CHAPTER 1
GENERAL INFORMATION
MOTORCYCLE IDENTIFICATION1-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
VEHICLE IDENTIFICATION NUMBER 1-1. . . . . . . . . . . . . . . . . . . . . . . .
MODEL LABEL 1-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
FEATURES1-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
INSTRUMENT FUNCTIONS 1-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
IMPORTANT INFORMATION1-6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PREPARATION FOR REMOVAL AND DISASSEMBLY 1-6. . . . . . . . .
REPLACEMENT PARTS 1-6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
GASKETS, OIL SEALS AND O-RINGS 1-6. . . . . . . . . . . . . . . . . . . . . . .
LOCK WASHERS / PLATES AND COTTER PINS 1-7. . . . . . . . . . . . . .
BEARINGS AND OIL SEALS 1-7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CIRCLIPS 1-7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CHECKING THE CONNECTIONS1-8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SPECIAL TOOLS1-9 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CHAPTER 2
SPECIFICATIONS
GENERAL SPECIFICATIONS2-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ENGINE SPECIFICATIONS2-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CHASSIS SPECIFICATIONS2-11 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ELECTRICAL SPECIFICATIONS2-15 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CONVERSION TABLE2-18 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
GENERAL TIGHTENING TORQUE SPECIFICATIONS2-18 . . . . . . . . . . . .
TIGHTENING TORQUES2-19 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ENGINE TIGHTENING TORQUES 2-19. . . . . . . . . . . . . . . . . . . . . . . . . . .
CHASSIS TIGHTENING TORQUES 2-23. . . . . . . . . . . . . . . . . . . . . . . . . .
LUBRICATION POINTS AND LUBRICANT TYPES2-25 . . . . . . . . . . . . . . .
ENGINE 2-25. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CHASSIS 2-26. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
COOLING SYSTEM DIAGRAMS2-27 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ENGINE OIL LUBRICATION CHART2-29 . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ProCarManuals.com
2-2
ENGINE SPECIFICATIONSSPEC
2
ENGINE SPECIFICATIONS
ItemStandardLimit
Engine
Engine type
Displacement
Cylinder arrangement
Bore stroke
Compression ratio
Engine idling speed
Vacuum pressure at engine idling
speed
Standard compression pressure
(at sea level)
Liquid-cooled, 4-stroke, DOHC
998 cm3 (60.90 cu.in)
Forward-inclined parallel 4-cylinder
77.0 53.6 mm (3.03 2.11 in)
12.4 : 1
1,150 1,250 r / min
22 kPa (165 mmHg, 6.5 inHg)
1,480 kPa (14.80 kg / cm
2,14.80 bar,
210.5 psi) at 350 r / min
Fuel
Recommended fuel
Fuel tank capacity
Total (including reserve)
Reserve only
Premium unleaded gasoline only
18 L (3.96 Imp gal, 4.76 US gal)
3.4 L (0.75 Imp gal, 0.90 US gal)
Engine oil
Lubrication system
Recommended oil
Quantity
Total amount
Without oil filter cartridge
replacement
With oil filter cartridge replacement
Oil pressure
Engine oil temperature
Relief valve opening pressure
Wet sump
At 5C (40F) or higher
Yamalube 4 (20W40) or SAE 20W40
type SE motor oil
At 15C (60F) or lower
Yamalube 4 (10W30) or SAE 10W30
type SE motor oil
3.8 L (3.35 Imp qt, 4.02 US qt)
2.9 L (2.55 Imp qt, 3.07 US qt)
3.1 L (2.73 Imp qt, 3.28 US qt)
230 kPa at 5,000 r / min
(2.3 kg / cm
2 at 5,000 r / min)
(2.3 bar at 5,000 r / min)
(32.7 psi at 5,000 r / min)
100C (212F)
600 680 kPa (6.0 6.8 kg / cm
2,
6.0 6.8 bar, 87.0 98.6 psi)
ProCarManuals.com
2-14
CHASSIS SPECIFICATIONSSPEC
ItemStandardLimit
Steering
Steering bearing type
Angular bearing
Lock to lock angle (left)
Lock to lock angle (right)27
27
Rear suspension
Suspension type
Rear shock absorber assembly
type
Rear shock absorber assembly
travel
Spring
Free length
Installed length
Spring rate (K1)
Spring stroke (K1)
Optional spring available
Standard spring preload gas / air
pressure
Spring preload adjusting positions
Minimum
Standard
Maximum
Rebound damping adjusting
positions
Minimum*
Standard*
Maximum*
Compression damping adjusting
positions
Minimum*
Standard*
Maximum*
*from the fully turned-in position
Swingarm (link suspension)
Coil spring / gas-oil damper
65 mm (2.56 in)
173.5 mm (6.83 in)
163.5 mm (6.44 in)
83.4 N / mm (8.50 kg / mm, 476.21 lb / in)
0 65 mm (0.00 2.56 in)
No
1,200 kPa (12 kg / cm
2, 12 bar, 171 psi)
1
4
9
20
17
1
20
12
1
Swingarm
Free play (at the end of the
swingarm)
Radial
Axial
1.0 mm
(0.04 in)
1.0 mm
(0.04 in)
Drive chain
Model (manufacturer)
Link quantity
Drive chain slack
Maximum ten-link section
50VA8 (DAIDO)
11 6
25 35 mm (0.98 1.38 in)
150.1 mm
(5.91 in)
ProCarManuals.com
