EN/9Retrofit kit No. 65 12 0 153 501 (others see cover sheet)
Installation Instructions No. 01 29 0 153 504 Issue date: 10.2002
4. To install and connect the AUX connector wiring harness in E39 cars
0
0
0
00
All holes must be drilled precisely as shown in the
illustration.
Drill a hole (2) in the rear of the glove compartment (1)
with an 8 mm twist drill bit.
Drill the holes (3) using a 3 mm twist drill bit.
0Insert branch B1/C1 in the glove compartment (1) and
secure it to the mounting plate D with a knurled nut (2).
Secure the mounting plate D to the glove compartment
(1) using Philips screws E.
0Cars with SA 661+650/663 only
Connect branch B2 to plug X18126.
If the plug X13321 is already in the car, the cables
from branch B2 must be disconnected and
connected to the same pins in the plug in the car
X13321.
0Cars with SA 602/609 only
Connect branch C2 to tied back plug X14118.
039 0517 Z
1
2
2
1
3
3
Auxiliary
Input
Auxiliary
Input
039 0518 Z
1
2
E
B1/C1
D
X18126
B2
039 1122 Z
039 0519 Z
X14118C2
EN/10Retrofit kit No. 65 12 0 153 501 (others see cover sheet)
Installation Instructions No. 01 29 0 153 504 Issue date: 10.2002
5. To install and connect the AUX connector wiring harness in E53 cars
0
0
0
00
All holes must be drilled precisely as shown in the
illustration.
Drill a hole (2) in the trim (1) through the rear of the glove
compartment with an 8 mm twist drill bit.
Open the glove compartment and enlarge the hole (2) to
a diameter of 20 mm.
0Insert branch B1/C1 in the glove compartment (1) and
secure it to the mounting plate D with a knurled nut (2).
Mark the mounting holes and drill them with a 3 mm twist
drill bit.
Secure the mounting plate D to the glove compartment
(1) using Philips screws E.
0Cars with SA 661+650/663 only
Connect branch C2 to plug X18126.
If the plug X13321 is already in the car, the two
cables from branch C2 must be disconnected and
connected to the same pins in the plug in the car
X13321.
0Cars with SA 602/609 only
Connect branch C2 to tied back plug X14118.
053 0388 Z
1
2
1
2
Auxiliary
Input
Auxiliary
Input
053 0391 Z
D
2
E
1B1/C1
X18126
C2
039 1123 Z
1
X14118C2
053 0390 Z
EN/11Retrofit kit No. 65 12 0 153 501 (others see cover sheet)
Installation Instructions No. 01 29 0 153 504 Issue date: 10.2002
6. Concluding work and coding
This retrofit system does not require coding.
- Connect battery
- Conduct a brief test with DIS/GT1
- Conduct a function test
- Re-assemble the car
EN/12Retrofit kit No. 65 12 0 153 501 (others see cover sheet)
Installation Instructions No. 01 29 0 153 504 Issue date: 10.2002
7. Circuit diagram
E46 with SA 661+650/663 only
0
E39/E53 with SA 661+650/663 only
0
E39/E46/E53 with SA 602/609 only
0
Legend
Cable coloursA1 Pawl plug 3.5 mm
X18805 10-pin GR socket casing
B1 Pawl plug 3.5 mm
X13598 SW 12-pin socket casing
C1 Pawl plug 3.5 mm
X14118 SW 3-pin plug casing
BL blue
BR brown
GE yellow
GR grey
SW black
WS white
8
9
4Audio-R+
1
3 2
Audio-L+
Audio-GND WS/BL 0,35
WS/GE 0,35
WS/BR 0,35
X18805 A1
C=0,22 F
R=300kΩ
C=0,22 F
046 1124 Z
4
3
10Audio-R+
1
3 2
Audio-L+
Audio-GND WS/BL 0,35
WS/GE 0,35
WS/BR 0,35
X13598 B1
C=0,22 F
R=300kΩ
C=0,22 F
046 1125 Z
1
3
2Audio-R+
1
3 2
Audio-L+
Audio-GND WS/BL 0,35
WS/GE 0,35
WS/BR 0,35
X14118 C1
C=0,22 F
R=300kΩ
C=0,22 F
046 1126 Z
