2004 YAMAHA YZF-R1S ad blue

8-33
LIGHTING SYSTEMELEC
EAS00791
4. The auxiliary light fails to come on.
YESNO 1. Auxiliary light and socket

Check the auxiliary light bulb and socket for
continuity.
Refer to “CHECKING THE BULBS AND
BULB SOCKETS”.

Are the auxiliary light .bulb and socket OK?
Replace the auxiliary
light bulb, socket or
both.
YESNO 2. Voltage

Connect the pocket tester (DC 20 V) to the
auxiliary light coupler (auxiliary light side) as
shown.
The wiring circuit
from the main switch
to the auxiliary light
coupler is faulty and
must be repaired. Positive tester probe
blue / red
Negative tester probe
black
1

Turn the main switch to “ON”.

Measure the voltage (DC 12 V) of blue / red
on the auxiliary light coupler (auxiliary
light side).

Is the voltage within specification?
2
This circuit is OK.
2
5. The turn signa l/ position light fails to come on.
YESNO 1. Turn signal / position light and socket

Check the turn signal / position light bulb and
socket for continuity.
Refer to “CHECKING THE BULBS AND
BULB SOCKETS”.

Are the turn signal / position light bulb and
socket OK?
Replace the turn sig-
nal / position light
bulb, socket or both.
YESNO 2. Voltage

Connect the pocket tester (DC 20 V) to the
turn signal / position light coupler (wire har-
ness side) as shown.
The wiring circuit from
the main switch to the
turn signal / position
light coupler is faulty
and must be repaired.
Turn the main switch to “ON”.

Measure the voltage (DC 12 V) of blue or
blue on the turn signal / position light cou-
pler (wire harness side).

Is the voltage within specification?
3
This circuit is OK.
Left turn signal / position light
Positive tester probe
blue
Negative tester probe
black
Right turn signal / position light
Positive tester probe
blue
Negative tester probe
black
1
2
A
Left turn signal / position light
Right turn signal / position light
B
A
B
3
4
1
ProCarManuals.com

8-39
SIGNALING SYSTEMELEC
C
YESNO
The wiring circuit
from the turn signal
switch to the turn sig-
nal light connector is
faulty and must be
repaired. Left turn signal / position light
Positive tester probe
chocolate
Negative tester probe
ground
Right turn signal / position light
Positive tester probe
dark green
Negative tester probe
ground
1
2

Turn the main switch to “ON”.

Set the turn signal switch to “ ” or “ ”.

Measure the voltage (DC 12 V) of the choco-
late or dark green at the turn signal light
connector (wire harness side).

Is the voltage within specification?
12
This circuit is OK.
AB
1. Neutral indicator light (LEDs)

Check the neutral indicator light for continu-
ity.
Refer to “CHECKING THE LEDs”.

Are the neutral indicator light OK?
EAS00801
4. The neutral indicator light fails to come on.
YESNO
Replace the meter
assembly.
YESNO 2. Neutral switch

Check the neutral switch for continuity.
Refer to “CHECKING THE SWITCHES”.

Is the neutral switch OK?
Replace the neutral
switch.
3. Starting circuit cut-off relay (diode)

Disconnect the starting circuit cut-off relay
coupler from the wire harness.

Connect the pocket tester (Ω
1) to the
starting circuit cut-off relay coupler as
shown.

Check the starting circuit cut-off relay for
continuity.
Positive tester probe

blue / yellow
Negative tester probe

sky blue Continuity
Positive tester probe

sky blue
Negative tester probe

blue / yellow No
continuity
1
2
2
1
EAS00753
5. Voltage

Connect the pocket tester (DC 20 V) to the
turn signal light connector or meter assem-
bly coupler (wire harness side) as shown.
Left turn signal light
Right turn signal light
Turn signal indicator light
A
B
C
ProCarManuals.com

8-42
SIGNALING SYSTEMELEC
YESNO 2. Voltage

Connect the pocket tester (DC 20 V) to the
meter assembly coupler (wire harness side)
as shown.
The wiring circuit
from the main switch
to the meter assem-
bly coupler is faulty
and must be re-
paired. Positive tester probe
green / white
Negative tester probe
black / white
1
2

Turn the main switch to “ON”.

Measure the voltage (DC 12 V) of
green / white and black / white at the
meter assembly coupler.

Is the voltage within specification?
This circuit is OK.
12
Replace the multi-
function meter.
NO
1. Multi-function meter bulb socket

Check the multi-function meter bulb socket
for continuity.
Refer to “CHECKING THE BULBS AND
BULB SOCKETS”.

Is the multi-function meter bulb socket OK?
YES
EAS008067. The speedometer fails to come on.
2. Speed sensor

Connect the pocket tester (DC 20 V) to the
speed sensor coupler (wire harness side)
as shown.
Replace the speed
sensor.
NOYES
Positive tester probe
white / yellow
Negative tester probe
black / blue1
2

Set the main switch to “ON”.

Elevate the rear wheel and slowly rotate it.

Measure the voltage (DC 5 V) of white / yel-
low and blue. With each full rotation of the
rear wheel, the voltage reading should cycle
from 0.6 V to 4.8 V to 0.6 V to 4.8 V.

Does the voltage reading cycle correctly?
This circuit is OK.
ProCarManuals.com

8-46
YESNO
4. Radiator fan motor

Disconnect the radiator fan motor coupler
from the wire harness.

Connect the battery (DC 12 V) as shown.
The radiator fan mo-
tor is faulty and must
be replaced.
Positive battery lead
blue
Negative battery lead
black1
2

Does the radiator fan motor turn?
5. Radiator fan motor relay

Disconnect the radiator fan motor relay
form the wire harness.

Connect the pocket tester (Ω
1) and bat-
tery (12 V) to the radiator fan motor terminal
as shown.

Check the radiator fan motor for continuity.
Replace the radiator
fan motor relay.
NOYES
Battery positive terminal
red / white
Battery negative terminal

green / yellow 1
2

Does the radiator fan motor relay have conti-
nuity between red and brown / green?
Tester positive probe
red
Tester negative probe
brown / green3
4
COOLING SYSTEMELEC
EAS00809
ProCarManuals.com

8-51
FUEL PUMP SYSTEMELEC
YESNO 5. Starting circuit cut-off relay (fuel injection
system relay)

Disconnect the starting circuit cut-off relay
coupler from the wire harness.

Connect the pocket tester (Ω
1) and bat-
tery (12 V) to the starting circuit cut-off relay
coupler as shown.
Replace the starting
circuit cut-off relay.
Positive battery lead
red / black
Negative battery lead
blue / yellow 1
2
Positive tester probe
red
Negative tester probe
red / blue3
4

Does the starting circuit cut-off relay have
continuity between red and red / blue?
YESNO 6. Fuel pump resistance

Disconnect the fuel pump coupler from the
wire harness.

Connect the pocket tester (Ω
1) to the fuel
pump coupler as shown.
Properly connect or
repair the fuel sys-
tem’s wiring.
1
2
Positive tester probe
red / blue
Negative tester probe
black
EAS00817
YESNO Fuel pump resistance
0.2  3.0 Ω at 20C (68F)

Is the fuel pump OK?
Replace the fuel
pump.

Measure the fuel pump resistance.
7. Wiring

Check the entire fuel pump system’s wiring.
Refer to “CIRCUIT DIAGRAM”.

Is the fuel system’s wiring properly con-
nected and without defects?
EAS00818
Replace the ECU.
EAS00759
ProCarManuals.com

8-52
FUEL PUMP SYSTEMELEC
WARNING
EAS00819
CHECKING THE FUEL PUMP
Gasoline is extremely flammable and under
certain circumstances there can be a danger
of an explosion or fire. Be extremely careful
and note the following points:

Stop the engine before refueling.

Do not smoke, and keep away from open
flames, sparks, or any other source of fire.

If you do accidentally spill gasoline, wipe it
up immediately with dry rags.

If gasoline touches the engine when it is
hot, a fire may occur. Therefore, make sure
the engine is completely cool before per-
forming the following test.
1. Check:

Fuel pump operation
a. Insert the plug
1 to fuel return hose end.
b. Fill the fuel tank.
c. Put the end of the fuel hose into an open con-
tainer.
d. Connect the battery (DC 12 V) to the fuel
pump coupler as shown.
Positive battery lead
red / blue
2
Negative battery lead
black 3
e. If fuel flows out of the fuel hose, the fuel pump
is OK. If fuel does not flow, replace the fuel
pump.
ProCarManuals.com

59Clutch switch
60Turn signal switch
61Horn
62Front turn signal / position light (left)
63Front turn signal / position light (right)
64Rear turn signal light (left)
65Rear turn signal light (right)
66Headlight
67Auxiliary light
68License plate light
69Rear brake light switch
70Tail / brake light
71Headlight relay (on / off)
72Headlight relay (dimmer)
73Fuse (ignition)
74Fuse (signal)
75Fuse (headlight)
76Radiator fan motor relay
77Fuse (radiator fan motor left)
78Fuse (radiator fan motor light)
79Radiator fan motor 2
80Radiator fan motor 1
81Ground
COLOR CODE
B Black. . . . .
Br Brown. . . .
Ch Chocolate. . .
Dg Dark green. . .
G Green. . . .
Gy Gray. . .
L Blue. . . . .
Lg Light green. . . .
O Orange. . . .
P Pink. . . . .
R Red. . . . .
Sb Sky blue. . . .
W White. . . .
Y Yellow. . . . .
B / G Black / Green. .
B / L Black / Blue. . .
B / R Black / Red. .
B / W Black / White. .
B / Y Black / Yellow. .
Br / G Brown / Green.
Br / L Brown / Blue. .
Br / R Brown / Red. .
Br / W Brown / White.
G / B Green / Black. .
G / R Green / Red. .
G / W Green / White. . G / Y Green / Yellow. .
Gy / B Gray / Black.
Gy / G Gray / Green.
Gy / R Gray / Red.
L / B Blue / Black. . .
L / R Blue / Red. .
L / W Blue / White. .
L / Y Blue / Yellow. . .
O / B Orange / Black. .
O / G Orange / Green. .
P / W Pink / White. .
R / B Red / Black. .
R / G Red / Green. .
R / L Red / Blue. .
R / W Red / White. .
R / Y Red / Yellow. .
Sb / W Sky blue / White.
W / B White / Black. .
W / R White / Red. .
W / Y White / Yellow. .
Y / B Yellow / Black. .
Y / G Yellow / Green. .
Y / L Yellow / Blue. . .
Y / R Yellow / Red. .
Y / W Yellow / White. .
YZF-R1S / YZF-R1SC WIRING DIAGRAM
1Main switch
2A.C. magneto
3Rectifier / regulator
4Fuse (main)
5Fuse (backup)
6Battery
7Fuse (fuel injection)
8Starter relay
9Starter motor
10Starting circuit cut-off relay
11Neutral switch
12Sidestand switch
13Fuel pump
14E.C.U
15Ignition coil #1
16Ignition coil #2
17Ignition coil #3
18Ignition coil #4
19Spark plug
20Injector #1
21Injector #2
22Injector #3
23Injector #4
24Air induction system solenoid
25Sub-throttle position sensor
26EXUP servo motor
27Speed sensor
28Coolant temperature sensor
29Intake air temperature sensor
30Option switch
31Crankshaft position sensor
32Throttle position sensor
33Intake air pressure sensor
34Atmospheric pressure sensor
35Cylinder identification sensor
36Lean angle cut-off switch
37Meter assembly
38Fuel level warning light
39Oil level warning light
40Neutral indicator light
41Tacho meter
42Shift timing indicator light
43Multi function meter
44Engine trouble warning light
45Coolant temperature indicator light
46Hi beam indicator light
47Turn signal indicator light (left)
48Turn signal indicator light (light)
49Meter light
50Oil level switch
51Right handlebar switch
52Front brake light switch
53Engine stop switch
54Start switch
55Turn signal relay
56Left handlebar switch
57Dimmer switch
58Horn switch
ProCarManuals.com