2005 Acura MDX Owner's Manual

µ
To hear a message again:
Say ‘‘Advisor playback.’’ The
system responds with ‘‘Play or
Resume.’’
If you say ‘‘Play,’’ the message
plays f rom the beginning. If you
say ‘‘Resume,’’ the message plays
f rom the point you previously
stopped it.
Recording a new message will delete
the previous message. Press this button to contact an
OnStar advisor only if you have an
emergency situation. You will hear a
tone, f ollowed by the announcement,
‘‘Connecting to OnStar Emergency.’’
Your call is given highest priority.
The advisor will ask about the nature
of the emergency, locate your
vehicle, and notif y the appropriate
emergency service agencies.
Press the ‘‘phone ’’ button to send
dial tones (example automated
phone systems) while in an OnStar
personal call.
Press the CALL ANSWER/CALL
END button. The system responds
with ‘‘OnStar replay.’’
PressthisCALLANSWER/CALL
END button to end a call to the
OnStar advisor. If the OnStar center
calls you, press this button to answer
the call.
This button is also used to initiate
the Personal Calling and Virtual
Advisor services, if you have
subscribed.Emergency Button
Call A nswer/Call End
Button
Voice A ctivated K eypad
OnSt ar
Features
175

µµ
µ
µ
µ
µ
µ
µ If you are ever in an
accident that causes the airbags to
deploy, the OnStar system
automatically places a call (provided
the OnStar system and your vehicle’s
electrical system are still intact). The
advisor will attempt to speak to you
to evaluate the situation, and contact
the nearest emergency services
provider.
The OnStar
advisor can help you if you are ever
in a minor accident by asking you f or
inf ormation about the accident.
Complete, detailed inf ormation will
make it easier to complete accident
reports and insurance claims.
The OnStar system uses the Global
Positioning System (GPS) to locate
your vehicle whenever you place a
call. This allows the advisor to
quickly contact the nearest services
without requiring you to provide
detailed directions.
Contact
the OnStar advisor if you need
assistance with a problem (f lat tire,
out of f uel, etc.) while traveling. The
advisor will contact an appropriate
agency to come and assist you.
Contact an
OnStar advisor if you have an
emergency situation. The advisor
will contact the nearest emergency
services provider (ambulance, f ire
department, etc.) and advise them of
your situation.
This indicator shows you the status
of the system.
The system is ready
for use.
Acallisin
progress.
There is a problem
with the system. Press the OnStar
button to contact an advisor. If the
call connects, the advisor will assist
you with verif ying the system’s
operation. If you are not able to
contact an advisor, take your vehicle
to an Acura dealer to have the
system diagnosed.
There is a problem
with the system while a call is in
progress. A utomatic Notif ication of A irbag
Deployment
A ccident A ssist
Saf e and Sound Plan Features
Roadside Assistance
Emergency Services
System Status Indicator
Solid Green
Blinking Green
Solid Red
Blinking Red
OnSt ar
176

µµ
µ
µ
µ µ
µ
The OnStar advisor can
give you inf ormation on nearby
hotels, restaurants, ATMs, hospitals,
gas stations, and many other
services in any area you are traveling
in. The advisor can also help you
with hotel or restaurant reservations. If you need a ride
(taxi, limousine service, etc.) the
OnStar advisor can make the
arrangements f or you. Use the
OnStar button, or call
(888) 4-ONSTAR. The OnStar
advisor can give you verbal
directions f rom your current location
to a desired destination. The Directions and Connections
Plan provides these additional
f eatures.
By sending a signal to your
vehicle, the advisor can lock or
unlock your vehicle’s doors. This is
helpfulif youareawayfromyour
vehicle and realize you f orgot to lock
the doors, or if you have locked the
keys in your vehicle. To get OnStar’s
assistance, call (888) 4-ONSTAR
(466-7827).
Using
GPS, OnStar can locate your vehicle
almost anywhere. If your vehicle is
ever stolen, contact OnStar at (888)
4-ONSTAR. The advisor will put you
in contact with the proper authorities,
and assist them with locating your
vehicle. If you are unable to locate your
vehicleinalargeparkinglotor
parking structure, contact OnStar at
(888) 4-ONSTAR. The advisor will
remotely activate the exterior lights
and the horn, allowing you to locate
your vehicle.
From your computer, you can log
into www. myonstar.com to make
dinner reservations, purchase tickets
to events, send f lowers, etc.
Inf ormation and Convenience
Services Ride Assist Route Support Directions and Connections Plan
Features
Remote Door L ocking/Unlocking
Stolen Vehicle T racking Misplaced Vehicle Assistance
Online Concierge Services
OnSt ar
Features
177

µµ
The Luxury and Leisure plan
provides all the benef its of the other
plans, and adds:
An OnStar advisor can assist you
with purchasing theater tickets,
airline tickets, rental car reservations
for a vacation, and just about any
other purchase you desire. The OnStar Personal Calling plan is
an extra-cost option that gives you
the ability to use your vehicle’s
OnStar system as a hands-f ree
cellular telephone.
To sign up f or Personal Calling,
press the OnStar button in your
vehicle, and notify the advisor that
you’d like to sign up. The advisor will
get all the information needed to set
up your account, and provide you
with your new cellular telephone
number.
You will need to provide a credit card
number, and prepurchase ‘‘units’’ or
minutes of air time (one unit equals
1 minute). You
must use voice commands to give
the OnStar system your calling
inf ormation. To make a phone call:
Press the CALL ANSWER/CALL
END button.
OnStar will respond with ‘‘Dialing.’’
It will then place the telephone call.
When you have f inished your
conversation, press the CALL
ANSWER/CALL END button
again to hang up. Say ‘‘Yes’’ to dial the number, or
‘‘No’’ to try again. OnStar will repeat the number,
andthensay‘‘YesorNo.’’ Say the entire number without
pausing. OnStar will respond with ‘‘Phone
number to dial, please.’’ Say ‘‘Dial.’’
OnStar will respond with ‘‘OnStar
ready.’’
Luxury and Leisure Plan
Features
Personal Concierge Services
Personal Calling
Placing a Telephone Call
OnSt ar
178

If you need to cancel the phone call
attempt bef ore entering the
complete phone number, say ‘‘Cancel.’’
The system will cancel the operation
and return to Ready.You can also enter the number one
digit at a time. To make a phone call:
If you make a mistake speaking a
digit of the phone number, or the
system responds with the wrong
digit, say ‘‘Clear.’’ This will cause the
system to erase the last digit.
If you make a mistake speaking the
phone number, or the system
responds with the wrong number,
say ‘‘Clear.’’ This will cause the
system to erase the number.
If you need to cancel the phone call
attempt bef ore entering the
complete phone number, say ‘‘Cancel.’’
The system will cancel the operation
and return to Ready.
Press the CALL ANSWER/CALL
END button.
When you have f inished your
conversation, press the CALL
ANSWER/CALL END button
again to hang up. OnStar will respond with ‘‘Dialing.’’
It will then place the telephone call. Continue this until you have given
OnStar the complete telephone
number. Then say ‘‘Dial.’’ OnStar will repeat that digit. Say the second digit of the number. OnStar will repeat that digit.
Always wait f or OnStar to conf irm
the digit bef ore going to the next
digit. Say the f irst digit of the number. OnStar will respond with ‘‘First
digit to dial, please.’’ Say ‘‘Digit dial.’’
OnStar will respond with ‘‘OnStar
ready.’’
CONT INUED
OnSt ar
Features
179

µµ
µ µµ
If the system has difficulty
understanding a voice command, it
canrespondwith:
‘‘Pardon’’ The system could not
match your voice command to one it
knows. Repeat the command
distinctly.
‘‘Slower please’’ The system
missed the command because it was
not ready for it, or there was too
much background noise. Repeat the
command after a short pause.
You
cansenddialtonesduringOnStar
Personal Calling. While in a personal call, press the
Voice Activated Key-Pad Button.
OnStar will respond with ‘‘First
digit to send please.’’
Say the f irst digit of the number
you want to send.
OnStar will repeat that digit.
Always wait f or OnStar to conf irm the digit bef ore going to the next
digit.
OnStar will repeat that digit.
Say the second digit of the number.
Continue this until you have given
OnStar the complete number.
Then say ‘‘Send.’’ OnStar will send
the number by dial tones.
When someone places a telephone
call to you, the audio system will
mute and you will hear the ring.
Press the CALL ANSWER/CALL
END button to answer the call.
When you have completed the call,
press the CALL ANSWER/CALL
END button again to hang up.
The OnStar system can store up to
twenty 32-digit telephone numbers in
its memory. When you store these
numbers in its memory, you give
each one a nametag. When you want
to place a telephone call, you can recall the number by giving the
system the nametag.
To store a
telephone number and its nametag in
the system:
Say the name that you want
assigned to that telephone number. OnStar will respond with ‘‘Name
tag, please.’’ Say ‘‘Yes,’’ or say ‘‘No’’ to try again.
OnStar will repeat the number,
andthensay‘‘YesorNo.’’ Say the entire number.
OnStar will respond with ‘‘Phone
number to store, please.’’ Say ‘‘Store.’’ OnStar will respond with ‘‘Ready.’’ Press the CALL ANSWER/CALL
END button.
Voice A ctivated K ey-Pad Incoming T elephone Calls
Using NametagsStoring a Nametag
OnSt ar
180

µ
»¼
»¼
µ
»¼ »¼
»¼ To delete a
name tag and telephone number
f rom memory:
OnStar will respond with ‘‘Ready.’’
Say ‘‘Delete.’’
OnStar will respond with ‘‘Name
tag, please.’’
Say the name tag f or the number
you want to delete.
OnStar will respond with ‘‘Deletename tag , Yes or No.’’
Say ‘‘Yes.’’
OnStar will respond with ‘‘Deleting name tag .’’
To
place a telephone call using a name
tag:
You can also store a telephone
number and its name tag one digit at
a time. To store them in the system:
Press the VOICE ACTIVATED
KEYPAD button.
Say ‘‘New nametag.’’ OnStar will respond with ‘‘Name
tag, please.’’ Continue this until you have given
OnStar the complete telephone
number. Then say ‘‘Store’’ again. Say the second digit of the number. OnStar will repeat that digit.
Say the f irst digit of the number. OnStar will respond with ‘‘First
digit to store, please.’’ Say ‘‘Digit store.’’
OnStar will respond with ‘‘OnStar
ready.’’
(or ‘‘No’’ to try again)
OnStar will respond with ‘‘Storingnametag .’’ Press the CALL ANSWER/CALL
END button.
If you have forgotten what name
tags you have stored, the system will
read them to you. Press the CALL
ANSWER/CALL END button. When
the system responds with ‘‘Ready,’’
say ‘‘Directory.’’ OnStar will respond with ‘‘Calling
name tag ,’’ then place the
telephone call. Say the name tag f or the number
you want to call. OnStar will respond with ‘‘Name
tag, please.’’ Say ‘‘Call.’’ OnStar will respond with ‘‘Ready.’’ Press the CALL ANSWER/CALL
END button.
OnStar will respond with ‘‘Store new nametag , Yes or No.’’
Say ‘‘Yes.’’
CONT INUED
Deleting a Name tag
Placing a Telephone Call
OnSt ar
Features
181

µµ
»¼
To redial
the last telephone number you
called:
OnStar will respond with ‘‘Ready.’’
Say ‘‘Redial.’’
OnStar will respond with
‘‘Redialing,’’ then place the
telephone call.
By giving the system a security code
that you make up, you can lock out
the Personal Calling and Virtual
Advisor capabilities of the system so
unauthorized people cannot make
telephone calls. To turn security on
or of f :
You can also call OnStar at
(888) 4-ONSTAR, or get inf ormation
about your account at the OnStar
web site, www.onstar.com.To purchase more
units of cellular air time:
To f ind out how many units you have
remaining: You must prepurchase units
(minutes) of cellular air time. The
OnStar system tracks how many
units you have remaining. If you f orget the security code
entered, or someone else enters a
security code unknown to you, you
must contact an OnStar advisor to
reset the code. Press the OnStar
button, or call (888) 4-ONSTAR.
Press the CALL ANSWER/CALL
END button.
Press the CALL ANSWER/CALL
END button.Press the CALL ANSWER/CALL
END button.
It is also possible to press the
Onstar button and talk to an
advisor to purchase more air time. OnStar will connect you to an
automated system to handle your
purchase. Say ‘‘Add.’’ OnStar will respond with ‘‘Verif y
or add.’’ Say ‘‘Units.’’
OnStar will respond with ‘‘OnStar
ready.’’ OnStar will respond with ‘‘You
have number units remaining.’’ Say ‘‘Verif y.’’
OnStar will respond with ‘‘Verif y
or add.’’ Say ‘‘Units.’’
OnStar will respond with ‘‘Ready.’’
Press the CALL ANSWER/CALL
END button. OnStar will respond with ‘‘Security
is ON/OFF.’’ Say the f ourth digit of the code. OnStar will repeat that digit.
Say the third digit of the code.
OnStar will repeat that digit.
Say the second digit of the code.
OnStar will repeat that digit.
Say the f irst digit of the code.
OnStar will respond with ‘‘First
digit of security code, please.’’ Say ‘‘Security.’’
OnStar will respond with ‘‘OnStar
ready.’’
Redialing a Number
A dding Units
K eeping T rack of Units
Security Code
OnSt ar
182