Getting to Know YourRainier12
• Press the blue OnStar button to
connect to an OnStar Advisor for services such as GM Goodwrench Remote Diagnostics or routing and location assistance.**
• Press the red Emergency button to
connect to an OnStar Advisor who can contact a nearby emergency services provider to dispatch ambulance, police, fire, or other emergency services to your location.
For more information about OnStar fea
tures, refer to the OnStar Owner’s
Manual and Audio Tour CD, located inyour glove box.
*Available in most markets
**Routing and location assistance may require
service upgrade
See Section 2 of your Owner Manual.
Audio Systems
Radio with Cassette/CD and RDS
Setting the Clock:
Press and hold the
H (or HR) button until the correct hour
appears. AM or PM will appear on the
radio display. Press and hold MN untilthe correct minute appears.
To set the time to the time of an FM
station broadcasting RDS information,press/hold HR and MN simultaneously
for two seconds until UPDATED (and
the clock symbol) appears on the dis play. If the time is not available from the
station, NO UPDAT will appear.
Using RDS Mode:Your radio’s RDS
mode allows you to:
• Seek only stations with your preferred
programming type
• Seek stations with traffic
announcements (MP3 radio only)
• Receive announcements of local
and/or national emergencies
• Receive and display messages from
radio stations
RDS features are available on FM sta
tions that broadcast RDS information.When tuned to an RDS station, the radiodisplays the station name instead of thefrequency. Most RDS stations broadcast
their station name, time of day and a
Program Type (PTY).
DISP:Press this knob to toggle
between the station frequency, station
name, PTY and the name of the pro gram if available.
TRAF: Press this button to activate the
traffic announcement feature. The radio
Setting Stations:You can set up to 30
station presets (six AM, six FM1, six
FM2; an XM1 and XM2 satellite sub scription is available).
• Turn the radio on.
• Press BAND to select AM, FM1, etc.
• Tune to the desired station using the
seek function or tune knob.
• Press AUTO EQ or AUTO TONE (as
applies to your radio) to select thesound equalization best suiting thetype of station selected.
• Press/hold a numbered button until a
beep confirms storage of the station.
•Repeat the previous steps for each
pushbutton.
