2004 PORSCHE 911 TURBO weight

The 911 Turbo easily complies
with all statutory requirements in
all markets worldwide in respect
of frontal, side, diagonal and rear
impact protection.
The reinforced bodyshell contains
a highly resilient passenger
cell offering exceptional crash
protection. At the front of the
car, the cell is protected by apatented system of longitudinal
and transverse members (1). In
the event of an accident, energy
is absorbed by three separate
load paths, one above the other,
which disperse the force of
impact and minimise deformation
of the passenger cell.The upper section of each door
features additional reinforcements
(4) which enhance the rigidity of
the car. An additional load path
(5) is used to channel energy
through the upper part of the shell
and protect the passenger cell.
In 1985, Porsche began using
super high-strength steel elements
in its door design to provide
greater occupant protection. On
the new 911 Turbo, this integral
reinforcement is made from
robust yet lightweight aluminium.
By increasing the proportion ofaluminium alloys and high-strength
steel, we’ve also increased the
car’s power-to-weight ratio. No less
than 20 % of the new 911 Turbo
is made from aluminium.
As you would expect, the entire
bodyshell structure receives
a highly effective anti-corrosion
treatment. Thirty years ago,
Porsche became the first manu-
facturer in the world to use
a hot-dip galvanised steel shell.
This exacting proces s is
absolutely fundamental to the
legendary durability of our cars.It also
ensures a consistently
high standard of crash protection,
even after many years on the
road. To underline our confidence
in this exceptional build quality,
the 911 Turbo comes with a
ten-year anti-corrosion warranty,
three-year paint warranty and
two-year warranty on the car as
a whole.
· 72 ·· 73 ·The new 911 Turbo |
Safety
1
1
1
5
4
3
3
12
Sheet steel
Tailored blanks
High-strength steel
Super high-strength steel
Aluminium Passive safety: bodyshell structure.
Adding strength, reducing weight.
Additional features include an
ultra-rigid bulkhead cross-member
(2) made from super high-strength
steel. This element is designed
to absorb impact forces from the
longitudinal members and thus
protect the front footwells. In a
minor collision, a system of easily
replaceable impact absorbers
(3) prevents costly damage to the
underlying bodyshell structure.

· 85 ·The new 911 Turbo |
Comfort
Luggage compartment.
In addition to the loadspace in the
rear seat area, the new 911 Turbo
has a 105-litre front luggage
compartment. The bulkhead
panelling conceals the standard
audio amplifier for the BOSE
®
Surround Sound System, as well
as the DVD drive for the
navigation module. The optional
CD autochanger is installed on the
right-hand side of the compartment
(looking forwards). The entire
compartment is lined with high-
quality, scratch-resistant
materials.
Roof transport system.
The optional roof transport
system is made from lightweight
aluminium, making it extremely
easy to fit. It is also styled to
match the exterior design as well
as the car’s aerodynamics. The
basic load-carrying bars can
be
combined with a range of
attachments from Porsche
Tequipment, including a roof box
and carriers for bikes, snowboards
and skis. Maximum roof load is
75 kg.
Anti-theft protection.
Standard anti-theft equipment
on the new 911 Turbo includes
an engine immobiliser with in-key
transponder. The comprehensive
alarm system features contact-
sensitive exterior protection and
radar-based interior surveillance.
Vehicle tracking system.
Optional protection includes a
factory-fitted preparation enabling
future installation of a vehicle
tracking system from Porsche
Tequipment. In the event of theft,
the system enables remote
tracking of the stolen vehicle
across most European countries.
Also requires special wiring
loom and higher capacity battery.
· 84 ·Luggage compartment
Roof transport system

At Porsche, we’re exploring every
possibility to improve the environ-
mental compatibility of our cars:
modern materials, reduced fuel
consumption, cleaner emissions,
fewer pollutants and better
recyclability. This commitment is a
Porsche tradition that began in
the 1960s. With the latest evolutionof the 911 Turbo, the rewards are
even greater than ever.
Exhaust emission control.
Combine engineering expertise
with a commitment to the
environment and the resulting
benefits are twofold: exceptional
performance and lower emissions.
One of the cleanest sportscars
in the world today, the new
911 Turbo easily complies with
both the stringent Euro 4 standard
in the European Union as well
as LEV II regulations in the United
States.The technologies used to achieve
this compliance include twin
‘lambda’ or oxygen sensors for
each of the two cylinder banks.
One pair of sensors is used to
measure the levels of oxygen in
each of the twin exhaust tracts.
An additional pair of sensors –
again, one in each tract – enablethe engine management system
to monitor the efficiency of the
catalytic converters.*
Recycling.
Lightweight construction, long-
term durability, exceptional
recyclability: just three of the
techniques employed by Porsche
to improve the environmental
compatibility of our cars.
On the new 911 Turbo, we’ve
used weight-saving design and
lightweight materials to achieve
excellent fuel economy.
All materials and manufacturing
processes have been carefully
selected and specifically refined
to reduce any impact on the
environment. A prime example is
the twin exhaust system, which is
made entirely from stainless steel.
All lightweight materials are easily
recyclable, while the variety ofsynthetics has been significantly
reduced. Recycled plastics are
used in every area of the car
where our exacting specifications
allow. To simplify processing, all
materials are labelled for separate
recycling. Approximately 85 % of
today’s 911 Turbo is compatible
with current recycling techniques.
Water-based paints are used
throughout the car, thus reducing
the need for chemical solvents in
both production and subsequent
servicing. Other harmful materials
omitted from the vehicle include
asbestos, CFCs, and components
manufactured using CFCs.
The result is a car in which
environmental protection is an
integral part of the overall design.
· 94 ·· 95 ·The new 911 Turbo |
Environment
* Not in markets with leaded fuel.
The 911 Turbo is dedicated to performance.
Also with respect to the environment.

· 124 ·· 125 ·The new 911 Turbo |
Summary
For every cubic centimetre,
even greater power and torque.
For every extra horsepower,
even lower weight.
For pure driving pleasure and
emphatic performance.
The new 911 Turbo.
Summary

· 126 ·· 127 ·
Technical data911 Turbo
WeightsManual/ Tiptronic S
Unladen weight (DIN)1,585 kg/1,620 kg
Unladen weight (EC)*1,660 kg/1,695 kg
Permissible gross weight1,950 kg/1,980 kg
PerformanceManual/ Tiptronic S
Top speed310 km / h/310 km / h (193 mph/193 mph)
0 –100 km / h (0 – 62 mph)3.9 secs/3.7 secs
0 –160 km / h (0 – 99 mph)8.4 secs/7.8 secs
0 – 200 km / h (0 –124 mph)12.8 secs/12.2 secs
Flexibility 80 –120 km / h 3.8 secs/3.5 secs
(50 –75 mph) in second highest gear
Fuel consumption/emissionsManual/ Tiptronic S
In accordance with 80 / 1268 /EC as valid at time of going to press**
Urban18.8/19.8 l/100 km (15.0/14.3 mpg)
Extra urban9.5/9.6 l/100 km (29.7/29.4 mpg)
Combined12.8/13.6 l/100 km (22.1/20.8 mpg)
CO2emissions307/326 g/km
Dimensions /aerodynamics
Length4,450 mm
Width1,852 mm
Height1,300 mm
Wheelbase2,350 mm
Luggage compartment volume105 litres
Tank capacity 67 litres
(refill volume)
Drag coefficient
0.31
911 Turbo
Engine
Cylinders6
Displacement3,600 cm3
Max. power (DIN)353 kW (480 bhp)
at6,000 rpm
Max. torque620 Nm (with overboost: 680 Nm)
at1,950 – 5,000 rpm (with overboost: 2,100 – 4,000 rpm)
Compression ratio9.0 :1
Transmission
LayoutAll-wheel drive with electronically controlled multi-plate clutch
Manual gearbox6-speed
Tiptronic S (optional)5-speed
Chassis
Front axleMcPherson-strut suspension
Rear axleLSA multi-link suspension
SteeringVariable steering ratio, power-assisted (hydraulic)
Turning circle10.9 m
Brakes6-piston monobloc aluminium fixed calipers at front, `
4-piston monobloc aluminium fixed calipers at rear,
discs internally vented and cross-drilled
Vehicle stability systemPSM (updated version)
Anti-lock braking systemABS 8.0
WheelsFront: 8.5J x 19 ET 56
Rear: 11J x 19 ET 51
Ty r e sFront: 235/35 ZR 19
Rear: 305/30 ZR 19* Weight is calculated in accordance with the relevant EC Directives and is valid for standard specification vehicles only.
Optional equipment means greater weight. The figure given includes 68 kg for the driver and 7 kg for luggage.
** Provisional data only. Final data unavailable at the time of going to press.