1’
L1 = 75,5 mmL1’ = 109 mmL2 = 23,5 mmH2 = R2 + L2
B3DP079C
Angl.-t2-page361-397-2005 9/01/06 10:22 Page 391

Downloaded from www.Manualslib.com manuals search engine 392
AXLES
SUSPENSION
STEERING
A> B =Negative figure: – = TOE-OUT A < B = Positive figure: + = TOE-INNOTE
AXLE GEOMETRY
Measurements at reference height (compress the suspension to obtain the calculated values).
Vehicles all engine versions (except CRD (*))
Front axle Rear axle
Vehicle Tracking CastorPivot angleCamber Tracking Camber
Adjustable Yes No
ALL TYPES- 1 ± 1 mm3,7 ± 1,3 mm
- 0°18’ à 0°0’2°56’ ± 18’ 10°25’ ± 30’ 0°07’ ± 30’
- 0°33’ ± 0°12’- 1°14’ ± 18’
XSARA PICASSO
B3CP02UC
Angl.-t2-page361-397-2005 9/01/06 10:22 Page 392