2004 TOYOTA MR2 SPYDER Owners Manual

Page 25 of 259

TOYOTA MR2 SPYDER 2004 W30 / 3.G Owners Manual 172004 MR2 from Feb. ’04 Prod. (OM17518U)
SB12044a
2. In rear of the vehicle, lift the enginehood.
CAUTION
Be careful not to touch the engine
hood, the support rod, or surrounding
area which could b

Page 26 of 259

TOYOTA MR2 SPYDER 2004 W30 / 3.G Owners Manual 182004 MR2 from Feb. ’04 Prod. (OM17518U)
SB12087
LOCKING AND UNLOCKING WITH
ENGINE HOOD
To lock: Turn the key clockwise.
The engine hood lock release lever can
be locked by the key.
When leaving th

Page 27 of 259

TOYOTA MR2 SPYDER 2004 W30 / 3.G Owners Manual 192004 MR2 from Feb. ’04 Prod. (OM17518U)
CAUTION
Do not smoke, cause sparks or al-
low open flames when refueling.
The fumes are flammable.
When opening the cap, do not re-
move the cap quickly.

Page 28 of 259

TOYOTA MR2 SPYDER 2004 W30 / 3.G Owners Manual 202004 MR2 from Feb. ’04 Prod. (OM17518U)
SB12087
LOCKING AND UNLOCKING WITH FUEL
TANK CAP
To lock: Turn the key clockwise.
The fuel filler door opener lever can be
locked by the key.
When leaving t

Page 29 of 259

TOYOTA MR2 SPYDER 2004 W30 / 3.G Owners Manual 212004 MR2 from Feb. ’04 Prod. (OM17518U)
When the soft top is completely
lowered, keep the rear window de-
fogger turned off to avoid damage
to the top.
 It may be hard to fix the soft top
when r

Page 30 of 259

TOYOTA MR2 SPYDER 2004 W30 / 3.G Owners Manual 222004 MR2 from Feb. ’04 Prod. (OM17518U)
SB12072
3. Lower the soft top backward press-ing the rear window glass down soft-
ly.
SB12082a
CAUTION
To prevent personal injury, do not
grasp the part sho

Page 31 of 259

TOYOTA MR2 SPYDER 2004 W30 / 3.G Owners Manual 232004 MR2 from Feb. ’04 Prod. (OM17518U)
SB12059a
Folding boardFlare
NOTICE
Do not lower the soft top while
placing a luggage which is higher
than the bottom edge of the flare
inside the luggage s

Page 32 of 259

TOYOTA MR2 SPYDER 2004 W30 / 3.G Owners Manual 242004 MR2 from Feb. ’04 Prod. (OM17518U)
SB12074a
2. Stand outside of the vehicle and pullthe soft top out slowly holding the
part shown in dark color in the il-
lustration. Then move the soft top