Page 13 of 126

Cockpit
12
Colors
The indicator and warning lamps can light up in 
different colors and combinations.
The following section explains the significance 
of the individual colors as well as how you 
should respond when they appear.
>red:
Stop the vehicle immediately
or
an important reminder
>yellow:
Have the system inspected as soon as 
possible
or
For your information
>green:
For your information
>blue:
For your information
Buttons on steering wheel* 
The buttons integrated into the steering wheel 
are provided so that you can operate a number 
of accessories quickly and without being dis-
tracted from traffic conditions. You may oper-
ate: 
>Selected audio source functions
>Recirculated-air mode/steering wheel 
heater Brake warning lamp for Canadian 
models
Driving stability control systems/
ABS Antilock Brake System 
+49
ABS Antilock Brake System/chassis 
control system for Canadian models
Brake pads
 +92
DSC Dynamic Stability Control/
xDrive
+ 47, 49
Flat Tire Monitor 
+49
Automatic transmission 
+36
Engine oil 
+90
Service Engine Soon 
+94
Service Engine Soon warning lamp for 
Canadian models
Check Gas Cap
* +80
Engine electronics 
+34
Battery charge current 
+101
Topping off coolant91
Topping off washer fluid90
Lamp defective53
Turn signals38
Front fog lamps54
Headlamp flasher38
High beams54
Cruise control40
Indicates from ignition key in posi-
tion 2 when a door or the tailgate is 
opened. 
     
        
        Page 43 of 126

Everything under control
42
Everything under control
Odometer 
1Odometer
2Trip odometer
Odometer 
You can activate the displays shown in the illus-
tration in ignition key position 0 or with the igni-
tion key removed by pressing the button in the 
instrument cluster. 
Trip odometer 
To reset to zero:
1.Ignition key in position 1.
2.Press and hold the button until the trip 
odometer is reset to zero.
Tachometer 
Engine speeds in the red warning field must 
absolutely be avoided. 
In this range, the fuel supply is interrupted to 
protect the engine.
Fuel gage 
If the indicator lamp 1 starts to light up continu-
ously, there are approx. 2 gallons /8 liters of fuel 
in the tank.
Fuel tank capacity: 
Approx. 17.7 gallons/67 liters.
If the tilt of the vehicle varies, when you are driv-
ing in mountainous areas, for example, the indi-
cator may fluctuate slightly. 
Refuel well before the tank is empty, as 
otherwise engine functions will not be 
ensured and damage can occur if you drive 
down to the last drop.< 
When you switch on the ignition, the indicator 
lamp comes on briefly to confirm that the sys-
tem is operational.
Coolant temperature gage 
Blue
The engine is still cold. Drive at moderate 
engine and vehicle speeds.  
     
        
        Page 44 of 126

Reference
At a glance
Controls
Driving tips
Mobility
 43
Between blue and red fields
Normal operating range. It is permissible for the 
dial to drift up to the red field. 
Red
Comes on while driving: 
The engine is overheated. Switch off the engine 
immediately and allow it to cool down.
Checking coolant level, refer to page91. 
When you switch on the ignition, the warning 
lamp1 comes on briefly to confirm that the sys-
tem is operational. 
Service Interval Display 
Remaining distance until next service 
due 
The displays shown in the illustration appear for 
a few seconds as of ignition key position 1 or 
after starting the engine. 
Together with the message OIL SERVICE or 
INSPECTION, the next scheduled service and 
remaining distance to this service are displayed 
in miles/kilometers.
The remaining distance is determined on the 
basis of the past driving style.
A flashing display and a '– sign' before the 
numerical value mean that the service interval 
has been passed by the displayed number of 
miles/kilometers. Please make an appointment 
with your BMW Sports Activity Vehicle Center.
Clock 
If you want to have a continuous clock display, 
you can also have the time displayed in the dis-
play of the car radio, refer to Owner's Manual for 
Radio.
You can adjust the clock, also for display in the 
radio, as follows.
Setting time 
As of ignition key position 1:
Hours
1.Hold button2 pressed for a few seconds 
until the hours are displayed and the colon 
flashes.
2.Press button1 repeatedly until the desired 
hour is set.
Minutes
3.Press button2 to change to the minutes.
4.Press button1 repeatedly until the desired 
minutes are set.
5.Press button2.
Time is confirmed.
The set time is transferred to the display of the 
radio or displayed in the instrument cluster.
Display mode
Ignition key in position 0 or removed:
Press button1.
The time and display of the miles/kilometers 
appear for a few seconds.