2005.5 Citroen XSARA PICASSO DAG warning

3
2
1
0
4
I N B R I E F
I14
Windscreen wiper stalk
3 Fast speed
2 Normal speed
1 Intermittent or automatic wipe
0 Stop
4 Single wipe – Press the stalk downwards
Vehicle not tted with a rain sensor.Position 1: The timing of the in-termittent wipe adjusts automati-cally to the speed of the vehicle.Note: In position 2 or 3: when stationary, the windscreen wiper speed automatically reduces.
For safety, the wiper sys-
tem is deactivated when
the ignition is switched off.
Vehicle tted with a rain sen-sor.Position 1: Intermittent wipe in-tervals adjust automatically ac-cording to rain intensity.Note: In position 2 or 3: when sta tionary, the windscreen wiper speed automatically reduces.
For safety, the wiper system is deactivated when the ignition is switched off.
When switching the ignition on, to reactivate the function:- return to the Stop position,- change to the desired posi-tion.
The activation of the function is signalled by one wipe.
WARNING:
Do not cover the rain sensor,
which is situated at bottom cen-
tre of the windscreen and visible
from the driving position.
Advice
Washing the vehicle: switch off the ignition.
A sound alert (beep) accom-panied by a message when you activate the automatic wipe mode, indicates that this system is malfunctioning.
Advice
The windscreen wipers can be stopped in maintenance position (forrepairs).
For this, switch off ignition, push the wash/wipe control stalk downwards.
To return to the stop position, simply move the stalk again.
14V I S I B I L I T Y

2
3
I N B R I E F
I21
63
V E N T I L A T I O N – H E A T I N G
M A N U A L A I R C O N D I T I O N I N G
Air conditioning
The air conditioning only operates when the engine is running.
Press the switch on the dashboard.
Warning lamp on = in operation
Entry of exterior air
Air recirculation
This position prevents the entry of unpleasant odours into the vehicle.
It should be cancelled as soon as possible to renew the air in the passenger compartment as well as to allow demisting.
To enhance the effi ciency and rapidity of the air conditioning in very hot weather, use the air recirculation position.
Move the control 2 fully to the right and pla-ce the air blower control 3 in an intermediate position.
This function should be cancelled when it is no longer needed, to allow renewal of the air in the cabin.
Deicing – demisting of the windscreen and front side windows
- Place the controls for temperature and air flow on maximum,
- close the central air vents,
- operate the air conditioning.
Note : you should not be in Air Recirculation.

2
3
18
7
65
4
910
64A U T O M A T I C T E M P E R A T U R E
R E G U L A T I O N
1 - Automatic operation
This is the optimal and normal mode
for using the air conditioning system
to ensure a circulation of air suf cient to maintain a good level of comfort.
A press on the control for this, con rmed by
the display of « AUTO », provides automatic
operation at the selected temperature of the
following 5 functions :
- Air ow.
- Cabin temperature.
- Air distribution.
- Air conditioning.
- Air recirculation. Is is advised to keep all the air vents open.Notes :
- When starting the engine from cold, in order to prevent an unwanted rush of cold
air, the blower attains its optimum level only
progressively. - When you are entering the vehicle after a fairly prolon-
ged stop and the temperature inside the cabin is far
colder (or far hotter) than would be comfortable, it is
no use altering the displayed temperature to try to res-
tore the desired comfort level more rapidly. The system
automatically strives to compensate this temperature
discrepancy as rapidly as possible.
2- Adjustment of temperature
To display the desired temperature,
press one of the buttons :
To increase the temperature
To decrease the température
Display of the temperature requested for the cabin
A setting close to 21 will provide a good comfort l evel.
Manual resumption of one or more functions
It is possible to adjust any of the following functions
manually, while retaining all the other functions in
automatic mode. The warning lamp for the «AUTO»
function will then go out.IIIIII

65IIIIIIA U T O M A T I C T E M P E R A T U R E R E G U L A T I O N
3 - Display
4 - Air conditioning
Warning lamp « A/C » or « AUTO » is illuminated.
If you press on the button, you see « ECO » displayed,
the air conditioning is stopped, « A/C » or « AUTO »
disappears.
To prevent misting inside the vehicle in either cold or
humid weather, you are advised to use AUTO mode
and to avoid ECO mode.
5 - Air recirculation
If you press on this button, the intake of air from
outside is closed off, as confirmed by the display.
This position enables you to exclude any
unpleasant odours or fumes comng from outside. It s hould
be cancelled as soon as possible to allow renewal of
cabin air and to prevent misting.
For this, press on the button « AUTO ». 6- Air distributor
Press on the button for successive display of air
flows to :
Windscreen.
Windscreen and passenger footwells.
Passenger footwells.
Central and lateral air vents and
passenger footwells.
Central and lateral air vents.

66A U T O M A T I C T E M P E R A T U R E
R E G U L A T I O N
7- Air fl ow
To adjust the air blower speed. Press on the button :
To increase it.
To decrease it.
It is not possible to stop the blower via this
control.
8 - Demisting - Deicing
This button is for rapid deicing or demisting of th e
windscreen, acting automatically on the air blower
speed, the air distribution, the air conditioning a nd
the air intake.
N ot e : for great er effect iven ess, close t h e cen t ral
an d lat eral air ven t s. 9- Deicing of the rear screen
This button is for deicing or demisting of the rear
screen and rear view mirrors. 10 - To close down the system
To close down all the functions of the automatic
system, press the « OFF » button.
The ventilation and the air conditioning will no lo nger
operate, there will be no display on the screen.
The passenger compartment will not be heated.
To reactivate the system
Press on the buttons « AUTO » or « Demisting -
deicing » , the warning lamp for the « OFF » button will
go out (the other buttons are inactive).
To return to automatic operation, press the button AUTO.
III

2
successive presses on the end of the wiper control at the steering wheel).
Press for at least two seconds :display disappears.
One press on any button brings the display back.
Escape button: Esc
Short press: cancels the current operation or warning message and returns you to the previous menu.
Press for at least two seconds :return to the main menu.
This button can be used to exit from any menu.
Menu button: menu
This button gives access to the main menu.
It can be used at any time.
Introduction
The On-board Navigation system guides you to the destination of your choice, by means of voice messages and visual instructions.
The system uses a cartographic database and GPS satellite guidance, the latter enabling your position to be plotted by means of several satellites.On-board Navigation comprises the following components:
- the remote control,
- the control panel display,
- the electronic control unit,
- the CD Rom,
- the last voice message recall command,
- the satellite receiver aerial.
Speci c functions or services may vary depending on the CD ROM version or on the country where the system is to be used.
For safety reasons, drivers are recommended not to use the remote control when the vehicle is moving, but to park safely and legally before modifying parame-ters or inputting data.
The system may be affected by disturbance or interruption in certain conditions (for example under bridges or in underground car parks, etc.).
The remote control
When pointed towards the right hand screen, the remote control allows you to select the information contained in the different displays.
Direction arrows :
These allow you to move around the screen and thus to choose functions.
Validate button: VAL
Validates the function or letter chosen.
Enables you, during navigation , to access the Rapid Tools menu.
Mode button: MOD
Short press: each successive press allows you to select from the types of information permanently displayed on the right hand side of the screen: date, navigation, trip computer and audio system (trip computer infor-mation can also be accessed by
T H E O N - B O A R D N A V I G AT I O N S Y S T E M

234561123
32145
8977
3
The display
When driving, the display indicates:
1 status of the central locking.
2 status of the child locks.
3 last mode used, radio, CD, CD 3changer, on-board computer, etc.
4 the date.
5 exterior temperature.
6 the time.
When menus are in use, a variety of tabs will appear at the bottom of the screen, denoting access to the diffe-rent functions
1 Function selected (highlighted).
2 Function inaccessible in this situa-tion (dotted outline).
3 Function accessible (plain outline).3
Use the direction arrows to move between tabs.
While using On-board Navigation, the screen displays various types of information according to the manoeuvres to be carried out:
1 Manoeuvre to be carried out.
2 Distance to the next manoeuvre.
3 Next manoeuvre to be carried out.3
4 Next road to take.
5 Road currently being taken.
6 The time.
7 Exterior temperature.
8 Distance to fi nal destination.
9 Visual warning indicating that the voice messaging is deactivated.
Enter city
City:RAMBOUILLET
Correction List 37844 Change
T H E O N - B O A R D N A V I G AT I O N S Y S T E M

1
2
3
4
4
The electronic control unit
This is located inside the boot on the left hand side.
To gain access, turn the buttons one quarter turn.
1 CD Rom eject button.
2 CD Rom compartment.
3 The ON warning lamp indicates that the control unit is supplied with power.
4 The CD warning lamp indicates the presence of a CD ROM in the control unit.
The CD-ROM
It contains all the cartographic data on the country chosen.
It must be inserted with the printed face upwards.
The last voice message recall command
During navigation, a press on the end of the headlamp control repeats the last voice message.
During the course of a message, the volume can be regulated using the radio volume adjustment button or its counterpart at the steering wheel.
Note: the message volume is not linked to the radio or traffi c infor-mation volume.
T H E O N - B O A R D N A V I G AT I O N S Y S T E M