2004 NISSAN PATHFINDER service

[x] Cancel search: service

Page 246 of 306

NISSAN PATHFINDER 2004 R50 / 2.G Owners Manual REPLACING SPARK PLUGS
WARNING
Be sure the engine and ignition switch
are off and that the parking brake is
engaged securely.
CAUTION
Be sure to use the correct socket toremove the spark plugs. An inco

Page 249 of 306

NISSAN PATHFINDER 2004 R50 / 2.G Owners Manual CHECKING BRAKE PEDALWith the engine running, check distance A
between the upper surface of the pedal and the
dash lower panel.
Distance A
M/T models
2-1/2 in (65 mm) or more
A/T models
2-3/4 in (70 mm

Page 264 of 306

NISSAN PATHFINDER 2004 R50 / 2.G Owners Manual Tire wear and damage
WARNING
Tires should be periodically in-
spected for wear, cracking, bulging or
objects caught in the tread. If exces-
sive wear, cracks, bulging or deep
cuts are found, the tire

Page 265 of 306

NISSAN PATHFINDER 2004 R50 / 2.G Owners Manual wheel is replaced, the low tire pres-
sure warning system will not func-
tion. Contact your NISSAN dealer as
soon as possible for tire replacement
and/or system resetting. (For models
with the low tir

Page 267 of 306

NISSAN PATHFINDER 2004 R50 / 2.G Owners Manual 9 Technical and consumer informationCapacities and recommended fuel/lubricants ................ 9-2
Fuel recommendation ...................................................... 9-4
Engine oil and oil fi

Page 271 of 306

NISSAN PATHFINDER 2004 R50 / 2.G Owners Manual unleaded gasoline with an octane rating of at
least 91 AKI (Anti-Knock Index) number
(VQ35DE engine). However, you may use un-
leaded gasoline with an octane rating as low as
85 AKI (Anti-Knock Index)

Page 274 of 306

NISSAN PATHFINDER 2004 R50 / 2.G Owners Manual ing system service. Your NISSAN dealer has the
trained technicians and equipment needed to
recover and recycle your air conditioning system
refrigerant.
Contact your NISSAN dealer when servicing
your

Page 275 of 306

NISSAN PATHFINDER 2004 R50 / 2.G Owners Manual ENGINE
ModelVQ35DE
TypeGasoline, 4-cycle
Cylinder arrangement6-cylinder, V-slanted at 60°
Bore×Stroke in (mm) 3.760×3.205 (95.5×81.4)
Displacement cu in (cm
3) 213.45 (3,498)
Firing order1-2-3-4-5
Page:   < prev 1-8 9-16 17-24 25-32 next >