2005 Alfa Romeo GT display

GETTING TO KNOW YOUR CAR
83
DIMMER
With this function it is possible to adjust the lighting (dimming/brightening) of the instrument cluster, mileage recorder (total, trip meter),
headlamp aiming display, radio display, radio navigator display and two-zone climate control.
Partial lighting
Keeping the
ãbutton pressed (on the plate at the side of the steering column) for more than 4 seconds, the instrument cluster light-
ing is turned off with the exception of the speedometer.
Keeping the
âbutton pressed (on the plate at the side of the steering column) for more than 4 seconds, the complete instrument clus-
ter lighting is turned on again.
Standard screen
with mechanical
transmission
Standard screen with
Selespeed transmission
Return to
standard screen
IMPORTANT
When the outer lights are switched on, dimming of the brightness
can be perceived. In the event of any faults, lighting adjustment
(rheostat) is not possible and the display is
shown at its maximum brightness.
QR
â
ã
â
ãâ
ã
See
INITIAL CHECK

GETTING TO KNOW YOUR CAR
84
DISPLAYS IN CONCURRENCE WITH THE EVENT
Standard screen:
when the radio is
turned on in the
RADIO DISPLAY ON
condition
Standard screen:
when a phone call is
received in the TELEPHONE
DISPLAY ON conditionDisplay with the ignition key removed open-
ing or closing a door.
The reconfigurable multifunction display
together with the mileage recorder display
(total and trip) is timed, after 10 seconds it
goes off automatically.
In the event of a failure
see the “Warning lights”
chapterStandard screen:
during assisted
navigation in the
NAVIGATION DISPLAY
ON condition
The displays illustrated
are purely indicative.
fig. 87
A0A0676b

GETTING TO KNOW YOUR CAR
85
Warning
light on dialMessage
on display
WARNING LIGHTS
IMPORTANTThe number of warning lights present depends on the type of engine and equipment with which the car is fitted.
x
LOW BRAKE FLUID AND/OR HANDBRAKE ON
Turning the ignition key to MARthe warning light on the dial turns on, but it should go off after
approx. 4 seconds.
The warning light turns on when the level of the brake fluid in the reservoir falls below the min-
imum level, due to a possible leak in the circuit and when the handbrake is engaged.
If the
xwarning light turns on when travelling check that the hand-
brake is not engaged. If the warning light stays on with the handbrake
off (on some versions together with the message + symbol shown on
the reconfigurable multifunction display) stop the car immediately and contact
Alfa Romeo Authorised Services.
u
HIGH ENGINE COOLANT FLUID TEMPERATURE
Turning the ignition key to MARthe warning light on the dial turns on, but it should go off after
approx. 4 seconds.
The warning light turns on (on some versions together with the message + symbol shown on
the reconfigurable multifunction display) when the engine is overheated. If it turns on when trav-
elling, stop the car, leaving the engine on and slightly accelerated to further activate the circula-
tion of the coolant fluid.
If the warning doesn’t go off within 2 or 3 minutes, stop the car immediately and contact Alfa
Romeo Authorised Services.

GETTING TO KNOW YOUR CAR
86
Warning
light on dialMessage
on display
¬
AIR BAG FAILURE
Turning the ignition key to MARthe warning light on the dial turns on, but it should go off after
approx. 4 seconds. The warning light stays on glowing steadily if there is an operating failure in
the Air bag system.
If the
¬warning light does not turn on when turning the ignition key
to MAR or if it stays on when travelling, this could indicate a failure in
safety retaining systems; under this condition air bags or pretension-
ers could not trigger in the event of collision or, in a restricted number of cas-
es, they could trigger accidentally. Stop the car and contact Alfa Romeo Autho-
rised Services.
The failure of the ¬warning light (warning light off) is also indicat-
ed by the flashing for more than the normal 4 seconds of the passen-
ger’s front air bag deactivated warning light.
v
LOW ENGINE OIL PRESSURE
Turning the key to MARthe warning light on the dial turns on, but it should go out as soon as
the engine is started.
If the
vwarning light turns on when the car is travelling (on
some versions there is also the message + symbol on the reconfig-
urable multifunction display), stop the engine immediately and contact
Alfa Romeo Authorised Services.

GETTING TO KNOW YOUR CAR
87
Warning
light on dialMessage
on display
w
LOW BATTERY CHARGE
Turning the key to MARthe warning light on the dial turns on, but it should go out as soon as
the engine is started.
If with the engine running the message + symbol are shown on the reconfigurable multifunction
display, contact Alfa Romeo Authorised Services.
<
SEAT BELTS NOT FASTENED
The warning light on the dial turns on glowing steadily when, with the ignition key turned to
MAR, the driver’s belt is not correctly fastened.

GETTING TO KNOW YOUR CAR
88
´
INCOMPLETE DOOR CLOSING
The warning light on the dial turns on (on some versions the message + symbol are shown on
the reconfigurable multifunction display) when one or more doors or the tailgate are not proper-
ly shut.
Warning
light on dialMessage
on display

GETTING TO KNOW YOUR CAR
89
Warning
light on dialMessage
on display
d
BRAKE PAD WEAR
The warning light on the dial turns on with the brake pedal pressed (on some versions the mes-
sage + symbol are shown on the reconfigurable multifunction display) if the front brake pads are
worn; in this case have them changed as soon as possible.
IMPORTANTAs the car is fitted with wear sensors for the front brake pads, when changing
them, also check the rear brake pads.
AUTOMATIC SELESPEED TRANSMISSION FAILURE
The message and the symbol tappear on the reconfigurable multifunction display when
there is a fault in the Selespeed gearbox. Go to the nearest Alfa Romeo Authorised Service to
have the fault eliminated.

GETTING TO KNOW YOUR CAR
90
Warning
light on dialMessage
on display
U
EOBD ENGINE CONTROL SYSTEM FAILURE
In normal conditions, turning the ignition key to MAR, the warning light turns on, but it should
go off when the engine has started. The initial turning on indicates that the warning light is work-
ing properly.
If the warning light stays on or turns on when travelling (on some versions the message + sym-
bol are shown on the reconfigurable multifunction display):
glowing steadily- means a fault in the supply/ignition system which could cause high emis-
sions at the exhaust, possible lack of performance, poor handling and high consumption levels.
In these conditions it is possible to continue driving without however demanding heavy effort or
high speeds. Prolonged use of the vehicle with the warning light on may cause damage. Contact
Alfa Romeo Authorised Services as soon as possible.
The warning light goes off if the fault disappears, but it is still stored by the system;
flashing- indicates the possibility of damage to catalyst (see “EOBD system” in the chapter).
If the warning light flashes, it is necessary to release the accelerator pedal to lower the speed
of the engine until the warning light stops flashing; continue the journey at moderate speed, try-
ing to avoid driving conditions that may cause further flashing and contact Alfa Romeo Authorised
Services as soon as possible.
If, turning the ignition key to MAR, the Uwarning light does not
turn on or if it turns on glowing steadily or flashing when travelling,
contact Alfa Romeo Authorised Services as soon as possible.