2005 AUDI A8 RNS_E Navigation System Manual

Navigation (NAV) 132Route plan information before starting Route guidanceFig. 137 Navigation: Example of route plan map overview– Press the control knob to start the route guidance
desired with the stopovers you set.If you are navigating with stopovers, no alternate routes are calcu-
lated. The calculated route shown matches the route criteria
selected
page 141.
The following information can be found on the map display before
starting the route.
Route guidance includes sections of freeway
Estimated freeway kilometers
Route includes sections of road subject to tolls or sticker
showing the length of the sections
Route includes sections with a ferryRoute includes seasonally closed roads
Route includes roads closed at certain times of day
Estimated distance to destination
Estimated time of arrival at destination
Starting point highlighted
Highlighted stopover 1 on the map
Highlighted stopover 2 on the map
Highlighted stopover 3 on the map
Final destination highlighted on map
Orientation
Scale
Changing/Interrupting route guidance– Press the function button or press the
button.
– Select Stop route guidance.
– Change the information if necessary.
– Select Start route guidance.When route guidance is cancelled, the data and settings that have
already been entered are saved. This allows you, for example, to
change the route criteria
page 141 and to recalculate the route.
If you do not complete route guidance you started, this route guid-
ance will be contin ued the ne xt time the ve hicle is star ted . This also
applies to destinations entered which cannot be reached because of
local conditions (e.g. lake or tourist attraction). If you would like to
A1AA A
A4A9A:AA A;;A;A; A;A;4
NAV
RETURN

Navigation (NAV)133
General operation
RADIO, CD
NAME, TEL
NAV, INFO
CAR, SETUP terminate this route guidance, select Cancel route guidance
page 132Tips
Calculated destinations can also be changed in the map display by
moving the crosshairs
page 149.
To p d e s t i n a t i o nFig. 138 Navigation: Set entry as top destinationFig. 139 Navigation: Map display of a top destination (push pin)
– In a destination input menu
page 117, fig.121, select
the top destination desired from the list below the menu
item “Start route guidance”.
– Select Start route guidance.If you have activated the Display as top destination
fig.138 func-
tion when making entries in the directory (
page 135 or
page 103), they are listed
page 136 in a destination input menu
page 117, fig.121 under the menu item “Start route guidance” .
If you have activated the top destinations
page 155in the “Map
content” menu with a checkmark
, the top destinations you set are
indicated by a “push pin” on the map
fig.139.

Navigation (NAV) 134Memory control buttonPrevious destinations
The previous destinations are stored and can be
loaded directly as a navigation destination.Fig. 140 Navigation: select previous destinations–Press the Memory c o n t r o l b ut t o n i n t h e n a v i g a t i o n m e n u .
– Select Previous destinations. You will see a list of the
most recently entered destinations. This list is updated
automatically.
– Select your desired entry.
– Select Start route guidance.Tips


There may be entries which cannot be displayed fully in the
display because they contain too many letters and are too long. If
you select one of these entries using the control knob, a second
window will open up after a few seconds. You will be given addi-
tional information about the selected entry in this window.


The list of previous destinations can be deleted in the Setup
Navigation menu
page 156.
To p c a t e g o r i e sFig. 141 Navigation: Top categories–Press the Memory control button in the navigation menu.

Navigation (NAV)135
General operation
RADIO, CD
NAME, TEL
NAV, INFO
CAR, SETUP
–Select Top categories
page 134, fig.140. You are given
a list of suggestions with categories for useful special
destinations.
– Select the desired category (e.g. Gas station. You are
provided with a list containing the special destinations
from the selected category.
– Select a destination from the list.
–Select Set as destination. Die Zieldaten werden automa-
tisch in das Zieleingabemenü übernommen.
–Select Start route guidance.The special destinations are sorted according to distance from your
present location.
The following top categories are available:

Parking lot


Parking garage


Gas station


Audi service


HospitalTips
If no top special destination is found for the category selected, there
is no top special destination from this category in your vicinity or no
top special destination from this category exists on the navigation
DVD.
Store in directory
The current destination can be stored in the directory.Fig. 142 Navigation: Save current destination to directory– Enter a single destination
page 119.
–Press the Memory control button.
– Select Store in directory.
– Select New directory entry and complete the directory
card, or
– Select Find entry, to file the destination under an existing
directory card.

Navigation (NAV) 136
– I f y o u w a n t t h e a d d r e s s t o a p p e a r i n t h e To p D e s t i n a t i o n s
list
page 133 in einem Zieleingabemenü, select
Display as top destination
page 133, fig.138 and press
the control knob. A check

appears after the option.
– Select Save entry.
Using Store in directory you can assign an entry in your directory to
a destination
page 119.
A Name must first be entered in the directory data fields. After the
name has been entered, the remaining data fields can be selected.
I f yo u wa n t t o as s i g n a d e s t i n a t i o n to a n e n t r y a l re a d y s to re d in y o ur
directory, you must first enter the destination. Then select the entry
to be assigned using Store in directory and save it. The destination
entered is assigned to this entry. If you already have a destination
assigned to an directory entry, the new destination will overwrite
the old destination.
Addresses saved as top destinations are displayed in the destina-
tion input menu and can be selected there
page 133.
Tips


R o u t e p l a n s (ro u t e w it h s t o p o v e r s ) c a n b e s t o re d u s i n g t h e Store
route function
page 137.


Administration of the directory data is handled through the
button
page 98.
Load from directoryFig. 143 Navigation: Load from directory–Press the Memory control button in the navigation menu.
– Select Load from directory
page 134, fig.140.
– Select your desired destination from the list, or
– Select Find entry
fig.143.
– Enter the name you are looking for using the speller or
select one from the list.
– Select Start route guidance.You can also edit an existing address. The current address will then
be replaced.
NAME

Navigation (NAV)137
General operation
RADIO, CD
NAME, TEL
NAV, INFO
CAR, SETUP
Tips
Administration of the directory data is handled through the
button
page 98.
Save route
Once calculated, route plans can be saved with the
route criteria you entered and loaded later as a new
destination.Fig. 144 Navigation: Route plan– Enter a route plan
fig.144.
–Press the Memory co n t ro l bu t to n i n t h e n a vi g a t i o n m e n u .
–Select Save route.– Using the speller, enter the name for the route.
– Select OK in the speller. The route plan entered is saved.
A route plan provides the option of setting up to three stopovers in
addition to a destination
page 121. You can then drive to each of
these destinations in turn in the sequence set up.
The route entered will be saved with the final destination and stop-
overs and can be loaded again as a new destination
page 137.
The route plan can be changed at any time after input is complete.
Select a destination from the route plan by rotating and pressing
the control knob. Then you can select Change, Move, Delete o r Drive
to now
page 137.
If you have selected the Drive to now function and you would not
l i k e t o e d i t t h e r o u t e , r o u t e g u i d a n c e i s i m p o r t e d a n d c u r r e n t v e h i c l e
location is used as the route guidance starting point after you have
selected Start route guidance.
If the Save route f u n c t i o n i s g r e y e d o u t , t h i s i n d i c a t e s t h a t e i t h e r t h e
route memory is full or the Route without stopover function (single
destination mode) is set. Please delete routes not needed from the
route memory
page 138. Or select the Route with stopover func-
tion
page 139Tips
You can save individual destinations to the directory
page 135.
Load route–Press the Memory c o n t r o l b ut to n i n t h e n a v i g a t i o n m e n u .
NAME

Navigation (NAV) 138
– Select Load route
page 134, fig.140.
– Select the route that you would like to load from the list.
– Select Start route guidance.After storing several route plans
page 137, they can be loaded
with a few operating steps.
A route plan can be changed at any time. Select a destination from
the route plan by rotating and pressing the control knob. Then you
can select Change, Move, Delete or Drive to now.
Change
Here you are entering new navigation data for your destination or
stopover.
Move
Here you are reordering the sequence of your destination and stop-
overs.
Delete
The selected destination or stopover can be deleted. If you delete a
destination, the system will automatically select a stopover and
make that your new destination.
Drive to now
You can drive directly to the selected final destination or stopover.
If you do not want to ed it the saved route, the route will b e sa ved in
the memory when Start route guidance is activated and the current
vehicle location will be used as the starting point for navigation.
Tips
A function may not be selected (“greyed-out”) if it is not available
according to the restrictions you have set, or if not permitted by
local circumstances.Delete route–Press the Memory control button in the navigation menu.
– Select Delete route.
– Select the route to be deleted from the list.
–Confirm Are you sure you want to delete the route? with
Ye s. The selected route is deleted.

Navigation (NAV)139
General operation
RADIO, CD
NAME, TEL
NAV, INFO
CAR, SETUP
Route control buttonRoute with/without stopoverFig. 145 Navigation: Route with stopoverFig. 146 Navigation: Route plan
Only the type of route guidance which is not active at the
time is shown in the display as available.
–Press the Route control button in the navigation menu.
– If you would like to visit stopovers on the way to your
final destination, select Route with stopover
fig.146
and enter your driving route with stopover and destina-
tion addresses into the Route plan
page 121.
– If you want the Navigation System to take you to your
final destination without stopovers, select Route without
stopover and enter the address of your destination

page 119.The system operates with the type of route guidance you selected
until it is changed. For example, if you have selected Route with