2005 Citroen C4 c4 picasso

Downloaded from www.Manualslib.com manuals search engine 397
AXLES
SUSPENSION
STEERING
TIGHTENING TORQUES: POWER-ASSISTED STEERING
Tightening torques (m.daN).
Unions between pump unions and power steering valve: 2 ± 0.3
(16)Fixing screw: 2.2 ± 0.3
(17)Fixing screw: 2.2 ± 0.3
(18) Fixing screw: 2.2 ± 0.3
NOTE: Coat the threads with product «E3».
A pressure switch is implanted in the hydraulic piping between the high
pressure pump and the power steering valve.
- Opening pressure = 30 / 35 bars.
- Closing pressure = 25 barsminimum.
Tightening torque = 2 ± 0.2.
B3EP118D
XSARA PICASSO
Angl.-t2-page361-397-2005 9/01/06 10:22 Page 397

Downloaded from www.Manualslib.com manuals search engine 421
BRAKES
BRAKE SPECIFICATIONS
(*) ESP = Electronic Stability Program.
XSARA PICASSO
Mercosur Europe
Without ESP (*)
EW10J4 DW10TD TU5JP+ EW4J4 EW10J4 DW10TD
Master cylinder23,8
Master-vac/
ØMaster cylinder travel254/34
FT mm
Caliper makesLUCAS BOSCH
PistonC54/54 ZOH54/54
Disc Ventilated266
Disc thickness/min. thickness20,4/18,4 22/20
Makes/brake pad gradeJURID/3724 FERODO/769 (37)
Rear brake plates
Supplier/typeLUCAS/ENERGIT/C52980
Ø Cylinder or caliper22,2
mm Drum/Ø max.228,6/230
RR MakeABEX
Brake lining grade4930/2
Compensator/supplier/typeTEVESITTA
(load-sensitive rear braking compensator)Cut-off pressure in bars20/61,6
Angl.-t2-PAGE398-427-2005 9/01/06 10:24 Page 421

Downloaded from www.Manualslib.com manuals search engine 422
BRAKESBRAKE SPECIFICATIONS
EW4J4 EW10J4 DV6 DW10TD
Master cylinder23,8
Ø Master-vac/
mm Master cylinder travel254/35
FT Caliper makes/pistonsBOSCH ZOH54/54
Disc Ventilated283
Disc thickness/min. thickness26/24
Brake pad supplier/gradeFERODO/769 (37)
Rear brake caliper
Ø Supplier/typeTRW C38
mm Disc plain247
RR Disc thickness/min. thickness9/7
MakeGALFER
Brake lining gradeG 4554
Compensator:
On versions with ABS, there is no load-sensitive rear braking compensator
Cut-off pressure in bars
(*) ESP = Electronic Stability Program.All Types
With ESP (*)
XSARA PICASSO
Angl.-t2-PAGE398-427-2005 9/01/06 10:24 Page 422

Downloaded from www.Manualslib.com manuals search engine 423
BRAKES
B3FP11WD
BRAKING SYSTEM SPECIFICATIONS
Without ABS
XSARA PICASSO
Angl.-t2-PAGE398-427-2005 9/01/06 10:24 Page 423

Downloaded from www.Manualslib.com manuals search engine 424
BRAKES
B3FP7B9DB3FP7BRD
BRAKING SYSTEM SPECIFICATIONS
With EPS (Electronic Stability Program) With ABS
XSARA PICASSO
Angl.-t2-PAGE398-427-2005 9/01/06 10:24 Page 424

Downloaded from www.Manualslib.com manuals search engine 425
BRAKES
BRAKE SPECIFICATIONSXSARA PICASSO
Braking system specifications
- 'X'braking circuit.
- Front: disc brakes, ventilated.
- Rear: drum brakes with automatic adjustment.
- Cable operated handbrake acting on the rear wheels.
- Load sensitive braking compensator
(non ABS versions).
(1)Hydraulic valve block «ABS Bosch 5.3» or
(1)Hydraulic valve block + ECU.
(2)Load sensitive braking compensator
(according to version).
B3FP09HC
B3FP08ND
2
1
Angl.-t2-PAGE398-427-2005 9/01/06 10:24 Page 425

Downloaded from www.Manualslib.com manuals search engine 426
BRAKES
B3FP11XD
PARKING BRAKE ADJUSTMENT
XSARA PICASSO
Adjustment.
Remove the handbrake trim (1).
Unclip the sound-deadening (2).
Raise and support the vehicle with the rear wheels hanging
free.
Check the correct routing of the brake cables under the
vehicle.
Apply and release the handbrake 4 times
.
Set the handbrake to the 5thnotch.
Tighten the nut (3)until the rear brakes are applied.
Pull the handbrake lever vigorously 4to 5 times.
Set the handbrake to the 5thnotch.
Check that the rear brakes are applied.
With the handbrake released, check that the wheels can be
turned freely by hand.
Lower the vehicle.
Refit the sound-deadening (2)and the handbrake trim (1).
Angl.-t2-PAGE398-427-2005 9/01/06 10:24 Page 426

Downloaded from www.Manualslib.com manuals search engine 427
BRAKES
BLEEDING THE BRAKING SYSTEMXSARA PICASSO
Tools Bleeding equipment of type «LURO» or similar.
IMPERATIVE: For bleeding the secondary circuit, use ELIT, LEXIA or PROXIA diagnostic tools.
Draining.
Drain the brake fluid reservoir as empty as possible using a syringe.
Disconnect the brake fluid warning lamp connector.
Retrieve the brake fluid reservoir from its supply pipes by pulling upwards.
Finish emptying the reservoir of brake fluid.
Clean the brake fluid reservoir.
Refit the brake fluid reservoir.
Reconnect the brake fluid warning lamp connector.
Filling.
Refill the reservoir with brake fluid.
WARNING: Use only the recommended hydraulic fluids.
Bleeding.
NOTE:Two technicians are required.
IMPERATIVE: During bleed operations, ensure that the level of brake fluid is maintained
in the reservoir and top it up, use only new brake fluid.
Bleed each wheel cylinder, proceeding in the following order:
- Rear right hand wheel.
- Front left hand wheel.
- Rear left hand wheel.
- Front right hand wheel.
Angl.-t2-PAGE398-427-2005 9/01/06 10:24 Page 427