GENERAL INFORMATION
SECTION
GI
MODIFICATION NOTICE:
+Load suspension for single cab 2WD A-chassis has been terminated.
+Specification for double cab 4WD E-grade has been modified.
+Low-geared final drive has been added to the KA24DE equipped models for the Middle East.
+265/70R16 size tire has been added as an option for Europe.
CONTENTS
CONSULT-II CHECKING SYSTEM..................... 6002
Function and System Application .................... 6002
Nickel Metal Hydride Battery Replacement ..... 6002
Checking Equipment ........................................ 6003
CONSULT-II Data Link Connector (DLC)
Circuit ............................................................... 6003IDENTIFICATION INFORMATION...................... 6004
Model Variation ................................................ 6004
Identification Number ....................................... 6005
Wheels and Tires ............................................. 6007
Dimensions ...................................................... 6008
This modification has been included in production starting with the following vehicle identification numbers
(Chassis number):
For Australia and New Zealand
JN1ADGD22A0040001
JN1ANUD22A0028001
JN1BNUD22A0030001
JN1CDGD22A0040001
JN1CRUD22A0020001
JN1CNUD22A0040001
For the Middle East
JN6DD23S*5A770101
JN6HD23S*5A770101
JN6DD23Y*5A770101
JN6PD23S*5A770101
JN6PD23Y*5A770101
For Europe
JN1CPUD22U0820101
For Israel
JN1CPGD225A707101
JN1CPUD225A707101
GI
Function and System Application
Diagnostic test
modeFunction ENGINE A/T ABS AIR BAG
Work supportThis mode enables a technician to
adjust some devices faster and more
accurate by following the indications
on CONSULT-II.xxÐÐ
Self-diagnostic
resultsSelf-diagnostic results can be read
and erased quickly.xxxx
Trouble diagnos-
tic recordCurrent self-diagnostic results and all
trouble diagnostic records previously
stored can be read.ÐÐÐ x
ECU discrimi-
nated No.Classification number of a replace-
ment ECU can be read to prevent an
incorrect ECU from being installed.ÐÐÐ x
Data monitorInput/Output data in the ECU (ECM)
can be read.xxxÐ
DTC work sup-
portThis mode enables a technician to
set operating conditions to confirm
self-diagnosis status/results.ÐxÐÐ
Active testDiagnostic Test Mode in which CON-
SULT-II drives some actuators apart
from the ECMs and also shifts some
parameters in a specified range.xÐxÐ
ECU (ECM) part
numberECU (ECM) part number can be
read.xxxÐ
Function testConducted by CONSULT-II instead
of a technician to determine whether
each system is ªOKº or ªNGº (No
Good).xxxx
x: Applicable
Nickel Metal Hydride Battery Replacement
CONSULT-II contains a nickel metal hydride battery. When replacing the battery obey the following:
WARNING:
Replace the nickel metal hydride battery with Genuine CONSULT-II battery only. Use of another bat-
tery may present a risk of fire or explosion. The battery may present a fire or chemical burn hazard
if mistreated. Do not recharge, disassemble of dispose of in fire.
Keep the battery out of reach of children and discard used battery conforming to the local regula-
tions.
CONSULT-II CHECKING SYSTEM
GI-6002
