2004 NISSAN MAXIMA reset

[x] Cancel search: reset

Page 134 of 280

NISSAN MAXIMA 2004 A34 / 6.G Owners Manual NOTE:
If you change the horn beep or the lamp
flash feature with the keyfob, the mode will
not be changed with the display. Use the
keyfob to return to the previous mode and
re-enable the display cont

Page 137 of 280

NISSAN MAXIMA 2004 A34 / 6.G Owners Manual Trip 1, trip 2 and fuel economy items
To reset the TRIP 1, TRIP 2 and FUEL
ECONOMY, select the“RESET”key using the
joystick and push the“ENTER”button or push
the“TRIP”button for more than

Page 141 of 280

NISSAN MAXIMA 2004 A34 / 6.G Owners Manual Setting daylight savings time:
Use the“Daylight Saving Time”key to adjust
the clock to daylight savings time.
ON: The displayed time advances by 1 hour.
OFF: The current time is displayed.Adjustin

Page 150 of 280

NISSAN MAXIMA 2004 A34 / 6.G Owners Manual 1. SEEK/APS REW, APS FF/TRACK
change button
2. TUNE/REW FF button
3. PAUSE/MUTE button
4. PROG/RPT button5. ON·OFF/VOLUME control knob
6. PRESET A-B-C select button
7. Station select buttons (1 - 6)

Page 151 of 280

NISSAN MAXIMA 2004 A34 / 6.G Owners Manual 1. SEEK/APS REW, APS FF/TRACK
change button
2. TUNE/REW FF button
3. PAUSE/MUTE button
4. PROG/RPT button5. ON·OFF/VOLUME control knob
6. PRESET A-B-C select button
7. Station and CD select buttons (

Page 153 of 280

NISSAN MAXIMA 2004 A34 / 6.G Owners Manual To release the mute or pause, push the button
again.
FM/AM/SAT radio operation
FM/AM/SAT radio select:
Pushing the FM-AM or SAT radio select button
will change the band as follows:
AMÃ!FM or SAT (Sat

Page 176 of 280

NISSAN MAXIMA 2004 A34 / 6.G Owners Manual cThe SET indicator light may blink when the
cruise control main switch is turned ON
while pushing the ACCEL/RES,
COAST/SET, or CANCEL switch (located
on the steering wheel) . To properly set the
cruis

Page 177 of 280

NISSAN MAXIMA 2004 A34 / 6.G Owners Manual To reset at a faster cruising speed,use one
of the following three methods.
cDepress the accelerator pedal. When the
vehicle attains the desired speed, push and
release the COAST/SET switch.
cPush and
Page:   < prev 1-8 9-16 17-24 next >