2005 Alfa Romeo 156 maintenance

3
PROTECTING THE ENVIRONMENT
A system for continuously monitoring emission system components to ensure greater environmental protection is fitted in
your car.
ELECTRICAL ACCESSORIES
If, after buying the car, you decide to add electrical accessories (that will gradually drain the battery), contact Alfa Romeo Au-
thorized Services. They can calculate the overall electrical requirement and check that the car’s electric system can support the
required load.
U
CODE CARD
Keep the code card in a safe place, not in the car. You should always keep the electronic code written on the CODE card with
you in case you need to carry out an emergency start-up procedure.
SCHEDULED SERVICING
Correct maintenance of the car is essential for ensuring it stays in tip-top condition and safeguards its safety features, its en-
vironmental friendliness and low running costs for a long time to come.
THE OWNER’S MANUAL CONTAINS…
…information, tips and important warnings regarding the safe, correct driving of your car, and its maintenance. Pay partic-
ular attention to the symbols
"
(personal safety)
#
(environmental protection)
â
(car well-being).

GETTING TO KNOW YOUR CAR32
PRE-TENSIONING DEVICESTo increase the efficiency of the front seat
belts, Alfa 156 is fitted with pre-tension-
ing devices.
These devices “feel” that the car is being
subject to a violent impact by way of a sen-
sor rewind the seat belts a few centimetres.
In this way they ensure that the seat belt
adheres to the wearer before the restraining
action begins.
The seat belt locks to indicate that the de-
vice has intervened; the seat belt cannot be
drawn back up even when guiding it man-
ually.
WARNINGThe pretensioner will give
maximum protection when the seat belt ad-
heres snugly to wearer’s chest and hips.
Front seat pretensioners activate only if
front seat belts are properly fitted into buck-
les. A small amount of smoke may be pro-
duced. This smoke is in no way toxic and
presents no fire hazard.
The emergency tensioning retractor needs
no maintenance or lubrication. Any modifi-
cation to its original features will nullify the
retractor’s effectiveness. If, due to unusual
natural events (floods, high waves, etc.),
the device has been affected by water and
mud, it must be replaced.Operations involving
banging, vibrations or
heating (above 100°C for
a maximum of 6 hours) in the area
of the pretensioners may damage
or trigger off the device. Vibrations
from rough road surfaces or acci-
dental jolting caused by mounting
pavements etc. do not have any ef-
fect on the pretensioner. If, how-
ever, you need assistance, go to
Alfa Romeo Authorized Services.
The pretensioner can only
be used once. After a col-
lision that has triggered it, have it
replaced at Alfa Romeo Authorized
Service. The validity of the device
is written on the plate located on
the front left door near the lock.
Contact Alfa Romeo Authorized
Services to have pretensioner re-
placed as this date approaches.
WARNING
After adjustment, always
check that the slider (B) is
anchored in one of the positions
provided. To do this, with the but-
ton (A-fig. 50) or (A-fig. 51) re-
leased, exert a further pressure to
allow the anchor device to catch if
release did not take place at one of
the preset positions.
WARNING
Make the height adjust-
ment when the car is sta-
tionary.
WARNING

GETTING TO KNOW YOUR CAR64
INFOCENTER DISPLAY(where required)The Infocenter display is able to display all
the useful and necessary information during
driving, in particular:
INFORMATION AVAILABLE ON STANDARD
SCREEN
– Date (A-fig. 87)
– Outside temperature (B)
– Failure and warning symbol (e.g.: pos-
sible presence of ice on the road C).The standard screen will remain on until
a function is activated which requires be-
ing shown on the display (e.g. “Infocenter
display rheostat lights adjustment”).
INFORMATION ABOUT VEHICLE
CONDITION (for each event)
– Scheduled maintenance programme ex-
piry
– Trip computer information
– Rheostat brightness adjustment
– Engine oil level (only JTD versions).
Moreover, a menu is available which al-
lows the driver to perform, by operating the
control buttons (see “Control buttons” in the
next pages) the following controls and set-
tings:Set-up menu
SPEED LIMIT
– Switching on/off the relevant signal
(ON/OFF)
– Speed limit setting
TRIP B ON/OFF
– Switching on/off the relevant function
(ON/OFF)
DATE SETTING/TIME SETTING
– Day setting
– Month setting
– Year setting
– Hour setting
– Minute setting
LANGUAGE SELECTION
– Setting the language for the messages
shown on the displayfig. 87
A0B2126g

GETTING TO KNOW YOUR CAR65
PROGRAMMED MAINTENANCE
– Displaying the expiry date of the next
car service check (strictly related to the
Programmed Maintenance Schedule)
DISPLAY CONTRAST ADJUSTMENT
– Infocenter display graphics brightness
setting (dimming/brightening) UNITS SELECTION
– Selection of the following units: km or
mi (miles), °C or °F, l/100 km or km/l
WARNING/FAILURE BUZZER VOLUME
SETTING
– Volume setting of warning/failure
buzzer
“WINTER” TYRES SPEED LIMIT
– Switching on/off the relevant function
(ON/OFF)
– Setting the limit speed value among the
available ones (160 km/h, 190 km/h
or 210 km/h)DEFAULT VALUE RESET
– Switching on/off the relevant function
(ON/OFF)
EXIT MENU
– Exiting the menu
WARNINGThe use of polarized glasses
may reduce Infocenter display readability.

GETTING TO KNOW YOUR CAR69
The Programmed Maintenance Schedule includes car maintenance every 20,000 km
(or 12,000 miles) or one year; this is shown automatically, with the ignition key at
MAR
,
starting from 2,000 km (or 1,240 miles) or 30 day from this deadline and it is shown again
every 200 km (or 124 miles) or 3 days. When a programmed maintenance interval
(“coupon”) is near to come, turning the ignition key to
MAR
, will display the message
SCHEDULED SERVICE WITHIN followed by the number of kilometers, days or miles to go before
vehicle maintenance. The PROGRAMMED MAINTENANCE message is displayed in km,
mi or days, according to the approaching service interval. At the very moment the value
of 0 km, 0 miles or 0 days is reached, the display will show, every time the ignition key
is turned to
MAR
, the message SCHEDULED SERVICE EXPIRED, followed by the number
of kilometers, miles or days. In this case, to reset this visual information contact
Authorised Alfa Romeo Services.
continued from previous page

GETTING TO KNOW YOUR CAR71
The following refers to the display
(fig. 93) (appearing for about 3 seconds)
with an oil level above the foreseen maxi-
mum. Under this condition the bars are all
full.fig. 93
A0B2136g
Contact Alfa Romeo Au-
thorized Services to have
the engine oil restored to
its correct level.
Restore correct engine oil
level (see paragraph
“Checking fluid levels” in
chapter “Car maintenance”).Do not add oil with dif-
ferent characteristics from
those of the oil already
used in the engine (see “Fluids and
lubricants” in chapter “Car main-
tenance”).

GETTING TO KNOW YOUR CAR82
PROGRAMMED MAINTENANCE (SERVICE)With the SERVICE function it is possible to receive information connected with correct vehi-
cle maintenance. To consult this function, proceed as follows:
Menu screen
Return to menu screenReturn to previously
set screen, e.g:
â
ãSee INITIAL CHECK and ACCESS
TO THE MENU SCREEN
ç
ç
é
â
ãâ
ã
âã
ãâ
âã
â ãâ ã

GETTING TO KNOW YOUR CAR83
The Programmed Maintenance Schedule includes vehicle maintenance
every 20,000 km (or 12,000 miles) or one year; this is shown
automatically, with the ignition key at
MAR
, starting from 2,000
km (or 1,240 miles) or 30 day from this deadline and it is shown
again every 200 km (or 124 miles) or 3 days. When a programmed maintenance interval
(“coupon”) is near to come, turning the ignition key to
MAR
, will display the message
SCHEDULED SERVICE WITHIN followed by the number of kilometers, days or miles to go
before vehicle maintenance. The PROGRAMMED MAINTENANCE message is displayed in km,
mi or days, according to the approaching service interval. At the very moment the value of 0
km, 0 miles or 0 days is reached, the display will show, every time the ignition key is turned
to
MAR
, the message SCHEDULED SERVICE EXPIRED, followed by the number of
kilometers, miles or days. In this case, to reset this visual information contact Authorized Alfa
Romeo Services.
WARNINGProducts shown in the SERVICE screen and to be used for scheduled maintenance could be subject to modifications. Refer to
paragraph “Fluids and lubricants” in section “Technical specifications”.