2004 NISSAN SENTRA cooling

[x] Cancel search: cooling

Page 152 of 248

NISSAN SENTRA 2004 B15 / 5.G Owners Manual If your vehicle is overheating (indicated by an
extremely high temperature gauge reading) , or if
you feel a lack of engine power, detect abnormal
noise, etc. take the following steps.
WARNING
cDo not

Page 154 of 248

NISSAN SENTRA 2004 B15 / 5.G Owners Manual CAUTION
cNever tow automatic transmission
models with the front wheels on the
ground or four wheels on the ground
(forward or backward) , as this may
cause serious and expensive damage to
the transmis

Page 163 of 248

NISSAN SENTRA 2004 B15 / 5.G Owners Manual 8 Maintenance and do-it-yourself
Maintenance requirements..........................8-2
General maintenance..............................8-2
Explanation of general maintenance items.........8-2
Mainten

Page 167 of 248

NISSAN SENTRA 2004 B15 / 5.G Owners Manual When performing any inspection or maintenance
work on your vehicle, always take care to prevent
serious accidental injury to yourself or damage to
the vehicle. The following are general precau-
tions

Page 170 of 248

NISSAN SENTRA 2004 B15 / 5.G Owners Manual The engine cooling system is filled at the factory
with a high-quality, year-round, anti-freeze cool-
ant solution. The anti-freeze solution contains
rust and corrosion inhibitors; therefore, addition

Page 171 of 248

NISSAN SENTRA 2004 B15 / 5.G Owners Manual CHANGING ENGINE COOLANT
Major cooling system repairs should be per-
formed by a NISSAN dealer. The service proce-
dures can be found in the NISSAN Service
Manual.
Improper servicing can result in redu

Page 172 of 248

NISSAN SENTRA 2004 B15 / 5.G Owners Manual 2. Open the drain plug on the engine block.
3. Open the radiator cap to drain the coolant.
cWaste coolant must be disposed of prop-
erly.
cCheck your local regulations.
4. Flush the cooling system by

Page 176 of 248

NISSAN SENTRA 2004 B15 / 5.G Owners Manual CAUTION
Be careful not to burn yourself. The engine
oil may be hot.
5. Wipe the engine oil filter mounting surface
with a clean rag.
Be sure to remove any old gasket material
remaining on the mounting
Page:   < prev 1-8 9-16 17-24 next >