2005 CHRYSLER PT CRUISER boot

UNDERSTANDING THE FEATURES OF YOUR VEHICLE
CONTENTS

Convertible Top Operation.................62
▫To Lower The Top......................62
▫To Raise The Top......................66
▫Convertible Top Boot Cover Installation–If
Equipped............................68
▫Convertible Top Boot Cover Removal And
Storage.............................72
▫Convertible Top Manual Override..........73

Mirrors...............................75
▫Inside Compass/Temperature Mirror........75▫Outside Mirror—Driver’s Side.............78
▫Outside Mirror—Passenger’s Side...........78
▫Electric Remote-Control Mirrors............79
▫Illuminated Vanity Mirrors................80

Seats.................................80
▫Front Seat Adjustment...................80
▫Driver’s Power Seat Height Adjuster—If
Equipped............................81
▫Reclining Bucket Seats...................82
3

4. Continue pressing the Power Top Switch until the
convertible top is lowered completely.5. Install the Convertible Top Boot Cover, if equipped.
Refer to Convertible Top Boot Cover Installation–If
Equipped, in this section.
CAUTION!
Damage to the convertible top boot cover could
result if the latch handle is not completely closed
when the top is lowered. The convertible top boot
cover cannot be installed while the latch handle is
open.
Convertible Top Switch
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 65
3

To Raise The Top:
CAUTION!
To avoid damage to the convertible top or its com-
ponents, your vehicle is equipped with a feature that
prevents convertible top operation at speeds over 10
mph (16 km/h).
CAUTION!
To fully insure that no damage occurs, be sure that
the vehicle is at a complete stop with the gear
selector in the Park position (automatic transaxle) or
in the Neutral position (manual transaxle) before
lowering or raising the top.
1. Remove the convertible top boot cover, if equipped.
Refer to Convertible Top Boot Cover Removal and Stor-
age, in this section.
2. Turn the ignition to the ON position.
3. Press the Power Top Switch to raise the top. Before the
top reaches the windshield, open the latch handle and
turn the handle clockwise to open the latches. Press the
switch again to continue raising the top until the two pins
seat themselves in the windshield header.
NOTE:If the top is not latched right away, it may be
necessary to press the power top switch,“UP”or
“DOWN”quickly, to align the pins to the windshield
header.
4. Pull down on the latch handle and rotate it counter-
clockwise to engage the latches.
66 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Convertible Top Boot Cover Installation–If
Equipped
1. With the top down and the convertible top latch
handle in the stowed position, lay the unfolded boot
cover across the convertible top.
Convertible Top Latch Handle
Boot Laying Across Convertible Top
68 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

2. Install the rear edge of the boot, first tucking the rear
edge of the boot under the rear and both sides of the rails.
Tucking Boot Under Rail
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 69
3

3. Pull the right and left boot arms forward and engage
both boot arm snaps. Make sure both snaps are fully
engaged.4. Engage the boot center section retainer using the tabs
provided.
Engaging Boot Arm Snaps
Engaging Boot Center Section
70 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

5. Tuck the rear flap of the boot in behind the Upper
Moulding.
Tucking In Rear Flap
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 71
3

Convertible Top Boot Cover Removal and
Storage
1. Unsnap the snaps and remove the top cover boot.
2. Lay the boot cover flat with the center section retainer
facing the rear of the car.3. First fold the left side of the boot cover to the middle
of the boot cover.
Boot Removed And Laying Flat
Folding Boot Cover Left Side
72 UNDERSTANDING THE FEATURES OF YOUR VEHICLE