PERIODIC MAINTENANCE AND MINOR REPAIR
6Engine overheating
EW000070
•Do not remove the radiator cap when the engine and radiator are hot. Scalding hot fluid and steam may be
blown out under pressure, which could cause serious injury. Be sure to wait until the engine has cooled.
•After removing the radiator cap retaining bolt, place a thick rag, like a towel, over the radiator cap, and then
slowly rotate the cap counterclockwise to the detent to allow any residual pressure to escape. When the hissing
sound has stopped, press down on the cap while turning it counterclockwise, and then remove the cap.
WARNING
NOTE :
If coolant is not available, tap water can be temporarily used instead, provided that it is changed to the recommended
coolant as soon as possible.
Wait until the
engine has cooled.Check the coolant level in the
reservoir and radiator.
The coolant level
is OK.
The coolant level is low.
Check the cooling system
for leakage.
Have a Yamaha dealer checkand repair the cooling system.
Add coolant. (See NOTE.)
Start the engine. If the engine overheats again, have a
Yamaha dealer check and repair the cooling system.
There is
leakage.
There is
no leakage.
6-37
INDEX
Storage compartments ...................... 3-12
T
Tail/brake light bulb or rear turn
signal light bulb, replacing ............ 6-34
Throtlle cable free play, adjusting ...... 6-20
Throttle grip and cable,
checking and lubricating .............. 6-26
Tires .................................................. 6-21
Tool kit ................................................. 6-1
Troubleshooting ................................. 6-35
Troubleshooting charts ...................... 6-36
Turn signal light bulb (front),
replacing ...................................... 6-34
V
Valve clearance, adjusting ................ 6-21
Vehicule identification number ............ 9-1
W
Wheel bearing, checking ................... 6-29
Wheels .............................................. 6-23 Luggage hook ................................... 3-15
M
Main switch/steering lock .................... 3-1
Model label .......................................... 9-2
Multi-function display .......................... 3-4
P
Parking ................................................ 5-5
Part locations ...................................... 2-1
Periodic maintenance and lubrication
chart ............................................... 6-2
Pre-operation check list ...................... 4-1
S
Safe-riding points ................................ 1-2
Seat ................................................... 3-12
Shock absorber assemblies,
adjusting ....................................... 3-14
Sidestand .......................................... 3-16
Spark plug, checking ......................... 6-11
Specifications ...................................... 8-1
Speedometer ...................................... 3-2
Starting off .......................................... 5-2
Starting the engine .............................. 5-1
Steering, checking ............................ 6-28
Storage ............................................... 7-3
