106
Lights, Turn Signals and Windshield Wipers
Automatic Headlight Beam
AdjustmentVehicles with Bi-Xenon headlights feature
automatic headlight beam adjustment.
When the ignition and the low beam are switched
on, the level of the headlight beam automatically
changes in accordance with the vehicle load. The
level of the headlight beam is automatically kept
constant during acceleration and braking.
Checking operation
1. Switch the low beam on.
2. Switch ignition on.
The light beam first dips all the way down and
is then adapted to the vehicle load. It this test
item is not met, the headlight beam adjustment
system must be checked by an authorized
Porsche dealer.
Turn signal/High Beam/Headlight
Flasher StalkTurn signals, low beam and high beam are ready
for operation when the ignition is on.1 - Turn signal light, left
2 - Turn signal light, right
Move the stalk to the upper or lower pressure
point - turn signals flash three times
3 - High beam (push forward)
4 - Headlight flasher (pull backward)
Lever in center position - low beam
(when the light is switched on)
5 - Button for voice control
fPlease see the separate Owner’s Manual for
Porsche Communication Management (PCM).
Note on operation
When the high beam is switched on or the head-
light flasher is operated, the blue indicator light on
the speedometer is lit.
Parking lightThe parking light can only be switched on when
the ignition is switched off.
fMove the lever up or down to switch on the
right or left parking light.
10_Cayenne_21_KW17.book Seite 106 Donnerstag, 9. April 2009 3:33 15
