2004 YAMAHA BT1100 lock

PERIODIC MAINTENANCE AND MINOR REPAIR
1
1
2
EC000105
Do not touch the glass part of the head-
light bulb to keep it free from oil, other-
wise the transparency of the glass, the
luminosity of the bulb, and the bulb life
will be adversely affected.
Thoroughly clean off any dirt and fin-
gerprints on the headlight bulb using a
cloth moistened with alcohol or thin-
ner.
CAUTION:5. Install the headlight bulb cover, and
then connect the coupler and auxil-
iary light leads.
6. Remove the socket (together with the
bulb) by turning it counterclockwise.
7. Remove the defective bulb by push-
ing it in and turning it counterclock-
wise.
8. Insert a new bulb into the socket,
push it in, and then turn it clockwise
until it stops.
9. Install the socket (together with the
bulb) by turning it clockwise.10. Connect the auxiliary light bulb leads.
11. Tilt the cowling back to the original
position, and then install the headlight
by installing the screws.
EAU00462
6-30
6
1. Headlight bulb holder 1. Do not touch this area 1. Auxiliary light bulb holder
2. Auxiliary light bulb

EAU00462
1. Screw
2. Turn signal light len
PERIODIC MAINTENANCE AND MINOR REPAIR
1
2
1. Screw (x 2)
11
NOTE:
Before installing the headlight, be sure to
hook the headlight and auxiliary light bulb
leads into the guide to the left of the head-
light as shown.
12. Have a Yamaha dealer adjust the
headlight beam if necessary.
EAU03497
Replacing a turn signal light
bulb
1. Remove the turn signal light lens by
removing the screw.
2. Remove the defective bulb by push-
ing it in and turning it counterclock-
wise.
3. Insert a new bulb into the socket,
push it in, and then turn it clockwise
until it stops.
4. Install the lens by installing the screw.
EC000065
Do not overtighten the screw, other-
wise the lens may break.
CAUTION:
EAU01623
Replacing the tail/brake light
bulb
1. Remove the tail/brake light lens by re-
moving the screws.
2. Remove the defective bulb by push-
ing it in and turning it counterclock-
wise.
3. Insert a new bulb into the socket,
push it in, and then turn it clockwise
until it stops.
4. Install the lens by installing the
screws.
EC000108
Do not overtighten the screws, other-
wise the lens may break.
CAUTION:
6-31
6
1
1. Leads guide

INDEX
A
Air filter element, cleaning ....................6-10
Anti-theft alarm (optional) ......................3-8
Auxiliary light bulb, replacing ................6-29
B
Battery ..................................................6-26
Brake and clutch levers, checking
and Lubricating ..................................6-23
Brake and shift pedals, checking
and Lubricating ..................................6-23
Brake fluid, changing ............................6-21
Brake fluid level, checking ....................6-19
Brake lever ..........................................3-10
Brake pads, checking ..........................6-19
Brake pedal ..........................................3-10
Brake pedal position, adjusting ............6-18
C
Cables, checking and lubricating..........6-22
Carburetors, adjusting ..........................6-12
Care ........................................................7-1
Clock ......................................................3-5
Clutch lever ............................................3-9
Clutch lever free play, adjusting ..........6-17
Consumer information ............................9-1
Controls ..................................................2-3
Conversion table ....................................8-5
D
Description ..............................................2-1
Controls and instrument ......................2-3Left view ..............................................2-1
Right view ............................................2-2
E
Engine break-in ......................................5-4
Engine idling speed, adjusting..............6-12
Engine oil and oil filter element ..............6-7
Engine stop switch..................................3-9
F
Final gear oil ..........................................6-9
Front fork
Adjusting ............................................3-15
Checking ............................................6-24
Front wheel
Installing ............................................6-33
Removing ..........................................6-32
Fuel ......................................................3-11
Fuel consumption, tips for reducing ......5-4
Fuel level warning light ..........................3-3
Fuel tank breather hose ......................3-12
Fuel tank cap ........................................3-11
Fuses, replacing ..................................6-28
H
Handlebar switches ................................3-8
Headlight bulb, replacing ......................6-29
Helmet holders ....................................3-14
High beam indicator light ........................3-3
Horn switch ............................................3-8I
Identification numbers ............................9-1
Idling speed, adjusting ..........................6-12
Ignition circuit cut-off system ................3-17
Instrument and control functions ............2-3
Instruments ............................................2-3
K
Key identification number ......................9-1
L
License plate light bulb, replacing ........6-32
Light switch ............................................3-9
M
Main switch/steering lock ..........................3-1
Model label ................................................9-2
N
Neutral indicator light ..............................3-2
O
Oil level warning light ............................3-2
Operation and important riding points ....5-1
P
Panels, removing and installing..............6-5
Parking....................................................5-5
Pass switch ............................................3-8
Periodic maintenance and lubrication
chart ....................................................6-2

INDEX
Periodic maintenance
and minor repair ..................................6-1
Pre-operation check list ..........................4-1
Pre-operation checks..............................4-1
R
Rear wheel
Installing ............................................6-34
Removing ..........................................6-33
S
Safety information ..................................1-1
Seat ......................................................3-13
Self-diagnosis device..............................3-6
Shift pedal ............................................3-10
Adjusting the pedal position ..............6-21
Shifting ....................................................5-3
Shock absorber assembly
adjusting ............................................3-15
Sidestand ..............................................3-16
Sidestand, checking
and lubricating ....................................6-24
Spark plugs, checking ............................6-5
Specifications..........................................8-1
Conversion table ..................................8-5
Speedometer unit ..................................3-3
Starter (choke) lever ............................3-12
Starting a cold engine ............................5-1
Starting a warm engine ..........................5-3
Start switch ............................................3-9
Steering, checking ................................6-25
Steering lock ..........................................3-1Storage ..................................................7-4
Storage compartment ..........................3-14
T
Tachometer ............................................3-6
Tail/brake light bulb, replacing ..............6-31
Throttle cable free play, adjusting ........6-13
Throttle grip and cable, checking and
lubricating ..........................................6-22
Tires ......................................................6-14
Air pressure ........................................6-14
Tool kit ....................................................6-1
Troubleshooting ....................................6-35
Troubleshooting chart ..........................6-36
Turn signal indicator light........................3-2
Turn signal light bulb, replacing............6-31
Turn signal switch ..................................3-8
V
Valve clearance, adjusting ....................6-13
Vehicle identification number ..................9-1
W
Wheel bearings, checking ....................6-25
Wheels, cast ........................................6-16