Getting to Know YourLaCrosse4
Driver Information Center (DIC)E/M (English/Metric):On the base DIC,
press to choose English or Metric units.
On uplevel DICs, press the (Option)button until “UNITS” appears. Press the
(Set/Reset) button to choose English
or Metric units.
(Set/Reset)(if equipped): Press to
set/reset certain functions and to turn
off/acknowledge DIC messages.
(Gauges)(if equipped): Press to dis
play battery and oil life. To reset the OilLife System after an oil change, press
and hold the (Set/Reset) button while
“OIL LIFE” is displayed until it shows100%.
(Fuel)(if equipped): Press to display
fuel range, average economy and
instantaneous economy.
(Option) (if equipped): Press to dis
play English/Metric units, language, per
sonalization, compass zone and com pass calibration.
(Traction Control)(if equipped):
Press to turn traction control on or off.
(Hazard):Press to turn the hazard
warning flashers on or off.
Personalizing the DIC (if equipped)
Uplevel DICs can memorize selected
personalized settings for up to two drivers. (Some features are limited to asingle setting.)
1. Place the vehicle in Park (P) and turn
on the ignition.
2. Press the (Option) button
until “PERSONALPROGRAM” is
displayed.
3. Press the (Set/Reset) button
to display instructions.
4. Press the button to display
programmable features.
The base level Driver Information
Center (DIC) displays the odometer and
trip odometer. Uplevel DICs also display
a compass, trip computer, fuel economyinformation, OnStar
®phone numbers
called (if equipped) and other messages
or warnings. The DIC display is locatedon the instrument cluster below the
speedometer, and can be programmedin English, French or Spanish.
Outside temperature displays in the
bottom right corner of the uplevel DICwhen viewing the trip/odometer screens,fuel screens and some gauge screens.
At 37ºF (3ºC) or below, readings togglebetween temperature and the word“ICE” for two minutes.
The following DIC controls are located
on the center of the instrument panel:
TRIP/ODO (Trip/Odometer):On the
base DIC, press to display odometer/tripdistance. Uplevel DICs also display timeelapsed and average speed.
