Getting to Know YourRainier6
Programmable Automatic Power
Door Locks
Your vehicle includes an automatic door
lock/unlock feature with a choice of four
modes, as well as automatic door lock out protection to prevent locking thekeys in the vehicle. In the event thepower door lock switch is activatedwhen a door is open and the key is inthe ignition, the driver door will unlock.
Locking Options:The default setting
for the programmable automatic powerdoor locks is to lock automatically whenthe transmission is shifted into gear (Mode 1).
Other locking options include:
Mode 2: All doors lock when vehicle
speed is over 8 mph (13 kph)
Unlocking options:Choose one of the
following options before personalizingyour unlocking preference:
Mode 1: Driver door unlocks when the
transmission is placed into Park
Mode 2: All doors unlock when the
transmission is shifted into Park
Mode 3: All doors unlock when the key
is removed from the ignition
Mode 4: No automatic door unlock
Memory Settings for Driver’s
Seat, Mirrors and Pedals
Use the driver’s door mounted controls
(shown above) to program and recallmemory settings for the following features:
• Driver’s seat, including seatback
recliner and lumbar adjustment
• Accelerator and brake pedals
• Outside rearview mirrors
Programming a Memory Setting
• Adjust the above features to your
preferred settings.
• Press and hold memory 1 or 2 button
located on the driver’s door until two
chimes sound (about three seconds). This confirms that your settings are stored.
• To program memory positions for
another driver, repeat the process using the other memory button.
Recalling Memory Settings
Each time memory button 1 or 2 on the
driver’s door is pressed while the vehicle
is in Park (P), a single chime will soundand the memory position(s) will berecalled.
See Section 2 of your Owner Manual.
Heated Seats (if equipped):The but
tons to control this feature are locatedon the front door armrests. Controls canbe set to heat the seatback only or theseatback and the seat cushion. The
three lights next to the controls indicateLO, MED or HI setting. Push the BACK
ONLY switch (“B” above) to activate
heat for the seatback only. An indicatorlight illuminates when the seatback isbeing heated. Push the horizontal switch(“A” above) to heat the whole seat.
See Section 1 of your Owner Manual.
Easy Exit Driver Seat
Two personalized driver exit seat posi
tions can be set by following thesesteps:
1. First, set the Easy Exit Driver Seat
feature to “ON” in your Driver
Information Center (see “Vehicle Personalization” in the Driver Information Center section of this booklets).
Getting to Know YourRainier10
Seats
A B
Electric Adjustable Pedals
(if equipped)
Shorter drivers can
adjust the brake andaccelerator pedals to
a comfortable posi
tion by using the tog
gle switch located on the steering col
umn. The vehicle must be in Park (P) forthis feature to operate.
• Press the switch toward you to move
the pedals closer.
• Press the switch away from you to
move the pedals away from you.
This feature can be programmed to work
with your vehicle’s memory feature. See
the Memory Settings for Driver’s Seat,Mirrors, Pedals, Radio and ClimateControls section of this booklet.
See Section 2 of your Owner Manual.
Note:
The engine must be running for
the heated seat feature to operate.
