2005 Citroen BERLINGO change engine oil diesel

Downloaded from www.Manualslib.com manuals search engine 12
GENERAL
Engine type
Oil capacity with change
of cartridge
Between Min. and Max.
Manual gearbox
Braking circuit
Cooling circuit
Additive reservoir
Steering electro-pump
reservoir
Fuel tank9HX 9HY 9HZ RHR
3,75 5,25
1,55 1,9
2 2,7
With ESP = 0,85 Without ESP = 0,75
6,5 8,1
2,5 2,5
0,85
60
CAPACITIES (in litres)
Diesel
1.6 HDi 16V 2.0 HDi 16V
NOTE: (*) = Version with additional heating.
IMPERATIVE: Systematically check the oil level using the oil dipstick.
C4
Angl.-t2-page001-39-2005 9/01/06 10:07 Page 12

Downloaded from www.Manualslib.com manuals search engine 18
GENERAL
LUBRICANTS - TOTAL recommended oils
Use of oil grade 10W40.
It is possible to use the semi-synthetic oil 7000 10W40on HDi and HDi
FAP vehicles.
WARNING: To avoid difficulties when starting from cold
(< 20°C), use
5W40 oil.
For more details, see the oil usage table
(paragraph 3.3).
Commercial description for energy economy oil.
TOTAL ACTIVA FUTUR 9000 5W30
(France only).
TOTAL QUARTZ FUTUR 9000 5W30 (except France).
The exclusions for use of this oil are the following:
- XSARA VTS 2.0 16V (XU10J4RS).
- JUMPER/RELAY 2.8 HDi and 2.8 TDi (SOFIM engine).
- HDi FAP vehicles.
- CITROËN C3 HDi 16V (DV4TED4).
- CITROËN C8 2.2i (EW12J4).
- CITROËN C4 and C5 2.0i (EW10A).
- CITROËN C4 (EW10J4S).
Engine oil norms.
Current norms.
The classification of these engine oils is established by the following
recognised organisations:
- S.A.E : Society of Automotive Engineers.
- API: American Petroleum Institute.
- ACEA: Association des Constructeurs Européens d'Automobiles.S.A.E. Norms - Table for selection of engine oil grade.
Selection of engine oil grades recommended for climatic conditions in
countries of distribution
(see table, paragraph 3.3).
Evolution of the norms to 01/01/2003.
ACEA 2003 norms.
The meaning of the first letter has not changed, it still corresponds
to the type of engine:
A: petroland dual fuelpetrol / LPG engines.
B: dieselengines.
The figure following the first letter corresponds to the type of oil:
3:high performance oils.
4:oils specifically for direct injection diesel engines.
5:very high performance oils permitting lower fuel consumption, specific to
direct injection diesel engines.
Example:
- ACEA A3: high performance oils specifically for petrol and dual fuel petrol/
LPG engines.
- ACEA A/B: blended oils giving very high performance for all engines, also
permitting better fuel economy, specifically for direct injection diesel engines.
NOTE: From 01/01/2003there is no longer any reference to the year of
creation of the norm
(example : ACEA A3/B3 98becomes ACEA A3/B3).
Angl.-t2-page001-39-2005 9/01/06 10:07 Page 18

Downloaded from www.Manualslib.com manuals search engine 19
GENERAL
LUBRICANTS - TOTAL recommended oils
API Norms:
The meaning of the first letter has not changed, it still corresponds to the
type of engine:
S: petroland dual fuel petrol/ LPG engines.
C: diesel engines.
The second letter corresponds to the degree of evolution of the oil
(ascending order).
Example:Norm SLis more severe than norm SJ, corresponding to
a higher level of performance.
Recommendations.
ESSENTIAL: To preserve engine performances, all engines fitted in
CITROËN vehicles must be lubricated with high quality oils
(synthetic
or semi-synthetic).
CITROËNengines are lubricated at the factory with TOTALoil of grade
S.A.E 5W-30.
TOTALoil of grade S.A.E 5W-30allows improved fuel economies
(approx 2.5%).
The oil 5W30is used only for the following engines (year 2004):
- XU10 J4RS: XSARA VTS 2.0i 16V (3-door).
- SOFIM: JUMPER / RELAY 2.8 TDi and 2.8 HDi.
- HDi: With particle filter (FAP).
- DV4 TED4: CITROËN C3 1.4 16V HDi.
- EW 12J4: CITROËN C8 2.2i.
- EW 10A: CITROËN C4 and C5 2.0i.
- EW10J4Sengine : CITROËN C4.WARNING: CITROËN engines prior to model year 2000 do not have
to be lubricated with oils adhering to the norms:
- ACEA AI-98and API SJ/CF ECor current norms ACEA A5/B5.
Denomination of TOTALoils according to country of marketing:
- TOTAL ACTIVA
(France only).
- TOTAL QUARTZ(outside France).
Summary.
Norms to be respected for engine oils
(year 2004).
Year Engine types concernedACEA API
Norms Norms
Petrol and LPG dual fuel enginesA3 or A5
2003(*)SJ or SL
Diesel enginesB3, B4
or B5 (*)CF
(*)It is essential not to use engine oils respecting these norms for
XU10J4RS, SOFIM 2.8 TDi and SOFIM 2.8 HDiengines, HDi engines
with particle filter EW10A, EW12J4, DV4TED4.
Angl.-t2-page001-39-2005 9/01/06 10:07 Page 19

Downloaded from www.Manualslib.com manuals search engine 128
ENGINESPECIAL FEATURES - TIGHTENING TORQUES (m.daN)
Engines9HZ - 9HY
Lubrication circuit
Oil pump assembly
Pre-tightening0,5 ± 0,1
Tightening0,9 ± 0,1
Oil/coolant heat exchanger1 ± 0,2
Turbocharger lubrication pipe3 ± 0,5
Diesel injection circuit
Injector fixing flange nut
Pre-tightening4 ± 0,1
Angular tightening65°±5°
Fuel high pressure common injection rail on engine block 2,2 ± 0,2
Union on fuel high pressure common injection rail
Pre-tightening1,7 ± 0,2
Tightening2,2 ± 0,2
Diesel injection pump on support2,2 ± 0,2
Union on injector diesel
Pre-tightening2 ± 0,5
Tightening2,5 ± 0,3
XSARA PICASSO
Angl.-t2-page040-134-2005 9/01/06 10:11 Page 128

Downloaded from www.Manualslib.com manuals search engine 133
ENGINE
SPECIAL FEATURES - TIGHTENING TORQUES (m.daN)
Flywheel
Flywheel4,8 ± 0,4
Clutch mechanism2 ± 0,2
Lubrication circuit
Oil pump2,3 ± 0,2
Coolant/oil heat exchanger7 ± 0,7
Injection circuit
Injector on cylinder head9 ± 0,9
Diesel fuel heater1,5 ± 0,1
Injection pump2 ± 0,2
Union on injector2,5 ± 0,2
Injection pump pulley2,3 ± 0,2
Cooling circuit
Coolant pump1,5 ± 0,1
Coolant inlet housing1,8 ± 0,1 Engine: WJY
XSARA
Angl.-t2-page040-134-2005 9/01/06 10:11 Page 133

Downloaded from www.Manualslib.com manuals search engine 136
ENGINESPECIAL FEATURES - TIGHTENING TORQUES (m.daN)
Flywheel
Flywheel4,8 ± 0,4
Clutch mechanism2 ± 0,2
Lubrication circuit
Oil pump1,6 ± 0,2
Coolant oil heat exchanger7 ± 0,7
Turbocharger lubrication pipe
Engine end4,8 ± 0,4
Turbocharger end2,2 ± 0,2
Injection circuit
Injector fixing flange nut3 ± 0,3
Unions on fuel high pressure common injection rail2 ± 0,2
Injection pump on support2,3 ± 0,2
Union on diesel injector2 ± 0,2
Injection pump pulley5 ± 0,5
Union on fuel high pressure pump2 ± 0,2
Cooling circuit
Coolant pump1,5 ± 0,1
Coolant inlet housing1,8 ± 0,1 Engines: RHY - RHZ
XSARA
Angl.-t2-page135-239-2005 9/01/06 10:13 Page 136